> On Sep 2, 2021, at 1:12 AM, Cédric Le Goater <c...@kaod.org> wrote: > > Hello, > > On 9/2/21 12:59 AM, p...@fb.com wrote: >> From: Peter Delevoryas <p...@fb.com> >> >> Adding a new Aspeed AST2600 machine type, uses MAC3 for ethernet1 and >> UART1 for the serial console, which is different than the existing >> ast2600-evb. Otherwise though, my usage so far hasn't required a >> different set of hardware strap registers or anything, so I just >> inherited the rest of the configuration from the ast2600-evb. If >> preferred, I can eliminate the inheritance and just declare Fuji >> completely independently. >> >> I included more info in the commit message, but just for convenience, >> here's the DTS link and a link to an image I'm providing for the >> acceptance test. >> >> https://github.com/facebook/openbmc-uboot/blob/openbmc/helium/v2019.04/arch/arm/dts/aspeed-bmc-facebook-fuji.dts >> https://github.com/peterdelevoryas/openbmc/releases/download/fuji-v0.1-alpha/fuji.mtd > > Are we sure the flash models fit what the machine expects ?
Oh, I see, I’m not exactly sure which device is being used but it should be one using the m25p80 command set, and after switching to one of those devices (e.g. mx66l1g45g) it works: [ 54.867027] Creating 6 MTD partitions on "spi0.0": [ 54.867506] 0x000000000000-0x0000000e0000 : "u-boot" [ 54.873929] 0x0000000e0000-0x0000000f0000 : "env" [ 54.876546] 0x0000000f0000-0x000000100000 : "meta" [ 54.878948] 0x000000100000-0x000007800000 : "fit" [ 54.881290] 0x000007800000-0x000008000000 : "data0" [ 54.883965] 0x000000000000-0x000008000000 : "flash0" > > [ 41.314338] 6 fixed-partitions partitions found on MTD device spi0.0 > [ 41.314600] Creating 6 MTD partitions on "spi0.0": > [ 41.314957] 0x000000000000-0x0000000e0000 : "u-boot" > [ 41.318355] 0x0000000e0000-0x0000000f0000 : "env" > [ 41.319747] 0x0000000f0000-0x000000100000 : "meta" > [ 41.321064] 0x000000100000-0x000007800000 : "fit" > [ 41.321247] mtd: partition "fit" extends beyond the end of device > "spi0.0" -- size truncated to 0x3f00000 > [ 41.322684] 0x000007800000-0x000008000000 : "data0" > [ 41.322827] mtd: partition "data0" is out of reach -- disabled > [ 41.324110] 0x000000000000-0x000008000000 : "flash0" > [ 41.324253] mtd: partition "flash0" extends beyond the end of device > "spi0.0" -- size truncated to 0x4000000 > > More info in the log below. > > > Could we also define the list of expected I2C devices of the machine ? Yeah sure! I’ll follow up with that. > > [ 42.336648] pca954x 2-0070: probe failed > [ 42.337169] pca954x 8-0070: probe failed > [ 42.337526] pca954x 11-0077: probe failed > ... > 3-0048 (lm75) - no driver bound > unable to find driver for 3-0048 > 3-0049 (lm75) - no driver bound > unable to find driver for 3-0049 > 3-004a (lm75) - no driver bound > unable to find driver for 3-004a > 3-004c (tmp422) - no driver bound > Failed to open /sys/bus/i2c/devices/50-0052/eeprom: No such file or directory > Failed to parse default EEPROM > > QEMU has support for these devices > > Otherwise, it looks good. I have added an emmc drive and it is detected. > > Mounting /dev/mmcblk0 to /mnt/data1.. > [ 65.611717] EXT4-fs (mmcblk0): mounted filesystem with ordered data mode. > Opts: (null) > /dev/mmcblk0 mounted successfully, device usage: > Filesystem Size Used Available Use% Mounted on > /dev/mmcblk0 15.7G 44.0M 14.8G 0% /mnt/data1 > > > Here are some errors that would need investigation. I’ll follow up on these too. > > Is the Fuji using the Aspeed RTC ? > > hwclock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Invalid > argument > > That's a weird MMIO range for the ADC ? > > [ 42.856022] aspeed_adc: probe of 1e6e9100.adc failed with error -110 > > And that's unexected : > > Error: unable to disable the 2nd watchdog: FMC_WDT2=0xFFFFFFFF > > >> >> I'm not sure exactly what the requirements are on the image url >> provided, or the requirements of the image itself. >> >> The existing OpenBMC acceptance tests mostly use images from the Linux >> Foundation repository's releases, e.g. >> >> https://github.com/openbmc/openbmc/releases/download/2.9.0/obmc-phosphor-image-romulus.static.mtd >> >> Although, I do see one image from a regular user's repo: >> >> https://github.com/hskinnemoen/openbmc/releases/download/20200711-gsj-qemu-0/obmc-phosphor-image-gsj.static.mtd.gz >> >> So maybe it's not that unreasonable? I also might be able to organize a >> release link on the official Facebook OpenBMC Github. > > ok. That can come later but please split the patch in two : machine and > acceptance test and copy the maintainers on the second. Just add : > > Cc: Cleber Rosa <cr...@redhat.com> > Cc: Willian Rampazzo <willi...@redhat.com> > Got it, ok yeah I’ll submit the machine by itself, and submit the acceptance test separately and cc Cleber and Willian. > >> As far as the actual requirements of the acceptance test, I didn't use >> the existing "do_test_arm_aspeed" because Fuji was sufficiently >> different (different U-Boot version, kernel address, CPU, SPI control >> register, doesn't use systemd), but I could try unifying them if there's >> interest or suggestions on how to do so. >> >> By the way, Fuji takes a long time to boot on my Macbook: >> >> (19/38) >> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_ast2600_fuji_openbmc: >> PASS (85.13 s) > > Yes. It also does on my laptop and QEMU is hogging my CPU. I don't know > why. May be the CPU are not correctly brought up. no cpuidle in the > kernel ? I don't know much on this topic. > > Output is below. > > Thanks, > > C. > Yeah, I can at least find out if this is expected right now or not. Thanks, Peter > >> >> The next longest boot time is <20 seconds: >> >> 17/38) >> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_ast2500_romulus_openbmc_v2_9_0: >> PASS (17.46 s) >> >> Not sure if that's a problem for the CIT infra time or not. >> >> Thanks, >> Peter >> >> Peter Delevoryas (1): >> hw/arm/aspeed: Add Fuji machine type >> >> hw/arm/aspeed.c | 14 ++++++++++++++ >> tests/acceptance/boot_linux_console.py | 25 +++++++++++++++++++++++++ >> 2 files changed, 39 insertions(+) >> > > > > > > U-Boot 2019.04 fuji-b9c651226b (Aug 25 2021 - 17:27:02 +0000) > > SOC: AST2600-A3 > eSPI Mode: SIO:Enable : SuperIO-2e > Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII > Model: Aspeed BMC > DRAM: 896 MiB (capacity:1024 MiB, VGA:64 MiB, ECC:on, ECC size:896 MiB) > MMC: emmc_slot0@100: 0 > Loading Environment from SPI Flash... SF: Detected w25q512jv with page size > 256 Bytes, erase size 4 KiB, total 64 MiB > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Model: Aspeed BMC > Net: > Warning: ftgmac@1e690000 (eth1) using random MAC address - 66:32:35:58:26:53 > eth1: ftgmac@1e690000 > autoboot in 2 seconds (stop with 'Delete' key)... > ## Loading kernel from FIT Image at 20100000 ... > Using 'conf@1' configuration > Trying 'kernel@1' kernel subimage > Description: Linux kernel > Type: Kernel Image > Compression: uncompressed > Data Start: 0x201000e0 > Data Size: 3658752 Bytes = 3.5 MiB > Architecture: ARM > OS: Linux > Load Address: 0x80008000 > Entry Point: 0x80008000 > Hash algo: sha256 > Hash value: > 966d2c13359bc53400606850e418559791cf7d35106f4801bf98138cd6f6b5b8 > Verifying Hash Integrity ... sha256+ OK > ## Loading ramdisk from FIT Image at 20100000 ... > Using 'conf@1' configuration > Trying 'ramdisk@1' ramdisk subimage > Description: RAMDISK > Type: RAMDisk Image > Compression: lzma compressed > Data Start: 0x2047d5d0 > Data Size: 21939893 Bytes = 20.9 MiB > Architecture: ARM > OS: Linux > Load Address: unavailable > Entry Point: unavailable > Hash algo: sha256 > Hash value: > d51f4729786df5c7c2f75eea1f0dddf3a4fffe79c6bf39fc535bf901284aff4c > Verifying Hash Integrity ... sha256+ OK > ## Loading fdt from FIT Image at 20100000 ... > Using 'conf@1' configuration > Trying 'fdt@1' fdt subimage > Description: Flattened Device Tree blob > Type: Flat Device Tree > Compression: uncompressed > Data Start: 0x21969d68 > Data Size: 58335 Bytes = 57 KiB > Architecture: ARM > Hash algo: sha256 > Hash value: > 2e5a1f658d5930bb0ffa31dd214d11934739504ad4553b1a057ce544ac1618c9 > Verifying Hash Integrity ... sha256+ OK > Booting using the fdt blob at 0x21969d68 > Loading Kernel Image ... OK > Loading Ramdisk to 8eb13000, end 8ffff6b5 ... OK > Loading Device Tree to 8eb01000, end 8eb123de ... OK > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0xf00 > [ 0.000000] Linux version 5.10.23-fuji (oe-user@oe-host) > (arm-fb-linux-gnueabi-gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.34.0.20200220) > #1 SMP Wed Aug 25 09:15:46 UTC 2021 > [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d > [ 0.000000] CPU: div instructions available: patching division code > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] OF: fdt: Machine model: Facebook Fuji BMC > [ 0.000000] Memory policy: Data cache writealloc > [ 0.000000] cma: Reserved 16 MiB at 0xb7000000 > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x0000000080000000-0x00000000b7ffffff] > [ 0.000000] HighMem empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000b7ffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000080000000-0x00000000b7ffffff] > [ 0.000000] percpu: Embedded 20 pages/cpu s50380 r8192 d23348 u81920 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227584 > [ 0.000000] Kernel command line: console=ttyS0,9600n8 root=/dev/ram rw > vmalloc=640M > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes, linear) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, > linear) > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > [ 0.000000] Memory: 859132K/917504K available (8192K kernel code, 711K > rwdata, 2036K rodata, 1024K init, 182K bss, 41988K reserved, 16384K > cma-reserved, 0K highmem) > [ 0.000000] random: get_random_u32 called from > cache_alloc_refill+0x3d4/0x8e4 with crng_init=0 > [ 0.000000] ftrace: allocating 27560 entries in 54 pages > [ 0.000000] ftrace: allocated 54 pages with 4 groups > [ 0.000000] rcu: Hierarchical RCU implementation. > [ 0.000000] rcu: RCU event tracing is enabled. > [ 0.000000] Rude variant of Tasks RCU enabled. > [ 0.000000] Tracing variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 > jiffies. > [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 > [ 0.000000] arch_timer: cp15 timer(s) running at 1200.00MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff > max_cycles: 0x114c1bbbeec, max_idle_ns: 440795229572 ns > [ 0.000182] sched_clock: 56 bits at 1200MHz, resolution 0ns, wraps every > 2199023255551ns > [ 0.000368] Switching to timer-based delay loop, resolution 0ns > [ 0.008298] Console: colour dummy device 80x30 > [ 0.013127] Calibrating delay loop (skipped), value calculated using timer > frequency.. 