On 9/7/21 10:36 AM, Philippe Mathieu-Daudé wrote:
> On 9/7/21 8:58 AM, Cédric Le Goater wrote:
>> There is no use for it.
>
> Hmmm this is not the correct justification.
>
> This devices sits on a bus, so its state will be released when
> the bus is released. There is no need to release it manually,
> so we can remove the reference.
That's what the code is doing AFAIUI.
This is just removing the AspeedSMCFlash attribute because it is
not used anywhere else than under aspeed_board_init_flashes().
Is there anything else ? I am bit lost by your comment.
Thanks,
C.
>
>> Signed-off-by: Cédric Le Goater <c...@kaod.org>
>> ---
>> include/hw/ssi/aspeed_smc.h | 1 -
>> hw/arm/aspeed.c | 11 +++++------
>> 2 files changed, 5 insertions(+), 7 deletions(-)
>>
>> diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h
>> index 0ea536a44c3a..f32f66f9a838 100644
>> --- a/include/hw/ssi/aspeed_smc.h
>> +++ b/include/hw/ssi/aspeed_smc.h
>> @@ -37,7 +37,6 @@ typedef struct AspeedSMCFlash {
>> uint32_t size;
>>
>> MemoryRegion mmio;
>> - DeviceState *flash;
>> } AspeedSMCFlash;
>>
>> #define TYPE_ASPEED_SMC "aspeed.smc"
>> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
>> index 95ce4b1670ac..64c3a7fb66db 100644
>> --- a/hw/arm/aspeed.c
>> +++ b/hw/arm/aspeed.c
>> @@ -274,18 +274,17 @@ static void aspeed_board_init_flashes(AspeedSMCState
>> *s,
>> int i ;
>>
>> for (i = 0; i < s->num_cs; ++i) {
>> - AspeedSMCFlash *fl = &s->flashes[i];
>> DriveInfo *dinfo = drive_get_next(IF_MTD);
>> qemu_irq cs_line;
>> + DeviceState *dev;
>>
>> - fl->flash = qdev_new(flashtype);
>> + dev = qdev_new(flashtype);
>> if (dinfo) {
>> - qdev_prop_set_drive(fl->flash, "drive",
>> - blk_by_legacy_dinfo(dinfo));
>> + qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo));
>> }
>> - qdev_realize_and_unref(fl->flash, BUS(s->spi), &error_fatal);
>> + qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal);
>>
>> - cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
>> + cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
>> sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
>> }
>> }
>>
>
