Thanks,
Aleksandar
diff --git a/hw/avr/sample.c b/hw/avr/sample.c
new file mode 100644
index 0000000000..2295ec1b79
--- /dev/null
+++ b/hw/avr/sample.c
@@ -0,0 +1,282 @@
+/*
+ * QEMU AVR CPU
+ *
+ * Copyright (c) 2019 Michael Rolnik
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later
version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/lgpl-2.1.html>
+ */
+
+/*
+ * NOTE:
+ * This is not a real AVR board, this is an example!
+ * The CPU is an approximation of an ATmega2560, but is
missing various
+ * built-in peripherals.
+ *
+ * This example board loads provided binary file into
flash memory and
+ * executes it from 0x00000000 address in the code memory
space.
+ *
+ * Currently used for AVR CPU validation
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/qtest.h"
+#include "ui/console.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "qemu/error-report.h"
+#include "exec/address-spaces.h"
+#include "include/hw/sysbus.h"
+#include "include/hw/char/avr_usart.h"
+#include "include/hw/timer/avr_timer16.h"
+#include "include/hw/misc/avr_mask.h"
+#include "elf.h"
+#include "hw/misc/unimp.h"
+
+#define SIZE_FLASH 0x00040000
+#define SIZE_SRAM 0x00002000
+/*
+ * Size of additional "external" memory, as if the AVR were
configured to use
+ * an external RAM chip.
+ * Note that the configuration registers that normally enable
this feature are
+ * unimplemented.
+ */
+#define SIZE_EXMEM 0x00000000
+
+/* Offsets of peripherals in emulated memory space (i.e. not
host addresses) */
+#define PRR0_BASE 0x64
+#define PRR1_BASE 0x65
+#define USART_BASE 0xc0
+#define TIMER1_BASE 0x80
+#define TIMER1_IMSK_BASE 0x6f
+#define TIMER1_IFR_BASE 0x36
+
+/* Interrupt numbers used by peripherals */
+#define USART_RXC_IRQ 24
+#define USART_DRE_IRQ 25
+#define USART_TXC_IRQ 26
+
+#define TIMER1_CAPT_IRQ 15
+#define TIMER1_COMPA_IRQ 16
+#define TIMER1_COMPB_IRQ 17
+#define TIMER1_COMPC_IRQ 18
+#define TIMER1_OVF_IRQ 19
+
+/* Power reduction */
+#define PRR1_BIT_PRTIM5 0x05 /* Timer/Counter5 */
+#define PRR1_BIT_PRTIM4 0x04 /* Timer/Counter4 */
+#define PRR1_BIT_PRTIM3 0x03 /* Timer/Counter3 */
+#define PRR1_BIT_PRUSART3 0x02 /* USART3 */
+#define PRR1_BIT_PRUSART2 0x01 /* USART2 */
+#define PRR1_BIT_PRUSART1 0x00 /* USART1 */
+
+#define PRR0_BIT_PRTWI 0x06 /* TWI */
+#define PRR0_BIT_PRTIM2 0x05 /* Timer/Counter2 */
+#define PRR0_BIT_PRTIM0 0x04 /* Timer/Counter0 */
+#define PRR0_BIT_PRTIM1 0x03 /* Timer/Counter1 */
+#define PRR0_BIT_PRSPI 0x02 /* Serial Peripheral
Interface */
+#define PRR0_BIT_PRUSART0 0x01 /* USART0 */
+#define PRR0_BIT_PRADC 0x00 /* ADC */
+
+typedef struct {
+ MachineClass parent;
+} SampleMachineClass;
+
+typedef struct {
+ MachineState parent;
+ MemoryRegion *ram;
+ MemoryRegion *flash;
+ AVRUsartState *usart0;
+ AVRTimer16State *timer1;
+ AVRMaskState *prr[2];
+} SampleMachineState;
+
+#define TYPE_SAMPLE_MACHINE MACHINE_TYPE_NAME("sample")
+
+#define SAMPLE_MACHINE(obj) \
+ OBJECT_CHECK(SampleMachineState, obj, TYPE_SAMPLE_MACHINE)
+#define SAMPLE_MACHINE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(SampleMachineClass, obj, TYPE_SAMPLE_MACHINE)
+#define SAMPLE_MACHINE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(SampleMachineClass, klass,
TYPE_SAMPLE_MACHINE)
+
+static void sample_init(MachineState *machine)
+{
+ SampleMachineState *sms = SAMPLE_MACHINE(machine);
+ MemoryRegion *system_memory = get_system_memory();
+ AVRCPU *cpu;
+ const char *firmware = NULL;
+ const char *filename;
+ int bytes_loaded;
+ SysBusDevice *busdev;
+ DeviceState *cpudev;