2400.00 BogoMIPS (lpj=12000000) > [ 0.013387] pid_max: default: 32768 minimum: 301 > [ 0.014989] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, > linear) > [ 0.015047] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 > bytes, linear) > [ 0.028837] CPU: Testing write buffer coherency: ok > [ 0.039491] /cpus/cpu@f00 missing clock-frequency property > [ 0.039603] /cpus/cpu@f01 missing clock-frequency property > [ 0.039801] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 > [ 0.047978] Setting up static identity map for 0x80100000 - 0x80100078 > [ 0.048860] rcu: Hierarchical SRCU implementation. > [ 0.054656] smp: Bringing up secondary CPUs ... > [ 0.057899] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 > [ 0.061573] smp: Brought up 1 node, 2 CPUs > [ 0.061688] SMP: Total of 2 processors activated (4800.00 BogoMIPS). > [ 0.061759] CPU: All CPU(s) started in SVC mode. > [ 0.074798] devtmpfs: initialized > [ 0.102350] VFP support v0.3: implementor 41 architecture 2 part 30 > variant 7 rev 5 > [ 0.120576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 19112604462750000 ns > [ 0.121493] futex hash table entries: 512 (order: 3, 32768 bytes, linear) > [ 0.125917] pinctrl core: initialized pinctrl subsystem > [ 0.135857] NET: Registered protocol family 16 > [ 0.159246] DMA: preallocated 256 KiB pool for atomic coherent allocations > [ 0.164901] No ATAGs? > [ 0.165653] hw-breakpoint: CPU 0 debug is powered down! > [ 0.283699] SCSI subsystem initialized > [ 0.284914] usbcore: registered new interface driver usbfs > [ 0.285188] usbcore: registered new interface driver hub > [ 0.285355] usbcore: registered new device driver usb > [ 0.285735] mc: Linux media interface: v0.10 > [ 0.285845] videodev: Linux video capture interface: v2.00 > [ 0.286081] EDAC MC: Ver: 3.0.0 > [ 0.305952] clocksource: Switched to clocksource arch_sys_counter > [ 0.382130] NET: Registered protocol family 2 > [ 0.387793] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, > 6144 bytes, linear) > [ 0.387897] TCP established hash table entries: 8192 (order: 3, 32768 > bytes, linear) > [ 0.388103] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, > linear) > [ 0.388279] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.389221] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > [ 0.389434] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, > linear) > [ 0.390884] NET: Registered protocol family 1 > [ 0.395625] Unpacking initramfs... > [ 41.082531] Freeing initrd memory: 21428K > [ 41.086695] workingset: timestamp_bits=30 max_order=18 bucket_order=0 > [ 41.088151] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 41.088211] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. > [ 41.089642] NET: Registered protocol family 38 > [ 41.089919] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 247) > [ 41.090043] io scheduler mq-deadline registered > [ 41.090130] io scheduler kyber registered > [ 41.169551] Serial: 8250/16550 driver, 17 ports, IRQ sharing enabled > [ 41.183421] printk: console [ttyS0] disabled > [ 41.185093] 1e783000.serial: ttyS0 at MMIO 0x1e783000 (irq = 40, base_baud > = 1500000) is a 16550A > [ 41.202343] printk: console [ttyS0] enabled > [ 41.204600] 1e784000.serial: ttyS4 at MMIO 0x1e784000 (irq = 41, base_baud > = 1500000) is a 16550A > [ 41.206867] 1e78d000.serial: ttyS1 at MMIO 0x1e78d000 (irq = 42, base_baud > = 1500000) is a 16550A > [ 41.222532] loop: module loaded > [ 41.244723] aspeed-smc 1e620000.spi: Using bus width 2 and 50 MHz SPI > frequency > [ 41.248653] aspeed-smc 1e620000.spi: w25q512jv (65536 Kbytes) > [ 41.249022] aspeed-smc 1e620000.spi: CE0 window [ 0x20000000 - 0x24000000 > ] 64MB > [ 41.249518] aspeed-smc 1e620000.spi: CE1 window [ 0x24000000 - 0x2c000000 > ] 128MB > [ 41.249789] aspeed-smc 1e620000.spi: read control register: 203c0041 > [ 41.314338] 6 fixed-partitions partitions found on MTD device spi0.0 > [ 41.314600] Creating 6 MTD partitions on "spi0.0": > [ 41.314957] 0x000000000000-0x0000000e0000 : "u-boot" > [ 41.318355] 0x0000000e0000-0x0000000f0000 : "env" > [ 41.319747] 0x0000000f0000-0x000000100000 : "meta" > [ 41.321064] 0x000000100000-0x000007800000 : "fit" > [ 41.321247] mtd: partition "fit" extends beyond the end of device "spi0.0" > -- size truncated to 0x3f00000 > [ 41.322684] 0x000007800000-0x000008000000 : "data0" > [ 41.322827] mtd: partition "data0" is out of reach -- disabled > [ 41.324110] 0x000000000000-0x000008000000 : "flash0" > [ 41.324253] mtd: partition "flash0" extends beyond the end of device > "spi0.0" -- size truncated to 0x4000000 > [ 41.326150] aspeed-smc 1e620000.spi: Using bus width 2 and 50 MHz SPI > frequency > [ 41.326513] aspeed-smc 1e620000.spi: unrecognized JEDEC id bytes: 00 00 00 > 00 00 00 > [ 41.326870] Deleting MTD partitions on "spi0.0": > [ 41.327042] Deleting u-boot MTD partition > [ 41.422421] Deleting env MTD partition > [ 41.509609] Deleting meta MTD partition > [ 41.599398] Deleting fit MTD partition > [ 41.686499] Deleting data0 MTD partition > [ 41.776120] Deleting flash0 MTD partition > [ 41.871368] aspeed-smc 1e620000.spi: Aspeed SMC probe failed -2 > [ 42.101595] aspeed-smc: probe of 1e620000.spi failed with error -2 > [ 42.102599] aspeed-smc 1e630000.spi: Using bus width 1 and 5 MHz SPI > frequency > [ 42.103010] aspeed-smc 1e630000.spi: mx25u51245g (65536 Kbytes) > [ 42.103180] aspeed-smc 1e630000.spi: CE0 window resized to 32MB > [ 42.103600] aspeed-smc 1e630000.spi: CE0 window [ 0x30000000 - 0x32000000 > ] 32MB > [ 42.103826] aspeed-smc 1e630000.spi: CE1 window [ 0x32000000 - 0x32000000 > ] 0MB (disabled) > [ 42.104031] aspeed-smc 1e630000.spi: CE0 window too small for chip 64MB > [ 42.104207] aspeed-smc 1e630000.spi: read control register: 000c0045 > [ 42.106541] aspeed-smc 1e630000.spi: No good frequency, using dumb slow > [ 42.106767] 1 fixed-partitions partitions found on MTD device spi1.0 > [ 42.106908] Creating 1 MTD partitions on "spi1.0": > [ 42.107031] 0x000000000000-0x000002000000 : "spi-flash" > [ 42.116997] 93xx46 spi2.2: 16-bit eeprom > [ 42.119923] libphy: Fixed MDIO Bus: probed > [ 42.121446] libphy: mdio-aspeed: probed > [ 42.222494] ftgmac100 1e690000.ftgmac: Read MAC address 66:32:35:58:26:53 > from chip > [ 42.224028] RTL8211E Gigabit Ethernet 1e650008.mdio-1:0d: attached PHY > driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=1e650008.mdio-1:0d, > irq=POLL) > [ 