Yes this can be closed, no problems now using open bios to boot Solaris and it does support multiple processors though this is actually slower than one.
Sent from my mobile device On Nov 13, 2020, at 11:41 AM, Peter Maydell <1759...@bugs.launchpad.net> wrote: Reporter said in comment #1 that the bug can be closed, so let's close it :-) ** Changed in: qemu Status: Incomplete => Fix Released -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1759338<https://bugs.launchpad.net/bugs/1759338> Title: qemu-system-sparc w/ SS-20 ROM does not add processors Status in QEMU: Fix Released Bug description: When booting a SPARCstation-20 with the original ROM, qemu does not set the number of processors in a way that this ROM can understand it, and the ROM always reports only 1 processor installed: ~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20 -cpu "TI SuperSparc 60" -smp 2 -nographic Power-ON Reset SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95) CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache CPU_#1 ******* NOT installed ******* CPU_#2 ******* NOT installed ******* CPU_#3 ******* NOT installed ******* <<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID = 00000008) ... Cpu #0 TI,TMS390Z50 Cpu #1 Nothing there Cpu #2 Nothing there Cpu #3 Nothing there ... SPARCstation 20 (1 X 390Z50), No Keyboard ROM Rev. 2.25, 128 MB memory installed, Serial #1193046. Ethernet address 52:54:0:12:34:56, Host ID: 72123456. (It is necessary use SS-20 since it is the only sun4m model that supports 512MB RAM, and I can't get Solaris to install on the SS-20 using OpenBIOS.) When booting with OpenBIOS I can't seem to boot any version of Solaris though I had heard this did work. Solaris 8 and 9 do work nicely with this ROM, but I am opening this to see if it is possible to fix this to allow the original OBP ROM to see multiple processors. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions<https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions> -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1759338 Title: qemu-system-sparc w/ SS-20 ROM does not add processors Status in QEMU: Fix Released Bug description: When booting a SPARCstation-20 with the original ROM, qemu does not set the number of processors in a way that this ROM can understand it, and the ROM always reports only 1 processor installed: ~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20 -cpu "TI SuperSparc 60" -smp 2 -nographic Power-ON Reset SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95) CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache CPU_#1 ******* NOT installed ******* CPU_#2 ******* NOT installed ******* CPU_#3 ******* NOT installed ******* <<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID = 00000008) ... Cpu #0 TI,TMS390Z50 Cpu #1 Nothing there Cpu #2 Nothing there Cpu #3 Nothing there ... SPARCstation 20 (1 X 390Z50), No Keyboard ROM Rev. 2.25, 128 MB memory installed, Serial #1193046. Ethernet address 52:54:0:12:34:56, Host ID: 72123456. (It is necessary use SS-20 since it is the only sun4m model that supports 512MB RAM, and I can't get Solaris to install on the SS-20 using OpenBIOS.) When booting with OpenBIOS I can't seem to boot any version of Solaris though I had heard this did work. Solaris 8 and 9 do work nicely with this ROM, but I am opening this to see if it is possible to fix this to allow the original OBP ROM to see multiple processors. To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions