This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property.
Signed-off-by: Kevin Townsend <kevin.towns...@linaro.org>
---
hw/sensor/Kconfig | 4 +
hw/sensor/lsm303dlhc_mag.c | 754 +++++++++++++++++++++++++++++++++++++
hw/sensor/meson.build | 1 +
3 files changed, 759 insertions(+)
create mode 100644 hw/sensor/lsm303dlhc_mag.c
diff --git a/hw/sensor/Kconfig b/hw/sensor/Kconfig
index a2b55a4fdb..1684e9bb3d 100644
--- a/hw/sensor/Kconfig
+++ b/hw/sensor/Kconfig
@@ -17,3 +17,7 @@ config ADM1272
config MAX34451
bool
depends on I2C
+
+config LSM303DLHC_MAG
+ bool
+ depends on I2C
diff --git a/hw/sensor/lsm303dlhc_mag.c b/hw/sensor/lsm303dlhc_mag.c
new file mode 100644
index 0000000000..4e3846b24a
--- /dev/null
+++ b/hw/sensor/lsm303dlhc_mag.c
@@ -0,0 +1,754 @@
+/*
+ * LSM303DLHC I2C magnetometer.
+ *
+ * Copyright (C) 2021 Linaro Ltd.
+ * Written by Kevin Townsend <kevin.towns...@linaro.org>
+ *
+ * Based on: https://www.st.com/resource/en/datasheet/lsm303dlhc.pdf
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+/*
+ * The I2C address associated with this device is set on the command-line when
+ * initialising the machine, but the following address is standard: 0x1E.
+ *
+ * Get and set functions for 'mag-x', 'mag-y' and 'mag-z' assume that
+ * 1 = 0.001 uT. (NOTE the 1 gauss = 100 uT, so setting a value of 100,000
+ * would be equal to 1 gauss or 100 uT.)
+ *
+ * Get and set functions for 'temperature' assume that 1 = 0.001 C, so 23.6 C
+ * would be equal to 23600.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/i2c/i2c.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "qemu/module.h"
+#include "qemu/log.h"
+#include "qemu/bswap.h"
+
+enum LSM303DLHCMagReg {
+ LSM303DLHC_MAG_REG_CRA = 0x00,
+ LSM303DLHC_MAG_REG_CRB = 0x01,
+ LSM303DLHC_MAG_REG_MR = 0x02,
+ LSM303DLHC_MAG_REG_OUT_X_H = 0x03,
+ LSM303DLHC_MAG_REG_OUT_X_L = 0x04,
+ LSM303DLHC_MAG_REG_OUT_Z_H = 0x05,
+ LSM303DLHC_MAG_REG_OUT_Z_L = 0x06,
+ LSM303DLHC_MAG_REG_OUT_Y_H = 0x07,
+ LSM303DLHC_MAG_REG_OUT_Y_L = 0x08,
+ LSM303DLHC_MAG_REG_SR = 0x09,
+ LSM303DLHC_MAG_REG_IRA = 0x0A,
+ LSM303DLHC_MAG_REG_IRB = 0x0B,
+ LSM303DLHC_MAG_REG_IRC = 0x0C,
+ LSM303DLHC_MAG_REG_TEMP_OUT_H = 0x31,
+ LSM303DLHC_MAG_REG_TEMP_OUT_L = 0x32
+};
+
+typedef struct LSM303DLHCMagState {
+ I2CSlave parent_obj;
+ uint8_t cra;
+ uint8_t crb;
+ uint8_t mr;
+ int16_t x;
+ int16_t z;
+ int16_t y;
+ uint8_t sr;
+ uint8_t ira;
+ uint8_t irb;
+ uint8_t irc;
+ int16_t temperature;
+ uint8_t len;
+ uint8_t buf[6];
+ uint8_t pointer;
+} LSM303DLHCMagState;
+
+#define TYPE_LSM303DLHC_MAG "lsm303dlhc_mag"
+OBJECT_DECLARE_SIMPLE_TYPE(LSM303DLHCMagState, LSM303DLHC_MAG)
+
+static void lsm303dlhc_mag_get_x(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value = s->x;
+
+ /* Convert to uT where 1000 = 1 uT. Conversion factor depends on gain. */
+ value *= 1000000;
+ switch (s->crb >> 5) {
+ case 1:
+ /* 11 lsb per uT. */
+ value /= 11000;
+ break;
+ case 2:
+ /* 8.55 lsb per uT. */
+ value /= 8550;
+ break;
+ case 3:
+ /* 6.70 lsb per uT. */
+ value /= 6700;
+ break;
+ case 4:
+ /* 4.50 lsb per uT. */