42.226442] ftgmac100 1e690000.ftgmac eth0: irq 32, mapped at (ptrval) > [ 42.227043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 42.227243] ehci-platform: EHCI generic platform driver > [ 42.238980] ehci-platform 1e6a3000.usb: EHCI Host Controller > [ 42.239525] ehci-platform 1e6a3000.usb: new USB bus registered, assigned > bus number 1 > [ 42.242802] ehci-platform 1e6a3000.usb: irq 33, io mem 0x1e6a3000 > [ 42.266828] ehci-platform 1e6a3000.usb: USB 2.0 started, EHCI 1.00 > [ 42.286145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, > bcdDevice= 5.10 > [ 42.286649] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 42.287097] usb usb1: Product: EHCI Host Controller > [ 42.287397] usb usb1: Manufacturer: Linux 5.10.23-fuji ehci_hcd > [ 42.287769] usb usb1: SerialNumber: 1e6a3000.usb > [ 42.294596] hub 1-0:1.0: USB hub found > [ 42.295784] hub 1-0:1.0: 6 ports detected > [ 42.303867] aspeed-rtc 1e781000.rtc: registered as rtc0 > [ 42.304079] aspeed-rtc 1e781000.rtc: hctosys: unable to read the hardware > clock > [ 42.304905] i2c /dev entries driver > [ 42.308232] aspeed-i2c-bus 1e78a080.i2c-bus: i2c bus 0 registered, irq 43 > [ 42.309791] aspeed-i2c-bus 1e78a100.i2c-bus: i2c bus 1 registered, irq 44 > [ 42.312424] aspeed-i2c-bus 1e78a180.i2c-bus: i2c bus 2 registered, irq 45 > [ 42.313869] aspeed-i2c-bus 1e78a200.i2c-bus: i2c bus 3 registered, irq 46 > [ 42.315551] aspeed-i2c-bus 1e78a280.i2c-bus: i2c bus 4 registered, irq 47 > [ 42.317003] aspeed-i2c-bus 1e78a300.i2c-bus: i2c bus 5 registered, irq 48 > [ 42.318378] aspeed-i2c-bus 1e78a380.i2c-bus: i2c bus 6 registered, irq 49 > [ 42.319791] aspeed-i2c-bus 1e78a400.i2c-bus: i2c bus 7 registered, irq 50 > [ 42.322515] aspeed-i2c-bus 1e78a480.i2c-bus: i2c bus 8 registered, irq 51 > [ 42.323873] aspeed-i2c-bus 1e78a500.i2c-bus: i2c bus 9 registered, irq 52 > [ 42.325427] aspeed-i2c-bus 1e78a580.i2c-bus: i2c bus 10 registered, irq 53 > [ 42.328548] aspeed-i2c-bus 1e78a600.i2c-bus: i2c bus 11 registered, irq 54 > [ 42.330116] aspeed-i2c-bus 1e78a680.i2c-bus: i2c bus 12 registered, irq 55 > [ 42.332137] aspeed-i2c-bus 1e78a700.i2c-bus: i2c bus 13 registered, irq 56 > [ 42.333751] aspeed-i2c-bus 1e78a800.i2c-bus: i2c bus 15 registered, irq 57 > [ 42.336648] pca954x 2-0070: probe failed > [ 42.337169] pca954x 8-0070: probe failed > [ 42.337526] pca954x 11-0077: probe failed > [ 42.338165] Driver for 1-wire Dallas network protocol. > [ 42.342045] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: > dm-de...@redhat.com > [ 42.343645] sdhci: Secure Digital Host Controller Interface driver > [ 42.343827] sdhci: Copyright(c) Pierre Ossman > [ 42.343945] sdhci-pltfm: SDHCI platform and OF driver helper > [ 42.346611] usbcore: registered new interface driver usbhid > [ 42.346784] usbhid: USB HID core driver > [ 42.348478] aspeed_adc 1e6e9000.adc: trim 8 > [ 42.348960] sdhci-aspeed 1e750100.sdhci: Configured for slot 0 > [ 42.349652] aspeed_adc 1e6e9000.adc: cv 512 > [ 42.379121] mmc0: SDHCI controller on 1e750100.sdhci [1e750100.sdhci] > using ADMA > [ 42.430954] mmc0: new high speed MMC card at address 0001 > [ 42.433626] mmcblk0: mmc0:0001 QEMU! 16.0 GiB > [ 42.434239] mmcblk0boot0: mmc0:0001 QEMU! partition 1 1.00 MiB > [ 42.434735] mmcblk0boot1: mmc0:0001 QEMU! partition 2 1.00 MiB > [ 42.435553] mmcblk0rpmb: mmc0:0001 QEMU! partition 3 128 KiB, chardev > (246:0) > [ 42.460224] GPT:Primary header thinks Alt. header is not at the end of the > disk. > [ 42.460505] GPT:29624393 != 33550335 > [ 42.460635] GPT:Alternate GPT header not at the end of the disk. > [ 42.460800] GPT:29624393 != 33550335 > [ 42.460901] GPT: Use GNU Parted to correct GPT errors. > [ 42.461746] mmcblk0: p1 p2 p3 p4 p5 p6 p7 > [ 42.856022] aspeed_adc: probe of 1e6e9100.adc failed with error -110 > [ 42.869730] NET: Registered protocol family 10 > [ 42.881157] Segment Routing with IPv6 > [ 42.881766] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [ 42.884824] NET: Registered protocol family 17 > [ 42.885419] 8021q: 802.1Q VLAN Support v1.8 > [ 42.886106] Registering SWP/SWPB emulation handler > [ 42.893191] printk: console [netcon0] enabled > [ 42.893415] netconsole: network logging started > [ 42.924329] Freeing unused kernel memory: 1024K > [ 42.955558] Checked W+X mappings: passed, no W+X pages found > [ 42.955940] Run /init as init process > INIT: version 2.96 booting > Starting udev > [ 44.366969] udevd[83]: starting version 3.2.9 > [ 44.377459] random: udevd: uninitialized urandom read (16 bytes read) > [ 44.382885] random: udevd: uninitialized urandom read (16 bytes read) > [ 44.384584] random: udevd: uninitialized urandom read (16 bytes read) > [ 44.443411] udevd[84]: starting eudev-3.2.9 > [ 45.164092] timeriomem_rng 1e6e2524.hwrng: 32bits from 0x(ptrval) @ 1us > [ 45.351882] random: fast init done > [ 45.644240] random: crng init done > [ 45.646545] random: 1 urandom warning(s) missed due to ratelimiting > [ 46.304972] aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 > mode > [ 49.607914] i2c_dev_sysfs: loading out-of-tree module taints kernel. > No data0/dataro partition found. /mnt/data not mounted. > Cannot open /dev/mtd1: No such file or directory > No filesystem found on /dev/mmcblk0 try: 1. > [ 57.552408] GPT:Primary header thinks Alt. header is not at the end of the > disk. > [ 57.554458] GPT:29624393 != 33550335 > [ 57.554625] GPT:Alternate GPT header not at the end of the disk. > [ 57.554806] GPT:29624393 != 33550335 > [ 57.554935] GPT: Use GNU Parted to correct GPT errors. > [ 57.555981] mmcblk0: p1 p2 p3 p4 p5 p6 p7 > No filesystem found on /dev/mmcblk0 try: 2. > [ 57.741084] GPT:Primary header thinks