On 1/31/21 12:50 PM, Philippe Mathieu-Daudé wrote:
> KVM requires the target cpu to be at least ARMv8 architecture
> (support on ARMv7 has been dropped in commit 82bf7ae84ce:
> "target/arm: Remove KVM support for 32-bit Arm hosts").
> 
> Beside, KVM only supports A-profile, thus won't be able to run
> M-profile cpus.
> 
> Only enable the following ARMv7 M-Profile CPUs when TCG is available:
> 
>   - Cortex-M0
>   - Cortex-M3
>   - Cortex-M4
>   - Cortex-M33
> 
> The following machines are no more built when TCG is disabled:
> 
>   - emcraft-sf2          SmartFusion2 SOM kit from Emcraft (M2S010)
>   - highbank             Calxeda Highbank (ECX-1000)
>   - lm3s6965evb          Stellaris LM3S6965EVB (Cortex-M3)
>   - lm3s811evb           Stellaris LM3S811EVB (Cortex-M3)
>   - midway               Calxeda Midway (ECX-2000)
>   - mps2-an385           ARM MPS2 with AN385 FPGA image for Cortex-M3
>   - mps2-an386           ARM MPS2 with AN386 FPGA image for Cortex-M4
>   - mps2-an500           ARM MPS2 with AN500 FPGA image for Cortex-M7
>   - mps2-an505           ARM MPS2 with AN505 FPGA image for Cortex-M33
>   - mps2-an511           ARM MPS2 with AN511 DesignStart FPGA image for 
> Cortex-M3
>   - mps2-an521           ARM MPS2 with AN521 FPGA image for dual Cortex-M33
>   - musca-a              ARM Musca-A board (dual Cortex-M33)
>   - musca-b1             ARM Musca-B1 board (dual Cortex-M33)
>   - netduino2            Netduino 2 Machine (Cortex-M3)
>   - netduinoplus2        Netduino Plus 2 Machine(Cortex-M4)
> 
> We don't need to enforce CONFIG_ARM_V7M in default-configs anymore.
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org>
> ---
>  default-configs/devices/arm-softmmu.mak | 11 -----------
>  hw/arm/Kconfig                          |  7 +++++++
>  target/arm/Kconfig                      |  1 +
>  3 files changed, 8 insertions(+), 11 deletions(-)
> 
> diff --git a/default-configs/devices/arm-softmmu.mak 
> b/default-configs/devices/arm-softmmu.mak
> index 175530595ce..0fc80d7d6df 100644
> --- a/default-configs/devices/arm-softmmu.mak
> +++ b/default-configs/devices/arm-softmmu.mak
> @@ -1,28 +1,17 @@
>  # Default configuration for arm-softmmu
>  
> -# TODO: ARM_V7M is currently always required - make this more flexible!
> -CONFIG_ARM_V7M=y
> -
>  # CONFIG_PCI_DEVICES=n
>  # CONFIG_TEST_DEVICES=n
>  
>  CONFIG_ARM_VIRT=y
>  CONFIG_CUBIEBOARD=y
>  CONFIG_EXYNOS4=y
> -CONFIG_HIGHBANK=y
> -CONFIG_MUSCA=y
> -CONFIG_STELLARIS=y
>  CONFIG_REALVIEW=y
>  CONFIG_VEXPRESS=y
>  CONFIG_ZYNQ=y
>  CONFIG_NPCM7XX=y
> -CONFIG_NETDUINO2=y
> -CONFIG_NETDUINOPLUS2=y
> -CONFIG_MPS2=y
>  CONFIG_RASPI=y
>  CONFIG_SABRELITE=y
> -CONFIG_EMCRAFT_SF2=y
> -CONFIG_MICROBIT=y
>  CONFIG_FSL_IMX7=y
>  CONFIG_FSL_IMX6UL=y
>  CONFIG_ALLWINNER_H3=y
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 4baf1f97694..62f8b0d24e7 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -60,6 +60,7 @@ config EXYNOS4
>  
>  config HIGHBANK
>      bool
> +    default y if TCG && ARM
>      select A9MPCORE
>      select A15MPCORE
>      select AHCI
> @@ -95,6 +96,7 @@ config MAINSTONE
>  
>  config MUSCA
>      bool
> +    default y if TCG && ARM
>      select ARMSSE
>      select PL011
>      select PL031
> @@ -115,10 +117,12 @@ config MUSICPAL
>  
>  config NETDUINO2
>      bool
> +    default y if TCG && ARM
>      select STM32F205_SOC
>  
>  config NETDUINOPLUS2
>      bool
> +    default y if TCG && ARM
>      select STM32F405_SOC
>  
>  config NSERIES
> @@ -240,6 +244,7 @@ config SABRELITE
>  
>  config STELLARIS
>      bool
> +    default y if TCG && ARM
>      select ARM_V7M
>      select CMSDK_APB_WATCHDOG
>      select I2C
> @@ -443,6 +448,7 @@ config ASPEED_SOC
>  
>  config MPS2
>      bool
> +    default y if TCG && ARM
>      select ARMSSE
>      select LAN9118
>      select MPS2_FPGAIO
> @@ -496,6 +502,7 @@ config NRF51_SOC
>  
>  config EMCRAFT_SF2
>      bool
> +    default y if TCG && ARM
>      select MSF2
>      select SSI_M25P80
>  
> diff --git a/target/arm/Kconfig b/target/arm/Kconfig
> index 4dc96c46520..07a2fad7a2b 100644
> --- a/target/arm/Kconfig
> +++ b/target/arm/Kconfig
> @@ -24,4 +24,5 @@ config ARM_V7R
>  
>  config ARM_V7M
>      bool
> +    depends on TCG && ARM
>      select PTIMER
> 

Acked-by: Claudio Fontana <cfont...@suse.de>

Reply via email to