+ value /= 4500;
+ break;
+ case 5:
+ /* 4.00 lsb per uT. */
+ value /= 4000;
+ break;
+ case 6:
+ /* 3.30 lsb per uT. */
+ value /= 3300;
+ break;
+ case 7:
+ /* 2.30 lsb per uT. */
+ value /= 2300;
+ break;
+ default:
+ break;
+ }
+
+ visit_type_int(v, name, &value, errp);
+}
+
+static void lsm303dlhc_mag_get_y(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value = s->y;
+
+ /* Convert to uT where 1000 = 1 uT. Conversion factor depends on gain. */
+ value *= 1000000;
+ switch (s->crb >> 5) {
+ case 1:
+ /* 11 lsb per uT. */
+ value /= 11000;
+ break;
+ case 2:
+ /* 8.55 lsb per uT. */
+ value /= 8550;
+ break;
+ case 3:
+ /* 6.70 lsb per uT. */
+ value /= 6700;
+ break;
+ case 4:
+ /* 4.50 lsb per uT. */
+ value /= 4500;
+ break;
+ case 5:
+ /* 4.00 lsb per uT. */
+ value /= 4000;
+ break;
+ case 6:
+ /* 3.30 lsb per uT. */
+ value /= 3300;
+ break;
+ case 7:
+ /* 2.30 lsb per uT. */
+ value /= 2300;
+ break;
+ default:
+ break;
+ }
+
+ visit_type_int(v, name, &value, errp);
+}
+
+static void lsm303dlhc_mag_get_z(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value = s->z;
+
+ /* Convert to uT where 1000 = 1 uT. Conversion factor depends on gain. */
+ value *= 1000000;
+ switch (s->crb >> 5) {
+ case 1:
+ /* 9.8 lsb per uT. */
+ value /= 9800;
+ break;
+ case 2:
+ /* 7.6 lsb per uT. */
+ value /= 7600;
+ break;
+ case 3:
+ /* 6.0 lsb per uT. */
+ value /= 6000;
+ break;
+ case 4:
+ /* 4.0 lsb per uT. */
+ value /= 4000;
+ break;
+ case 5:
+ /* 3.55 lsb per uT. */
+ value /= 3550;
+ break;
+ case 6:
+ /* 2.95 lsb per uT. */
+ value /= 2950;
+ break;
+ case 7:
+ /* 2.05 lsb per uT. */
+ value /= 2050;
+ break;
+ default:
+ break;
+ }
+
+ visit_type_int(v, name, &value, errp);
+}
+
+static void lsm303dlhc_mag_set_x(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value;
+ int64_t reg;
+
+ if (!visit_type_int(v, name, &value, errp)) {
+ return;
+ }
+
+ /* Avoid divide by zero errors on valid zero value. */
+ if (value == 0) {
+ s->x = 0;
+ return;
+ }
+
+ /* Convert input from uT, accounting for current gain settings. */
+ switch (s->crb >> 5) {
+ case 1:
+ /* 11 lsb per uT = 0.0909090909 uT per lsb. */
+ reg = value * 1000 / 90909;
+ break;
+ case 2:
+ /* 8.55 lsb per uT = 0.1169590643 uT per lsb. */
+ reg = value * 1000 / 116959;
+ break;
+ case 3:
+ /* 6.7 lsb per uT = 0.1492537313 uT per lsb. */
+ reg = value * 1000 / 149253;
+ break;
+ case 4:
+ /* 4.5 lsb per uT = 0.2222222222 uT per lsb */
+ reg = value * 1000 / 222222;
+ break;
+ case 5:
+ /* 4.0 lsb per uT = 0.25 uT per lsb. */
+ reg = value * 1000 / 250000;
+ break;
+ case 6:
+ /* 3.3 lsb per uT = 0.303030303 uT per lsb */
+ reg = value * 1000 / 303030;
+ break;
+ case 7:
+ /* 2.3 lsb per uT = 0.4347826087 uT per lsb */
+ reg = value * 1000 / 434782;
+ break;
+ default:
+ error_setg(errp, "invalid gain in crb: 0x%02X", s->crb);
+ return;
+ }
+
+ /* Make sure we are within a 12-bit limit. */
+ if (reg > 2047 || reg < -2048) {
+ error_setg(errp, "value %lld out of register's range", value);
+ return;
+ }
+
+ s->x = (int16_t)reg;
+}
+