Alt. header is not at the end of the > disk. > [ 57.741498] GPT:29624393 != 33550335 > [ 57.741646] GPT:Alternate GPT header not at the end of the disk. > [ 57.741899] GPT:29624393 != 33550335 > [ 57.742054] GPT: Use GNU Parted to correct GPT errors. > [ 57.742392] mmcblk0: p1 p2 p3 p4 p5 p6 p7 > No filesystem found on /dev/mmcblk0 try: 3. > No filesystem found on /dev/mmcblk0 after 3 times try. Creating ext4 > filesystem.. > [ 57.907546] GPT:Primary header thinks Alt. header is not at the end of the > disk. > [ 57.907831] GPT:29624393 != 33550335 > [ 57.907981] GPT:Alternate GPT header not at the end of the disk. > [ 57.908245] GPT:29624393 != 33550335 > [ 57.908404] GPT: Use GNU Parted to correct GPT errors. > [ 57.908700] mmcblk0: p1 p2 p3 p4 p5 p6 p7 > [ 58.006800] mmc_erase: group start error -110, status 0x0 > [ 58.047138] mmc_erase: group start error -110, status 0x0 > [ 58.047610] blk_update_request: I/O error, dev mmcblk0, sector 0 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.048590] mmc_erase: group start error -110, status 0x0 > [ 58.048888] blk_update_request: I/O error, dev mmcblk0, sector 4096 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.049715] mmc_erase: group start error -110, status 0x0 > [ 58.049959] blk_update_request: I/O error, dev mmcblk0, sector 8192 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.050692] mmc_erase: group start error -110, status 0x0 > [ 58.050889] blk_update_request: I/O error, dev mmcblk0, sector 12288 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.051522] mmc_erase: group start error -110, status 0x0 > [ 58.051720] blk_update_request: I/O error, dev mmcblk0, sector 16384 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.052321] mmc_erase: group start error -110, status 0x0 > [ 58.052494] blk_update_request: I/O error, dev mmcblk0, sector 20480 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.053187] mmc_erase: group start error -110, status 0x0 > [ 58.053383] blk_update_request: I/O error, dev mmcblk0, sector 24576 op > 0x3:(DISCARD) flags 0x4800 phys_seg 1 prio class 0 > [ 58.053999] mmc_erase: group start error -110, status 0x0 > [ 58.054193] blk_update_request: I/O error, dev mmcblk0, sector 28672 op > 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 0 > Mounting /dev/mmcblk0 to /mnt/data1.. > [ 65.611717] EXT4-fs (mmcblk0): mounted filesystem with ordered data mode. > Opts: (null) > /dev/mmcblk0 mounted successfully, device usage: > Filesystem Size Used Available Use% Mounted on > /dev/mmcblk0 15.7G 44.0M 14.8G 0% /mnt/data1 > hwclock: ioctl(RTC_RD_TIME) to /dev/rtc0 to read the time failed: Invalid > argument > Fri Mar 9 12:34:56 UTC 2018 > Error: Could not open file `/dev/i2c-55' or `/dev/i2c/55': No such file or > directory > Error: Could not open file `/dev/i2c-63' or `/dev/i2c/63': No such file or > directory > Error: Read failed > [ 70.851421] i2c i2c-0: new_device: Instantiated device slave-mqueue at 0x10 > [ 70.857562] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > [ 70.860010] i2c i2c-1: new_device: Instantiated device mp2978 at 0x53 > [ 70.862020] i2c i2c-1: new_device: Instantiated device mp2978 at 0x59 > [ 70.869643] i2c i2c-2: new_device: Instantiated device scmcpld at 0x35 > [ 70.877706] i2c i2c-4: new_device: Instantiated device slave-mqueue at 0x10 > [ 70.880601] i2c i2c-4: new_device: Instantiated device smb_debugcardcpld > at 0x27 > [ 70.884359] i2c i2c-13: new_device: Instantiated device iobfpga at 0x35 > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-17/new_device: > No such file or directory > [ 70.901495] xdpe132g5c 1-0040: PMBus status register not found > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-17/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-19/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-20/new_device: > No such file or directory > [ 71.061245] i2c i2c-3: new_device: Instantiated device lm75 at 0x48 > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-22/new_device: > No such file or directory > [ 71.707488] i2c i2c-3: new_device: Instantiated device lm75 at 0x49 > [ 71.762221] i2c i2c-3: new_device: Instantiated device lm75 at 0x4a > [ 71.776395] tmp421 3-004c: Could not read configuration register (-6) > [ 71.776815] i2c i2c-3: new_device: Instantiated device tmp422 at 0x4c > [ 71.785568] ucd9000 5-0035: Failed to read device ID > [ 71.785959] i2c i2c-5: new_device: Instantiated device ucd90160 at 0x35 > [ 71.795967] ucd9000 5-0036: Failed to read device ID > [ 71.798393] i2c i2c-5: new_device: Instantiated device ucd90160 at 0x36 > [ 71.897336] i2c i2c-8: new_device: Instantiated device 24c64 at 0x51 > [ 72.007781] i2c i2c-8: new_device: Instantiated device lm75 at 0x4a > /etc/rcS.d/S59setup_i2c.sh: line 73: [: : integer expression expected > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-48/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-49/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-50/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-50/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-51/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-52/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-54/new_device: > No such file or directory > Error: Could not open file `/dev/i2c-55' or `/dev/i2c/55': No such file or > directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-53/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-56/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-57/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-59/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-60/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-62/new_device: > No such file or directory > Error: Could not open file `/dev/i2c-63' or `/dev/i2c/63': No such file or > directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-61/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-64/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-65/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-66/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-66/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-68/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-69/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-70/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-71/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-72/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-73/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-74/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-74/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-76/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-77/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-78/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-79/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-28/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-80/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-81/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-82/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-83/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-84/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-84/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-86/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-86/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-88/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-89/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-90/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-91/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-92/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-92/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-94/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-94/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-96/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-97/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-98/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: /sys/bus/i2c/devices/i2c-99/new_device: > No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-100/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-100/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-102/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-102/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-104/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-105/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-106/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-107/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-108/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-108/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-110/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-110/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-112/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-113/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-114/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-115/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-116/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-116/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-118/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-118/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-120/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-121/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-122/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-123/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-124/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-124/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-126/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-126/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-128/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-129/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-130/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-131/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-132/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-132/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-134/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-134/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-136/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-137/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-138/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-139/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-140/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-140/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-142/new_device: No such file or directory > /usr/local/bin/i2c-utils.sh: line 40: > /sys/bus/i2c/devices/i2c-142/new_device: No such file or directory > [ 72.841988] i2c i2c-12: new_device: Instantiated device smb_syscpld at 0x3e > checking i2c driver binding status > 1-0040 (xdpe132g5c) - no driver bound > manually bind 1-0040 to driver xdpe132g5c > [ 72.932837] xdpe132g5c 1-0040: PMBus status register not found > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 1-0053 (mp2978) - no driver bound > manually bind 1-0053 to driver mp2978 > unable to locate i2c driver mp2978 in sysfs > 1-0059 (mp2978) - no driver bound > manually bind 1-0059 to driver mp2978 > unable to locate i2c driver mp2978 in sysfs > 11-0077 (pca9548) - no driver bound > manually bind 11-0077 to driver pca954x > [ 73.262603] pca954x 11-0077: probe failed > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 2-0070 (pca9548) - no driver bound > manually bind 2-0070 