USB ports must be instantiated as TYPE_CHIPIDEA to work.
Linux expects and checks various chipidea registers, which
do not exist with the basic ehci emulation.

Without this patch, USB ports fail to instantiate under Linux.

ci_hdrc ci_hdrc.0: doesn't support host
ci_hdrc ci_hdrc.0: no supported roles

With this patch, USB ports are instantiated, and it is possible
to boot from USB drive.

ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
usb 1-1: new full-speed USB device number 2 using ci_hdrc
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has invalid maxpacket 
512, setting to 64
usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x2 has invalid maxpacket 
512, setting to 64
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1:1.0

Signed-off-by: Guenter Roeck <li...@roeck-us.net>
---
 hw/arm/xilinx_zynq.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 3a0fa5b23f..b4a8b2f2c6 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -29,6 +29,7 @@
 #include "hw/loader.h"
 #include "hw/misc/zynq-xadc.h"
 #include "hw/ssi/ssi.h"
+#include "hw/usb/chipidea.h"
 #include "qemu/error-report.h"
 #include "hw/sd/sdhci.h"
 #include "hw/char/cadence_uart.h"
@@ -228,8 +229,8 @@ static void zynq_init(MachineState *machine)
     zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false);
     zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true);
 
-    sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
-    sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
+    sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]);
+    sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]);
 
     cadence_uart_create(0xE0000000, pic[59 - IRQ_OFFSET], serial_hd(0));
     cadence_uart_create(0xE0001000, pic[82 - IRQ_OFFSET], serial_hd(1));
-- 
2.17.1


Reply via email to