Implement a model of the MPS2 with the AN500 firmware. This is similar to the AN385, with the following differences: * Cortex-M7 CPU * PSRAM is at 0x6000_0000 * Ethernet is at 0xa000_0000 * No zbt_boot_ctrl remapping of the low 16K (but QEMU doesn't implement this anyway) * no "block RAM" at 0x01000000
Signed-off-by: Peter Maydell <peter.mayd...@linaro.org> --- The AN500 also defines some behaviour for CFG_REG[2567] in the SCC (QEMU hw/misc/mps2-scc.c) but none of it is anything QEMU can conveniently support so I have left that code as-is (a guest accessing those registers will hit the LOG_GUEST_ERROR case for "bad offset"). Tested with a buildroot image created using the instructions at: https://community.arm.com/developer/tools-software/oss-platforms/w/docs/578/running-uclinux-on-the-arm-mps2-platform and the "arm_mps2_CM7fpga" defconfig; QEMU commandline is qemu-system-arm -M mps2-an500 -serial stdio -display none -kernel boot.axf -device loader,file=linux.axf --- docs/system/arm/mps2.rst | 6 ++-- hw/arm/mps2.c | 71 ++++++++++++++++++++++++++++++++-------- 2 files changed, 62 insertions(+), 15 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index e680a4ceb71..7f2e9c8d52e 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -1,5 +1,5 @@ -Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) -================================================================================================ +Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) +================================================================================================================ These board models all use Arm M-profile CPUs. @@ -14,6 +14,8 @@ QEMU models the following FPGA images: Cortex-M3 as documented in ARM Application Note AN385 ``mps2-an386`` Cortex-M4 as documented in ARM Application Note AN386 +``mps2-an500`` + Cortex-M7 as documented in ARM Application Note AN500 ``mps2-an511`` Cortex-M3 'DesignStart' as documented in AN511 ``mps2-an505`` diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index 559b297e788..d17fd7a7cb5 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -16,6 +16,7 @@ * We model the following FPGA images: * "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385 * "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386 + * "mps2-an500" -- Cortex-M7 as documented in ARM Application Note AN500 * "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511 * * Links to the TRM for the board itself and to the various Application @@ -49,6 +50,7 @@ typedef enum MPS2FPGAType { FPGA_AN385, FPGA_AN386, + FPGA_AN500, FPGA_AN511, } MPS2FPGAType; @@ -56,6 +58,9 @@ typedef struct { MachineClass parent; MPS2FPGAType fpga_type; uint32_t scc_id; + bool has_block_ram; + hwaddr ethernet_base; + hwaddr psram_base; } MPS2MachineClass; typedef struct { @@ -82,6 +87,7 @@ typedef struct { #define TYPE_MPS2_MACHINE "mps2" #define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385") #define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386") +#define TYPE_MPS2_AN500_MACHINE MACHINE_TYPE_NAME("mps2-an500") #define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511") #define MPS2_MACHINE(obj) \ @@ -143,13 +149,14 @@ static void mps2_common_init(MachineState *machine) * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily * call the 16MB our "system memory", as it's the largest lump. * - * Common to both boards: - * 0x21000000..0x21ffffff : PSRAM (16MB) - * AN385/AN386 only: + * AN385/AN386/AN511: + * 0x21000000 .. 0x21ffffff : PSRAM (16MB) + * AN385/AN386/AN500: * 0x00000000 .. 0x003fffff : ZBT SSRAM1 * 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1 * 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3 * 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3 + * AN385/AN386 only: * 0x01000000 .. 0x01003fff : block RAM (16K) * 0x01004000 .. 0x01007fff : mirror of above * 0x01008000 .. 0x0100bfff : mirror of above @@ -159,22 +166,17 @@ static void mps2_common_init(MachineState *machine) * 0x00400000 .. 0x007fffff : ZBT SSRAM1 * 0x20000000 .. 0x2001ffff : SRAM * 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3 + * AN500 only: + * 0x60000000 .. 