to driver pca954x > [ 73.429842] pca954x 2-0070: probe failed > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 3-0048 (lm75) - no driver bound > unable to find driver for 3-0048 > 3-0049 (lm75) - no driver bound > unable to find driver for 3-0049 > 3-004a (lm75) - no driver bound > unable to find driver for 3-004a > 3-004c (tmp422) - no driver bound > unable to find driver for 3-004c > 5-0035 (ucd90160) - no driver bound > manually bind 5-0035 to driver ucd9000 > [ 73.910736] ucd9000 5-0035: Failed to read device ID > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 5-0036 (ucd90160) - no driver bound > manually bind 5-0036 to driver ucd9000 > [ 74.082564] ucd9000 5-0036: Failed to read device ID > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 8-004a (lm75) - no driver bound > unable to find driver for 8-004a > 8-0051 (24c64) - no driver bound > manually bind 8-0051 to driver at24 > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > 8-0070 (pca9548) - no driver bound > manually bind 8-0070 to driver pca954x > [ 74.571980] pca954x 8-0070: probe failed > /usr/local/bin/i2c-utils.sh: line 168: echo: write error: No such device > total 18 i2c devices checked: 14 devices without drivers > exporting gpio (aspeed-gpio, GPIOF0), shadow=BMC_JTAG_MUX_IN > exporting gpio (aspeed-gpio, GPIOF1), shadow=BMC_UART_SEL_0 > exporting gpio (aspeed-gpio, GPIOF2), shadow=BMC_FCM_1_SEL > exporting gpio (aspeed-gpio, GPIOF3), shadow=FCM_2_CARD_PRESENT > exporting gpio (aspeed-gpio, GPIOF4), shadow=FCM_1_CARD_PRESENT > exporting gpio (aspeed-gpio, GPIOF5), shadow=BMC_SCM_CPLD_JTAG_EN_N > exporting gpio (aspeed-gpio, GPIOF6), shadow=FCM_2_CPLD_JTAG_EN_N > exporting gpio (aspeed-gpio, GPIOF7), shadow=BMC_FCM_2_SEL > exporting gpio (aspeed-gpio, GPIOG0), shadow=FCM_1_CPLD_JTAG_EN_N > exporting gpio (aspeed-gpio, GPIOG1), shadow=BMC_GPIO63 > exporting gpio (aspeed-gpio, GPIOG2), shadow=UCD90160A_CNTRL > exporting gpio (aspeed-gpio, GPIOG3), shadow=BMC_UART_SEL_3 > exporting gpio (aspeed-gpio, GPIOG4), shadow=SYS_CPLD_JTAG_EN_N > exporting gpio (aspeed-gpio, GPIOG6), shadow=BMC_I2C_SEL > exporting gpio (aspeed-gpio, GPIOG7), shadow=BMC_GPIO53 > exporting gpio (aspeed-gpio, GPIOI5), shadow=FPGA_BMC_CONFIG_DONE > exporting gpio (aspeed-gpio, GPIOI7), shadow=FPGA_NSTATUS > exporting gpio (aspeed-gpio, GPIOM3), shadow=BMC_UART_SEL_1 > exporting gpio (aspeed-gpio, GPION0), shadow=LM75_ALERT > exporting gpio (aspeed-gpio, GPION2), shadow=CPU_RST# > exporting gpio (aspeed-gpio, GPION3), shadow=GPIO123_USB2BVBUSSNS > exporting gpio (aspeed-gpio, GPION4), shadow=GPIO126_USB2APWREN > exporting gpio (aspeed-gpio, GPION5), shadow=GPIO125_USB2AVBUSSNS > exporting gpio (aspeed-gpio, GPIOP0), shadow=BMC_UART_SEL_2 > exporting gpio (aspeed-gpio, GPIOP6), shadow=BMC_GPIO61 > exporting gpio (aspeed-gpio, GPIOV1), shadow=UCD90160A_2_GPI1 > exporting gpio (aspeed-gpio, GPIOV2), shadow=UCD90160A_1_GPI1 > exporting gpio (aspeed-gpio, GPIOV3), shadow=PWRMONITOR_BMC > exporting gpio (aspeed-gpio, GPIOV4), shadow=BMC_PWRGD > exporting gpio (aspeed-gpio, GPIOV5), shadow=FPGA_DEV_CLR_N > exporting gpio (aspeed-gpio, GPIOV6), shadow=FPGA_DEV_OE > exporting gpio (aspeed-gpio, GPIOV7), shadow=FPGA_CONFIG_SEL > exporting gpio (aspeed-gpio, GPIOW0), shadow=LPCD0 > exporting gpio (aspeed-gpio, GPIOW1), shadow=LPCD1 > exporting gpio (aspeed-gpio, GPIOW2), shadow=LPCD2 > exporting gpio (aspeed-gpio, GPIOW3), shadow=LPCD3 > exporting gpio (aspeed-gpio, GPIOW4), shadow=LPCCLK > exporting gpio (aspeed-gpio, GPIOW5), shadow=LPCFRAME# > exporting gpio (aspeed-gpio, GPIOW6), shadow=LPCIRQ# > exporting gpio (aspeed-gpio, GPIOW7), shadow=LPCRST# > exporting gpio (aspeed-gpio, GPIOX6), shadow=BMC_FPGA_JTAG_EN > exporting gpio (aspeed-gpio, GPIOX7), shadow=BMC_TPM_SPI_PIRQ_N > exporting gpio (aspeed-gpio, GPIOY2), shadow=BMC_GPIO57 > exporting gpio (aspeed-gpio, GPIOY3), shadow=BMC_EMMC_RST_N > Failed to open /sys/bus/i2c/devices/50-0052/eeprom: No such file or directory > Failed to parse default EEPROM > Cannot open /dev/mtd1: No such file or directory > Error: unable to read MAC address from EEPROM or uboot-env! > /etc/rcS.d/S80setup_board.sh: line 35: echo: write error: No such device or > address > /etc/rcS.d/S80setup_board.sh: line 45: > /sys/bus/i2c/devices/12-003e/cpld_usb_mux_sel_0: Permission denied > /etc/rcS.d/S80setup_board.sh: line 46: > /sys/bus/i2c/devices/12-003e/cpld_usb_mux_sel_1: Permission denied > /etc/rcS.d/S80setup_board.sh: line 55: echo: write error: No such device or > address > head: /sys/bus/i2c/devices/12-003e/board_type: No such file or directory > failed to export (54-0021, 0): No such device or address > failed to export (54-0021, 1): No such device or address > failed to export (54-0021, 2): No such device or address > failed to export (54-0021, 3): No such device or address > failed to export (54-0021, 4): No such device or address > failed to export (54-0021, 7): No such device or address > head: /sys/bus/i2c/devices/2-0035/come_pwr_ok_status: Input/output error > Wait a few seconds to setup management port LED... > failed to export (62-0021, 0): No such device or address > failed to export (62-0021, 1): No such device or address > failed to export (62-0021, 2): No such device or address > failed to export (62-0021, 3): No such device or address > failed to export (62-0021, 4): No such device or address > failed to export (62-0021, 7): No such device or address > Starting mTerm console server...done. > Write to PHY 0xe.0x1c, value is 0x8801 > mTerm_log: mTerm: daemon started > Checking microserver power status ... > off > Write to PHY 0xe.0x1c, value is 0xb435 > Done! > Power on microserver .../usr/local/bin/wedge_power.sh: line 96: echo: write > error: No such device or address > /usr/local/bin/wedge_power.sh: line 97: echo: write error: No such device or > address > Failed > Error: Read failed > /etc/rcS.d/S86setup_avs.sh: line 28: [: : integer expression expected > Check AVS voltage... > cat: can't open '/sys/bus/i2c/devices/1-0040/hwmon/hwmon*/in3_input': No such > file or directory > Invalid AVS-Volt , re-create xdpe132g5c 1 times > [ 82.496320] i2c i2c-1: delete_device: Deleting device xdpe132g5c at 0x40 > [ 82.500273] xdpe132g5c 1-0040: PMBus status register not found > [ 82.500745] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > cat: can't open '/sys/bus/i2c/devices/1-0040/hwmon/hwmon*/in3_input': No such > file or directory > Invalid AVS-Volt , re-create xdpe132g5c 2 times > [ 83.561020] i2c i2c-1: delete_device: Deleting device xdpe132g5c at 0x40 > [ 83.563241] xdpe132g5c 1-0040: PMBus status register not found > [ 83.563581] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > cat: can't open '/sys/bus/i2c/devices/1-0040/hwmon/hwmon*/in3_input': No such > file or directory > Invalid AVS-Volt , re-create xdpe132g5c 3 times > [ 84.661966] i2c i2c-1: delete_device: Deleting device xdpe132g5c at 0x40 > [ 84.665578] xdpe132g5c 1-0040: PMBus status register not found > [ 84.666012] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > cat: can't open '/sys/bus/i2c/devices/1-0040/hwmon/hwmon*/in3_input': No such > file or directory > Invalid AVS-Volt , re-create xdpe132g5c 4 times > [ 85.751988] i2c i2c-1: delete_device: Deleting device xdpe132g5c at 0x40 > [ 85.755831] xdpe132g5c 1-0040: PMBus status register not found > [ 85.756250] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > cat: can't open '/sys/bus/i2c/devices/1-0040/hwmon/hwmon*/in3_input': No such > file or directory > Invalid AVS-Volt , re-create xdpe132g5c 5 times > [ 86.800715] i2c i2c-1: delete_device: Deleting device xdpe132g5c at 0x40 > [ 86.805334] xdpe132g5c 1-0040: PMBus status register not found > [ 86.805741] i2c i2c-1: new_device: Instantiated device xdpe132g5c at 0x40 > Error: Read failed > Invalid AVS value[126,130,134,138,142] > Starting USB Serial Console: usbcons. > Remove poweroff command from .bash > INIT: Entering runlevel: 5 > [ 88.102378] using random self ethernet address > [ 88.104132] using random host ethernet address > [ 88.107481] using host ethernet address: 02:00:00:00:00:02 > [ 88.108302] using self ethernet address: 02:00:00:00:00:01 > [ 89.030433] usb0: HOST MAC 02:00:00:00:00:02 > [ 89.032446] usb0: MAC 02:00:00:00:00:01 > [ 89.052630] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha > Day 2008 > [ 89.053131] g_cdc gadget: g_cdc ready > Configuring network interfaces... Setting vendor information in > /etc/dhcp/dhclient.conf > Initializing Bridge-IC I2C Frequency... > Failed to open /sys/bus/i2c/devices/50-0052/eeprom: No such file or directory > Failed to parse default EEPROM > [ 91.525079] ftgmac100 1e690000.ftgmac eth0: Link is Up - 100Mbps/Full - > flow control rx/tx > [ 91.526102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > net.ipv6.conf.usb0.autoconf = 0 > net.ipv6.conf.usb0.router_solicitations = 0 > done. > Starting random number generator daemon. > Setup dhclient for IPv6... done. > reloading rsyslogd ... done > Starting OpenBSD Secure Shell server: sshd > generating ssh RSA key... > generating ssh ECDSA key... > generating ssh DSA key... > generating ssh ED25519 key... > done. > Starting ntpd: done > starting rsyslogd ... rsyslogd: imfile: on startup file > '/var/log/mTerm_fuji.log' does not exist but is configured in static file > monitor - this may indicate a misconfiguration. If the file appears at a > later time, it will automatically be processed. Reason: No such file or > directory [v8.2002.0] > done > Setup IPMI message handler... done. > Starting IPMB Rx/Tx Daemon > Setup Caching for Bridge IC info..done. > Setup Front Panel Daemon...done. > Setup bic monitoring... done. > [ 106.568880] i2c i2c-4: delete_device: Deleting device slave-mqueue at 0x10 > [ 106.572161] i2c i2c-4: new_device: Instantiated device slave-mqueue at 0x10 > [ 106.654619] i2c i2c-0: delete_device: Deleting device slave-mqueue at 0x10 > [ 106.658349] i2c i2c-0: new_device: Instantiated device slave-mqueue at 0x10 > Setting fan speed to 50%... > /usr/local/bin/set_fan_speed.sh: line 76: > /sys/bus/i2c/devices/64-0033/fan1_pwm: No such file or directory > Done setting fan speed > Error: Read failed > Starting fscd... > done. > Setup sensor monitoring for FUJI... done. > Setup crond...starting Busybox Periodic Command Scheduler: crond... done. > done. > ok: run: restapi: (pid 1060) 1s > Error: unable to disable the 2nd watchdog: FMC_WDT2=0xFFFFFFFF > Setup eMMC Daemon.. > eMMC /dev/mmcblk0 Device Summary: > - Vendor/Product: MFR(0XAA) QEMU! > - eMMC Revision: v4.41 > - Secure Feature: secure-trim,auto-erase,secure-purge > - Device Health (PRE_EOL): Undefined > - Estimated Life Time (Type A): Undefined > - Bus Width: 4 > - H/W Reset Function: temporarily disabled (default) > - Cache Control: OFF > emmcd not started: device life time estimates not supported. > > OpenBMC Release fuji-b9c651226b > > bmc-oob login: Error: Cannot access Bridge-IC. > root > Password: > root@bmc-oob:~# lscpu > Architecture: armv7l > Byte Order: Little Endian > CPU(s): 2 > On-line CPU(s) list: 0,1 > Thread(s) per core: 1 > Core(s) per socket: 2 > Socket(s): 1 > Vendor ID: ARM > Model: 5 > Model name: Cortex-A7 > Stepping: r0p5 > BogoMIPS: 2400.00 > Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva > idivt vfpd32 lpae evtstrm > root@bmc-oob:~# uname -a > Linux bmc-oob. 5.10.23-fuji #1 SMP Wed Aug 25 09:15:46 UTC 2021 armv7l > GNU/Linux
