On Thu, Oct 15, 2020 at 06:21:09PM +0300, Maxim Uvarov wrote: > On Thu, 15 Oct 2020 at 17:12, Graeme Gregory <gra...@nuviainc.com> wrote: > > > > On Wed, Oct 14, 2020 at 01:04:43PM -0400, Shashi Mallela wrote: > > > This was added as a placeholder for the virt requirement suggested by > > > Maxim > > > earlier.Agreed that this fdt otherwise has no significance for sbsa-ref > > > platform nor is being used by ACPI table created for wdt. > > > > > > -Shashi > > > > > > On Wed, 14 Oct 2020 at 05:31, Graeme Gregory <[1]gra...@nuviainc.com> > > > wrote: > > > > > > On Tue, Oct 13, 2020 at 11:16:31AM -0400, Shashi Mallela wrote: > > > > Included the newly implemented SBSA generic watchdog device model > > > into > > > > SBSA platform > > > > > > > > Signed-off-by: Shashi Mallela <[2]shashi.mall...@linaro.org> > > > > --- > > > > hw/arm/sbsa-ref.c | 50 > > > +++++++++++++++++++++++++++++++++++++++++++++++ > > > > 1 file changed, 50 insertions(+) > > > > > > > > diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c > > > > index 9c3a893bedfd..97ed41607119 100644 > > > > --- a/hw/arm/sbsa-ref.c > > > > +++ b/hw/arm/sbsa-ref.c > > > > @@ -30,6 +30,7 @@ > > > > #include "exec/hwaddr.h" > > > > #include "kvm_arm.h" > > > > #include "hw/arm/boot.h" > > > > +#include "hw/arm/fdt.h" > > > > #include "hw/block/flash.h" > > > > #include "hw/boards.h" > > > > #include "hw/ide/internal.h" > > > > @@ -40,6 +41,7 @@ > > > > #include "hw/qdev-properties.h" > > > > #include "hw/usb.h" > > > > #include "hw/char/pl011.h" > > > > +#include "hw/watchdog/wdt_sbsa_gwdt.h" > > > > #include "net/net.h" > > > > #include "qom/object.h" > > > > > > > > @@ -64,6 +66,9 @@ enum { > > > > SBSA_GIC_DIST, > > > > SBSA_GIC_REDIST, > > > > SBSA_SECURE_EC, > > > > + SBSA_GWDT, > > > > + SBSA_GWDT_REFRESH, > > > > + SBSA_GWDT_CONTROL, > > > > SBSA_SMMU, > > > > SBSA_UART, > > > > SBSA_RTC, > > > > @@ -104,6 +109,8 @@ static const MemMapEntry sbsa_ref_memmap[] = { > > > > [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, > > > > [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, > > > > [SBSA_SECURE_EC] = { 0x50000000, 0x00001000 }, > > > > + [SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 }, > > > > + [SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 }, > > > > [SBSA_UART] = { 0x60000000, 0x00001000 }, > > > > [SBSA_RTC] = { 0x60010000, 0x00001000 }, > > > > [SBSA_GPIO] = { 0x60020000, 0x00001000 }, > > > > @@ -133,6 +140,8 @@ static const int sbsa_ref_irqmap[] = { > > > > [SBSA_SECURE_UART_MM] = 9, > > > > [SBSA_AHCI] = 10, > > > > [SBSA_EHCI] = 11, > > > > + [SBSA_SMMU] = 12, /* ... to 15 */ > > > > + [SBSA_GWDT] = 16, > > > > }; > > > > I guess your patch was not based on master here? You should make sure > > you are rebased to the latest version before sending. > > > > > > > > > > static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, > > > int idx) > > > > @@ -141,6 +150,30 @@ static uint64_t sbsa_ref_cpu_mp_affinity > > > (SBSAMachineState *sms, int idx) > > > > return arm_cpu_mp_affinity(idx, clustersz); > > > > } > > > > > > > > +static void create_wdt_fdt(SBSAMachineState *sms) > > > > +{ > > > > + char *nodename; > > > > + const char compat[] = "arm,sbsa-gwdt"; > > > > + > > > > + hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base; > > > > + hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base; > > > > + int