On Tue, Dec 17, 2019 at 07:27:28PM +0100, Philippe Mathieu-Daudé wrote: > The kernel image and DeviceTree blob are built by the Raspbian > project (based on Debian): > https://www.raspbian.org/RaspbianImages > > The SD image is from the kernelci.org project: > https://kernelci.org/faq/#the-code > > If ARM is a target being built, "make check-acceptance" will > automatically include this test by the use of the "arch:arm" tags. > > Alternatively, this test can be run using: > > $ avocado --show=console run -t machine:orangepi-pc > tests/acceptance/boot_linux_console.py > console: Uncompressing Linux... done, booting the kernel. > console: Booting Linux on physical CPU 0x0 > console: Linux version 4.20.7-sunxi (r...@armbian.com) (gcc version 7.2.1 > 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019 > console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d > [...] > console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, > nowayout=0) > console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2 > console: sunxi-mmc 1c0f000.mmc: Got CD GPIO > console: ledtrig-cpu: registered to indicate activity on CPUs > console: hidraw: raw HID events driver (C) Jiri Kosina > console: usbcore: registered new interface driver usbhid > console: usbhid: USB HID core driver > console: Initializing XFRM netlink socket > console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB > console: NET: Registered protocol family 10 > console: mmc0: host does not support reading read-only switch, assuming > write-enable > console: mmc0: Problem switching card into high-speed mode! > console: mmc0: new SD card at address 4567 > console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB > [...] > console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 > subsystem > console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null) > console: VFS: Mounted root (ext2 filesystem) on device 179:0. > console: Run /sbin/init as init process > console: EXT4-fs (mmcblk0): re-mounted. Opts: > block_validity,barrier,user_xattr,acl > console: Starting syslogd: OK > console: Starting klogd: OK > console: Populating /dev using udev: udevd[203]: starting version 3.2.7 > console: /bin/sh: can't access tty; job control turned off > console: cat /proc/partitions > console: / # cat /proc/partitions > console: major minor #blocks name > console: 1 0 4096 ram0 > console: 1 1 4096 ram1 > console: 1 2 4096 ram2 > console: 1 3 4096 ram3 > console: 179 0 61440 mmcblk0 > console: reboot > console: / # reboot > console: umount: devtmpfs busy - remounted read-only > console: EXT4-fs (mmcblk0): re-mounted. Opts: (null) > console: The system is going down NOW! > console: Sent SIGTERM to all processes > console: Sent SIGKILL to all processes > console: Requesting system reboot > console: reboot: Restarting system > JOB TIME : 68.64 s > > Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org> > --- > tests/acceptance/boot_linux_console.py | 42 ++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/tests/acceptance/boot_linux_console.py > b/tests/acceptance/boot_linux_console.py > index daabd47404..8179b45910 100644 > --- a/tests/acceptance/boot_linux_console.py > +++ b/tests/acceptance/boot_linux_console.py > @@ -478,6 +478,48 @@ class BootLinuxConsole(Test): > exec_command_and_wait_for_pattern(self, 'reboot', > 'reboot: Restarting system') > > + def test_arm_orangepi_sd(self):
Same suggestion wrt test name as previous two patches. > + """ > + :avocado: tags=arch:arm > + :avocado: tags=machine:orangepi-pc > + """ > + deb_url = ('https://apt.armbian.com/pool/main/l/' > + 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') > + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' > + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) > + kernel_path = self.extract_from_deb(deb_path, > + '/boot/vmlinuz-4.20.7-sunxi') > + dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' > + dtb_path = self.extract_from_deb(deb_path, dtb_path) > + rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/' > + 'kci-2019.02/armel/base/rootfs.ext2.xz') > + rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061' > + rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash) > + rootfs_path = os.path.join(self.workdir, 'rootfs.cpio') > + archive.lzma_uncompress(rootfs_path_xz, rootfs_path) > + > + self.vm.set_machine('orangepi-pc') Can/should be dropped. With this, Tested-by: Cleber Rosa <cr...@redhat.com> Reviewed-by: Cleber Rosa <cr...@redhat.com>
signature.asc
Description: PGP signature