0x60ffffff : PSRAM (16MB) * * The AN385/AN386 has a feature where the lowest 16K can be mapped * either to the bottom of the ZBT SSRAM1 or to the block RAM. * This is of no use for QEMU so we don't implement it (as if * zbt_boot_ctrl is always zero). */ - memory_region_add_subregion(system_memory, 0x21000000, machine->ram); + memory_region_add_subregion(system_memory, mmc->psram_base, machine->ram); - switch (mmc->fpga_type) { - case FPGA_AN385: - case FPGA_AN386: - make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000); - make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000); - make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000); - make_ram_alias(&mms->ssram23_m, "mps.ssram23_m", - &mms->ssram23, 0x20400000); + if (mmc->has_block_ram) { make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000); make_ram_alias(&mms->blockram_m1, "mps.blockram_m1", &mms->blockram, 0x01004000); @@ -182,6 +184,17 @@ static void mps2_common_init(MachineState *machine) &mms->blockram, 0x01008000); make_ram_alias(&mms->blockram_m3, "mps.blockram_m3", &mms->blockram, 0x0100c000); + } + + switch (mmc->fpga_type) { + case FPGA_AN385: + case FPGA_AN386: + case FPGA_AN500: + make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000); + make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000); + make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000); + make_ram_alias(&mms->ssram23_m, "mps.ssram23_m", + &mms->ssram23, 0x20400000); break; case FPGA_AN511: make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000); @@ -198,6 +211,7 @@ static void mps2_common_init(MachineState *machine) switch (mmc->fpga_type) { case FPGA_AN385: case FPGA_AN386: + case FPGA_AN500: qdev_prop_set_uint32(armv7m, "num-irq", 32); break; case FPGA_AN511: @@ -235,6 +249,7 @@ static void mps2_common_init(MachineState *machine) switch (mmc->fpga_type) { case FPGA_AN385: case FPGA_AN386: + case FPGA_AN500: { /* The overflow IRQs for UARTs 0, 1 and 2 are ORed together. * Overflow for UARTs 4 and 5 doesn't trigger any interrupt. @@ -384,7 +399,7 @@ static void mps2_common_init(MachineState *machine) /* In hardware this is a LAN9220; the LAN9118 is software compatible * except that it doesn't support the checksum-offload feature. */ - lan9118_init(&nd_table[0], 0x40200000, + lan9118_init(&nd_table[0], mmc->ethernet_base, qdev_get_gpio_in(armv7m, mmc->fpga_type == FPGA_AN511 ? 47 : 13)); @@ -413,6 +428,9 @@ static void mps2_an385_class_init(ObjectClass *oc, void *data) mmc->fpga_type = FPGA_AN385; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); mmc->scc_id = 0x41043850; + mmc->psram_base = 0x21000000; + mmc->ethernet_base = 0x40200000; + mmc->has_block_ram = true; } static void mps2_an386_class_init(ObjectClass *oc, void *data) @@ -424,6 +442,23 @@ static void mps2_an386_class_init(ObjectClass *oc, void *data) mmc->fpga_type = FPGA_AN386; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); mmc->scc_id = 0x41043860; + mmc->psram_base = 0x21000000; + mmc->ethernet_base = 0x40200000; + mmc->has_block_ram = true; +} + +static void mps2_an500_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN500 FPGA image for Cortex-M7"; + mmc->fpga_type = FPGA_AN500; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m7"); + mmc->scc_id = 0x41045000; + mmc->psram_base = 0x60000000; + mmc->ethernet_base = 0xa0000000; + mmc->has_block_ram = false; } static void mps2_an511_class_init(ObjectClass *oc, void *data) @@ -435,6 +470,9 @@ static void mps2_an511_class_init(ObjectClass *oc, void *data) mmc->fpga_type = FPGA_AN511; mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3"); mmc->scc_id = 0x41045110; + mmc->psram_base = 0x21000000; + mmc->ethernet_base = 0x40200000; + mmc->has_block_ram = false; } static const TypeInfo mps2_info = { @@ -458,6 +496,12 @@ static const TypeInfo mps2_an386_info = { .class_init = mps2_an386_class_init, }; +static const TypeInfo mps2_an500_info = { + .name = TYPE_MPS2_AN500_MACHINE, + .parent = TYPE_MPS2_MACHINE, + .class_init = mps2_an500_class_init, +}; + static const TypeInfo mps2_an511_info = { .name = TYPE_MPS2_AN511_MACHINE, .parent = TYPE_MPS2_MACHINE, @@ -469,6 +513,7 @@ static void mps2_machine_init(void) type_register_static(&mps2_info); type_register_static(&mps2_an385_info); type_register_static(&mps2_an386_info); + type_register_static(&mps2_an500_info); type_register_static(&mps2_an511_info); } -- 2.20.1