irq = sbsa_ref_irqmap[SBSA_GWDT]; > > > > + > > > > + nodename = g_strdup_printf("/watchdog@%" PRIx64, rbase); > > > > + qemu_fdt_add_subnode(sms->fdt, nodename); > > > > + > > > > + qemu_fdt_setprop(sms->fdt, nodename, "compatible", > > > > + compat, sizeof(compat)); > > > > + qemu_fdt_setprop_sized_cells(sms->fdt, nodename, "reg", > > > > + 2, rbase, 2, SBSA_GWDT_RMMIO_SIZE, > > > > + 2, cbase, 2, > > > SBSA_GWDT_CMMIO_SIZE); > > > > + qemu_fdt_setprop_cells(sms->fdt, nodename, "interrupts", > > > > + GIC_FDT_IRQ_TYPE_PPI, irq, > > > > + GIC_FDT_IRQ_FLAGS_LEVEL_HI); > > > > + qemu_fdt_setprop_cell(sms->fdt, nodename, "timeout-sec", 30); > > > > + g_free(nodename); > > > > +} > > > > + > > > > > > Is this actually used anywhere? I ask because SBSA-ref is not a FDT > > > booting machine and only uses FDT to transfer some dynamic info to > > > arm-tf/edk2 and is not a full description tree. Your ACPI patch in > > > edk2 certainly does not use this info. > > > > > > > Greame, if sbsa-ref does not support non edk2 boot, i.e. > arm-tf/optee/uboot-uefi, then it's better to remove here and we can > add later for the virt machine. > It is not that it does not support it, it is as real hardware you will need to build the hardware knowledge into your firmware.
Graeme > > From your reply above I would propose this hunk and the call below are > > removed. If its needed to virt thats a seperate discussion which I think > > was already happening in another thread. > > > Yep, agree. > > Maxim. > > > FOSS style is for inline replies not top posting FYI > > > > Graeme > > > > > Graeme > > > > > > > > > > /* > > > > * Firmware on this machine only uses ACPI table to load OS, these > > > limited > > > > * device tree nodes are just to let firmware know the info which > > > varies > > > from > > > > @@ -219,6 +252,7 @@ static void create_fdt(SBSAMachineState *sms) > > > > > > > > g_free(nodename); > > > > } > > > > + create_wdt_fdt(sms); > > > > } > > > > > > > > #define SBSA_FLASH_SECTOR_SIZE (256 * KiB) > > > > @@ -447,6 +481,20 @@ static void create_rtc(const SBSAMachineState > > > *sms) > > > > sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, > > > irq)); > > > > } > > > > > > > > +static void create_wdt(const SBSAMachineState *sms) > > > > +{ > > > > + hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base; > > > > + hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base; > > > > + DeviceState *dev = qdev_new(TYPE_WDT_SBSA_GWDT); > > > > + SysBusDevice *s = SYS_BUS_DEVICE(dev); > > > > + int irq = sbsa_ref_irqmap[SBSA_GWDT]; > > > > + > > > > + sysbus_realize_and_unref(s, &error_fatal); > > > > + sysbus_mmio_map(s, 0, rbase); > > > > + sysbus_mmio_map(s, 1, cbase); > > > > + sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq)); > > > > +} > > > > + > > > > static DeviceState *gpio_key_dev; > > > > static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) > > > > { > > > > @@ -730,6 +778,8 @@ static void sbsa_ref_init(MachineState *machine) > > > > > > > > create_rtc(sms); > > > > > > > > + create_wdt(sms); > > > > + > > > > create_gpio(sms); > > > > > > > > create_ahci(sms); > > > > -- > > > > 2.18.4 > > > > > > > > > > > > > > > > > References: > > > > > > [1] mailto:gra...@nuviainc.com > > > [2] mailto:shashi.mall...@linaro.org > >