+static void lsm303dlhc_mag_set_y(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value;
+ int64_t reg;
+
+ if (!visit_type_int(v, name, &value, errp)) {
+ return;
+ }
+
+ /* Avoid divide by zero errors on valid zero value. */
+ if (value == 0) {
+ s->y = 0;
+ return;
+ }
+
+ /* Convert input to Gauss, accounting for current gain settings. */
+ switch (s->crb >> 5) {
+ case 1:
+ /* 11 lsb per uT = 0.0909090909 uT per lsb. */
+ reg = value * 1000 / 90909;
+ break;
+ case 2:
+ /* 8.55 lsb per uT = 0.1169590643 uT per lsb. */
+ reg = value * 1000 / 116959;
+ break;
+ case 3:
+ /* 6.7 lsb per uT = 0.1492537313 uT per lsb. */
+ reg = value * 1000 / 149253;
+ break;
+ case 4:
+ /* 4.5 lsb per uT = 0.2222222222 uT per lsb */
+ reg = value * 1000 / 222222;
+ break;
+ case 5:
+ /* 4.0 lsb per uT = 0.25 uT per lsb. */
+ reg = value * 1000 / 250000;
+ break;
+ case 6:
+ /* 3.3 lsb per uT = 0.303030303 uT per lsb */
+ reg = value * 1000 / 303030;
+ break;
+ case 7:
+ /* 2.3 lsb per uT = 0.4347826087 uT per lsb */
+ reg = value * 1000 / 434782;
+ break;
+ default:
+ error_setg(errp, "invalid gain in crb: 0x%02X", s->crb);
+ return;
+ }
+
+ /* Make sure we are within a 12-bit limit. */
+ if (reg > 2047 || reg < -2048) {
+ error_setg(errp, "value %lld out of register's range", value);
+ return;
+ }
+
+ s->y = (int16_t)reg;
+}
+static void lsm303dlhc_mag_set_z(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value;
+ int64_t reg;
+
+ if (!visit_type_int(v, name, &value, errp)) {
+ return;
+ }
+
+ /* Avoid divide by zero errors on valid zero value. */
+ if (value == 0) {
+ s->z = 0;
+ return;
+ }
+
+ /* Convert input to Gauss, accounting for current gain settings. */
+ switch (s->crb >> 5) {
+ case 1:
+ /* 9.8 lsb per uT = 0.1020408163 uT per lsb. */
+ reg = value * 1000 / 102040;
+ break;
+ case 2:
+ /* 7.6 lsb per uT = 0.1315789474 uT per lsb. */
+ reg = value * 1000 / 131578;
+ break;
+ case 3:
+ /* 6.0 lsb per uT = 0.1666666667 uT per lsb. */
+ reg = value * 1000 / 166666;
+ break;
+ case 4:
+ /* 4.0 lsb per uT = 0.25 uT per lsb */
+ reg = value * 1000 / 250000;
+ break;
+ case 5:
+ /* 3.55 lsb per uT = 0.2816901408 uT per lsb. */
+ reg = value * 1000 / 281690;
+ break;
+ case 6:
+ /* 2.95 lsb per uT = 0.3389830508 uT per lsb */
+ reg = value * 1000 / 338983;
+ break;
+ case 7:
+ /* 2.05 lsb per uT = 0.487804878 uT per lsb */
+ reg = value * 1000 / 487804;
+ break;
+ default:
+ error_setg(errp, "invalid gain in crb: 0x%02X", s->crb);
+ return;
+ }
+
+ /* Make sure we are within a 12-bit limit. */
+ if (reg > 2047 || reg < -2048) {
+ error_setg(errp, "value %lld out of register's range", value);
+ return;
+ }
+
+ s->z = (int16_t)reg;
+}
+
+/*
+ * Get handler for the temperature property.
+ */
+static void lsm303dlhc_mag_get_temperature(Object *obj, Visitor *v,
+ const char *name, void *opaque,
+ Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value;
+
+ /* Convert to 1 lsb = 0.125 C to 1 = 0.001 C for 'temperature' property. */
+ value = s->temperature * 125;
+
+ visit_type_int(v, name, &value, errp);
+}
+
+/*
+ * Set handler for the temperature property.
