Hi Thomas, On 3/11/19 12:17 PM, Thomas Huth wrote: > On 11/03/2019 01.56, Philippe Mathieu-Daudé wrote: >> The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ. The >> framebuffer display is managed by a G364, the network card is a Sonic >> DP83932. A QLogic ESP216 provides a SCSI bus. >> >> Signed-off-by: Philippe Mathieu-Daudé <phi...@redhat.com> >> --- >> v3: Keep CONFIG_JAZZ in default-configs/mips64el-softmmu.mak (Thomas) >> --- >> default-configs/mips-softmmu-common.mak | 1 - >> default-configs/mips64-softmmu.mak | 5 ----- >> default-configs/mips64el-softmmu.mak | 5 ----- >> hw/mips/Kconfig | 17 +++++++++++++++++ >> 4 files changed, 17 insertions(+), 11 deletions(-) >> >> diff --git a/default-configs/mips-softmmu-common.mak >> b/default-configs/mips-softmmu-common.mak >> index 8c5fdf5ee1..caebafd416 100644 >> --- a/default-configs/mips-softmmu-common.mak >> +++ b/default-configs/mips-softmmu-common.mak >> @@ -3,7 +3,6 @@ >> CONFIG_ISA_BUS=y >> CONFIG_PCI=y >> CONFIG_PCI_DEVICES=y >> -CONFIG_ESP=y >> CONFIG_VGA_ISA=y >> CONFIG_VGA_ISA_MM=y >> CONFIG_VGA_CIRRUS=y >> diff --git a/default-configs/mips64-softmmu.mak >> b/default-configs/mips64-softmmu.mak >> index bad7496672..a169738635 100644 >> --- a/default-configs/mips64-softmmu.mak >> +++ b/default-configs/mips64-softmmu.mak >> @@ -1,9 +1,4 @@ >> # Default configuration for mips64-softmmu >> >> include mips-softmmu-common.mak >> -CONFIG_RC4030=y >> -CONFIG_DP8393X=y >> -CONFIG_DS1225Y=y >> CONFIG_JAZZ=y >> -CONFIG_G364FB=y >> -CONFIG_JAZZ_LED=y >> diff --git a/default-configs/mips64el-softmmu.mak >> b/default-configs/mips64el-softmmu.mak >> index 8b255efc54..a7b88318b2 100644 >> --- a/default-configs/mips64el-softmmu.mak >> +++ b/default-configs/mips64el-softmmu.mak >> @@ -2,13 +2,8 @@ >> >> include mips-softmmu-common.mak >> CONFIG_IDE_VIA=y >> -CONFIG_RC4030=y >> -CONFIG_DP8393X=y >> -CONFIG_DS1225Y=y >> CONFIG_FULONG=y >> CONFIG_JAZZ=y >> -CONFIG_G364FB=y >> -CONFIG_JAZZ_LED=y >> CONFIG_VT82C686=y >> CONFIG_AHCI=y >> CONFIG_MIPS_BOSTON=y >> diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig >> index 3433e97e1a..ab006477c7 100644 >> --- a/hw/mips/Kconfig >> +++ b/hw/mips/Kconfig >> @@ -12,6 +12,23 @@ config MIPSSIM >> >> config JAZZ >> bool >> + select ISA_BUS >> + select RC4030 >> + select I8259 >> + select I8254 >> + select I8257 >> + select PCSPK >> + select VGA_ISA_MM >> + select G364FB >> + select DP8393X > > Looking at the code, it seems like you can also run the machine with > "-net none", so I'd rather use "imply DP8393X" here instead.
Well here I'm not sure. For the both machine variants (PICA-61 and Magnum 4000), the chipset is soldered on the board, and is MMIO mapped (via a ChipSelect, no via a bus you can plug/unplug). So it looks the code inherited habits from boards having network card via busses. Not sure the code can be fixed in time for soft freeze. I might improve the commit message explaining this chipset is soldered on the board. Regards, Phil.
