[Expired for QEMU because there has been no activity for 60 days.] ** Changed in: qemu Status: Incomplete => Expired
-- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1626207 Title: -device usb-host failing with usbip_vudc-vhdi_hcd gadget Status in QEMU: Expired Bug description: I must admit that I do not know if this is a Qemu or a Kernel issue, but I try reporting here: When I try to forward a copy of my USB mouse that I made with the new virtual USB device controller in kernel 4.7 I get the following in my log: [ +0.703256] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ +1.020776] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.855013] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.859052] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.857000] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.000141] usb 7-3: USB disconnect, device number 10 [ +0.153056] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ +0.703746] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.855001] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.855006] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.855005] usb usb7-port3: Cannot enable. Maybe the USB cable is bad? [ +0.000009] usb usb7-port3: unable to enumerate USB device the commands I use for makeing the virtual device are(after making a copy of the report description of my real mouse in /root/usb/kingston_report_desc): mkdir /sys/kernel/config/usb_gadget/winmouse cd /sys/kernel/config/usb_gadget/winmouse echo "0x047d" > idVendor echo "0x1020" > idProduct mkdir strings/0x409 echo 2016 > strings/0x409/serialnumber echo Kensington > strings/0x409/manufacturer echo "Kensington Expert Mouse" > strings/0x409/product mkdir configs/c.1 mkdir configs/c.1/strings/0x409 mkdir functions/hid.usb2 echo 2 > functions/hid.usb2/protocol echo 1 > functions/hid.usb2/subclass echo 4 > functions/hid.usb2/report_length cat /root/usb/kingston_report_desc > functions/hid.usb2/report_desc echo 0xa0 > configs/c.1/bmAttributes echo 100 > configs/c.1/MaxPower ln -s functions/hid.usb2 configs/c.1 echo usbip-vudc.2 > UDC usbip attach -r localhost -d usbip-vudc.2 The virtual mouse then shows up as Bus7,Dev10 and I use the option -device usb-host,hostbus=7,hostaddr=10,id=hostdev6,bus=usb.0,port=2 in Qemu to attach it. This is Qemu 2.7.0 on kernel 4.7.4 To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1626207/+subscriptions