+
+ system_memory = get_system_memory();
+ sms->ram = g_new(MemoryRegion, 1);
+ sms->flash = g_new(MemoryRegion, 1);
+
+ cpu = AVR_CPU(cpu_create(machine->cpu_type));
+ cpudev = DEVICE(cpu);
+
+
+ memory_region_init_rom(sms->flash, NULL, "avr.flash",
SIZE_FLASH,
+ &error_fatal);
+ memory_region_add_subregion(system_memory, OFFSET_CODE,
sms->flash);
+
+ /* following are atmel2560 device */
+ create_unimplemented_device("usart 3", OFFSET_DATA +
0x0130, 0x0007);
+ create_unimplemented_device("timer-counter-16bit 5",
+ OFFSET_DATA + 0x0120, 0x000e);
+ create_unimplemented_device("gpio L", OFFSET_DATA + 0x0109,
0x0003);
+ create_unimplemented_device("gpio K", OFFSET_DATA + 0x0106,
0x0003);
+ create_unimplemented_device("gpio J", OFFSET_DATA + 0x0103,
0x0003);
+ create_unimplemented_device("gpio H", OFFSET_DATA + 0x0100,
0x0003);
+ create_unimplemented_device("usart 2", OFFSET_DATA +
0x00d0, 0x0007);
+ create_unimplemented_device("usart 1", OFFSET_DATA +
0x00c8, 0x0007);
+ create_unimplemented_device("usart 0", OFFSET_DATA +
0x00c0, 0x0007);
+ create_unimplemented_device("twi", OFFSET_DATA + 0x00b8,
0x0006);
+ create_unimplemented_device("timer-counter-async-8bit 2",
+ OFFSET_DATA + 0x00b0, 0x0007);
+ create_unimplemented_device("timer-counter-16bit 4",
+ OFFSET_DATA + 0x00a0, 0x000e);
+ create_unimplemented_device("timer-counter-16bit 3",
+ OFFSET_DATA + 0x0090, 0x000e);
+ create_unimplemented_device("timer-counter-16bit 1",
+ OFFSET_DATA + 0x0080, 0x000e);
+ create_unimplemented_device("ac / adc",
+ OFFSET_DATA + 0x0078, 0x0008);
+ create_unimplemented_device("ext-mem-iface",
+ OFFSET_DATA + 0x0074, 0x0002);
+ create_unimplemented_device("int-controller",
+ OFFSET_DATA + 0x0068, 0x000c);
+ create_unimplemented_device("sys",
+ OFFSET_DATA + 0x0060, 0x0007);
+ create_unimplemented_device("spi",
+ OFFSET_DATA + 0x004c, 0x0003);
+ create_unimplemented_device("ext-mem-iface",
+ OFFSET_DATA + 0x004a, 0x0002);
+ create_unimplemented_device("timer-counter-pwm-8bit 0",
+ OFFSET_DATA + 0x0043, 0x0006);
+ create_unimplemented_device("ext-mem-iface",
+ OFFSET_DATA + 0x003e, 0x0005);
+ create_unimplemented_device("int-controller",
+ OFFSET_DATA + 0x0035, 0x0009);
+ create_unimplemented_device("gpio G", OFFSET_DATA + 0x0032,
0x0003);
+ create_unimplemented_device("gpio F", OFFSET_DATA + 0x002f,
0x0003);
+ create_unimplemented_device("gpio E", OFFSET_DATA + 0x002c,
0x0003);
+ create_unimplemented_device("gpio D", OFFSET_DATA + 0x0029,
0x0003);
+ create_unimplemented_device("gpio C", OFFSET_DATA + 0x0026,
0x0003);
+ create_unimplemented_device("gpio B", OFFSET_DATA + 0x0023,
0x0003);
+ create_unimplemented_device("gpio A", OFFSET_DATA + 0x0020,
0x0003);
+
+ memory_region_allocate_system_memory(
+ sms->ram, NULL, "avr.ram", SIZE_SRAM + SIZE_EXMEM);
+ memory_region_add_subregion(system_memory, OFFSET_DATA +
0x200, sms->ram);
+
+ /* Power Reduction built-in peripheral */
+ sms->prr[0] = AVR_MASK(sysbus_create_simple(TYPE_AVR_MASK,
+ OFFSET_DATA + PRR0_BASE, NULL));
+ sms->prr[1] = AVR_MASK(sysbus_create_simple(TYPE_AVR_MASK,
+ OFFSET_DATA + PRR1_BASE, NULL));
+
+ /* USART 0 built-in peripheral */
+ sms->usart0 = AVR_USART(object_new(TYPE_AVR_USART));
+ busdev = SYS_BUS_DEVICE(sms->usart0);
+ qdev_prop_set_chr(DEVICE(sms->usart0), "chardev",
serial_hd(0));
+ object_property_set_bool(OBJECT(sms->usart0), true, "realized",
+ &error_fatal);
+ sysbus_mmio_map(busdev, 0, OFFSET_DATA + USART_BASE);
+ /*
+ * These IRQ numbers don't match the datasheet because
we're counting from
+ * zero and not including reset.
