On 8/31/18 8:15 AM, Cédric Le Goater wrote:
> The SMC controllers have a register containing the byte that will be
> used as dummy output. It can be modified by software.
> 
> Signed-off-by: Cédric Le Goater <c...@kaod.org>
> ---
>  hw/ssi/aspeed_smc.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
> index da2fedfcd3cd..f31bbc895caa 100644
> --- a/hw/ssi/aspeed_smc.c
> +++ b/hw/ssi/aspeed_smc.c
> @@ -102,8 +102,8 @@
>  /* Misc Control Register #1 */
>  #define R_MISC_CTRL1      (0x50 / 4)
>  
> -/* Misc Control Register #2 */
> -#define R_MISC_CTRL2      (0x54 / 4)
> +/* SPI dummy cycle data */
> +#define R_DUMMY_DATA      (0x54 / 4)
>  
>  /* DMA Control/Status Register */
>  #define R_DMA_CTRL        (0x80 / 4)
> @@ -548,7 +548,7 @@ static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, 
> uint32_t addr)
>       */
>      if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) {
>          for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) {
> -            ssi_transfer(fl->controller->spi, 0xFF);
> +            ssi_transfer(fl->controller->spi, s->regs[R_DUMMY_DATA] & 0xff);

The DUMMY_DATA register always contains a 8-bit value, so this AND
shouldn't be necessary. Regardless:

Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>


>          }
>      }
>  }
> @@ -680,6 +680,7 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr 
> addr, unsigned int size)
>          addr == s->r_timings ||
>          addr == s->r_ce_ctrl ||
>          addr == R_INTR_CTRL ||
> +        addr == R_DUMMY_DATA ||
>          (s->ctrl->has_dma && addr == R_DMA_CTRL) ||
>          (s->ctrl->has_dma && addr == R_DMA_FLASH_ADDR) ||
>          (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) ||
> @@ -912,6 +913,8 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, 
> uint64_t data,
>          }
>      } else if (addr == R_INTR_CTRL) {
>          s->regs[addr] = value;
> +    } else if (addr == R_DUMMY_DATA) {
> +        s->regs[addr] = value & 0xff ;
>      } else if (s->ctrl->has_dma && addr == R_DMA_CTRL) {
>          aspeed_smc_dma_ctrl(s, value);
>      } else if (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) {
> 

Reply via email to