+ */
+ sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
USART_RXC_IRQ));
+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
USART_DRE_IRQ));
+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
USART_TXC_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(sms->prr[1]),
PRR1_BIT_PRUSART1,
+ qdev_get_gpio_in(DEVICE(sms->usart0), 0));
+
+ /* Timer 1 built-in periphal */
+ sms->timer1 = AVR_TIMER16(object_new(TYPE_AVR_TIMER16));
+ object_property_set_bool(OBJECT(sms->timer1), true, "realized",
+ &error_fatal);
+ busdev = SYS_BUS_DEVICE(sms->timer1);
+ sysbus_mmio_map(busdev, 0, OFFSET_DATA + TIMER1_BASE);
+ sysbus_mmio_map(busdev, 1, OFFSET_DATA + TIMER1_IMSK_BASE);
+ sysbus_mmio_map(busdev, 2, OFFSET_DATA + TIMER1_IFR_BASE);
+ sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(cpudev,
TIMER1_CAPT_IRQ));
+ sysbus_connect_irq(busdev, 1, qdev_get_gpio_in(cpudev,
TIMER1_COMPA_IRQ));
+ sysbus_connect_irq(busdev, 2, qdev_get_gpio_in(cpudev,
TIMER1_COMPB_IRQ));
+ sysbus_connect_irq(busdev, 3, qdev_get_gpio_in(cpudev,
TIMER1_COMPC_IRQ));
+ sysbus_connect_irq(busdev, 4, qdev_get_gpio_in(cpudev,
TIMER1_OVF_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(sms->prr[0]),
PRR0_BIT_PRTIM1,
+ qdev_get_gpio_in(DEVICE(sms->timer1), 0));
+
+ /* Load firmware (contents of flash) trying to auto-detect
format */
+ firmware = machine->firmware;
+ if (firmware != NULL) {
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware);
+ if (filename == NULL) {
+ error_report("Unable to find %s", firmware);
+ exit(1);
+ }
+
+ bytes_loaded = load_elf(
+ filename, NULL, NULL, NULL, NULL, NULL, NULL, 0,
EM_NONE, 0, 0);
+ if (bytes_loaded < 0) {
+ bytes_loaded = load_image_targphys(
+ filename, OFFSET_CODE, SIZE_FLASH);
+ }
+ if (bytes_loaded < 0) {
+ error_report(
+ "Unable to load firmware image %s as ELF or raw
binary",
+ firmware);
+ exit(1);
+ }
+ }
+}
+
+static void sample_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->desc = "AVR sample/example board (ATmega2560)";
+ mc->init = sample_init;
+ mc->default_cpus = 1;
+ mc->min_cpus = mc->default_cpus;
+ mc->max_cpus = mc->default_cpus;
+ mc->default_cpu_type = "avr6-avr-cpu"; /* ATmega2560. */
+ mc->is_default = 1;
+}
+
+static const TypeInfo sample_info = {
+ .name = TYPE_SAMPLE_MACHINE,
+ .parent = TYPE_MACHINE,
+ .instance_size = sizeof(SampleMachineState),
+ .class_size = sizeof(SampleMachineClass),
+ .class_init = sample_class_init,
+};
+
+static void sample_machine_init(void)
+{
+ type_register_static(&sample_info);
+}
+
+type_init(sample_machine_init);
diff --git a/hw/Kconfig b/hw/Kconfig
index b9685b3944..07b8abb342 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -44,6 +44,7 @@ source watchdog/Kconfig
# arch Kconfig
source arm/Kconfig
source alpha/Kconfig
+source avr/Kconfig
source cris/Kconfig
source hppa/Kconfig
source i386/Kconfig
diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
new file mode 100644
index 0000000000..92aa1e6afb
--- /dev/null
+++ b/hw/avr/Kconfig
@@ -0,0 +1,6 @@
+config AVR_SAMPLE
+ bool
+ select AVR_TIMER16
+ select AVR_USART
+ select AVR_MASK
+ select UNIMP
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
new file mode 100644
index 0000000000..626b7064b3
--- /dev/null
+++ b/hw/avr/Makefile.objs
@@ -0,0 +1 @@
+obj-y += sample.o
--
2.17.2 (Apple Git-113)
--
Best Regards,
Michael Rolnik