+ */
+static void lsm303dlhc_mag_set_temperature(Object *obj, Visitor *v,
+ const char *name, void *opaque,
+ Error **errp)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(obj);
+ int64_t value;
+
+ if (!visit_type_int(v, name, &value, errp)) {
+ return;
+ }
+
+ /* Input temperature is in 0.001 C units. Convert to 1 lsb = 0.125 C. */
+ value /= 125;
+
+ if (value > 2047 || value < -2048) {
+ error_setg(errp, "value %lld lsb is out of range", value);
+ return;
+ }
+
+ s->temperature = (int16_t)value;
+}
+
+/*
+ * Callback handler whenever a 'I2C_START_RECV' (read) event is received.
+ */
+static void lsm303dlhc_mag_read(LSM303DLHCMagState *s)
+{
+ s->len = 0;
+
+ /*
+ * The address pointer on the LSM303DLHC auto-increments whenever a byte
+ * is read, without the master device having to request the next address.
+ *
+ * The auto-increment process has the following logic:
+ *
+ * - if (s->pointer == 8) then s->pointer = 3
+ * - else: if (s->pointer >= 12) then s->pointer = 0
+ * - else: s->pointer += 1
+ *
+ * Reading an invalid address return 0.
+ *
+ * The auto-increment logic is only taken into account in this driver
+ * for the LSM303DLHC_MAG_REG_OUT_* and LSM303DLHC_MAG_REG_TEMP_OUT_*
+ * registers, which are the two common uses cases for it. Accessing either
+ * of these register sets will also populate the rest of the related
+ * dataset.
+ */
+
+ switch (s->pointer) {
+ case LSM303DLHC_MAG_REG_CRA:
+ s->buf[s->len++] = s->cra;
+ break;
+ case LSM303DLHC_MAG_REG_CRB:
+ s->buf[s->len++] = s->crb;
+ break;
+ case LSM303DLHC_MAG_REG_MR:
+ s->buf[s->len++] = s->mr;
+ break;
+ case LSM303DLHC_MAG_REG_OUT_X_H:
+ stw_be_p(s->buf, s->x);
+ s->len += sizeof(s->x);
+ stw_be_p(s->buf + 2, s->z);
+ s->len += sizeof(s->z);
+ stw_be_p(s->buf + 4, s->y);
+ s->len += sizeof(s->y);
+ break;
+ case LSM303DLHC_MAG_REG_OUT_X_L:
+ s->buf[s->len++] = (uint8_t)(s->x);
+ stw_be_p(s->buf + 1, s->z);
+ s->len += sizeof(s->z);
+ stw_be_p(s->buf + 3, s->y);
+ s->len += sizeof(s->y);
+ s->buf[s->len++] = (uint8_t)(s->x >> 8);
+ break;
+ case LSM303DLHC_MAG_REG_OUT_Z_H:
+ stw_be_p(s->buf, s->z);
+ s->len += sizeof(s->z);
+ stw_be_p(s->buf + 2, s->y);
+ s->len += sizeof(s->y);
+ stw_be_p(s->buf + 4, s->x);
+ s->len += sizeof(s->x);
+ break;
+ case LSM303DLHC_MAG_REG_OUT_Z_L:
+ s->buf[s->len++] = (uint8_t)(s->z);
+ stw_be_p(s->buf + 1, s->y);
+ s->len += sizeof(s->y);
+ stw_be_p(s->buf + 3, s->x);
+ s->len += sizeof(s->x);
+ s->buf[s->len++] = (uint8_t)(s->z >> 8);
+ break;
+ case LSM303DLHC_MAG_REG_OUT_Y_H:
+ stw_be_p(s->buf, s->y);
+ s->len += sizeof(s->y);
+ stw_be_p(s->buf + 2, s->x);
+ s->len += sizeof(s->x);
+ stw_be_p(s->buf + 4, s->z);
+ s->len += sizeof(s->z);
+ break;
+ case LSM303DLHC_MAG_REG_OUT_Y_L:
+ s->buf[s->len++] = (uint8_t)(s->y);
+ stw_be_p(s->buf + 1, s->x);
+ s->len += sizeof(s->x);
+ stw_be_p(s->buf + 3, s->z);
+ s->len += sizeof(s->z);
+ s->buf[s->len++] = (uint8_t)(s->y >> 8);
+ break;
+ case LSM303DLHC_MAG_REG_SR:
+ s->buf[s->len++] = s->sr;
+ break;
+ case LSM303DLHC_MAG_REG_IRA:
+ s->buf[s->len++] = s->ira;
+ break;
+ case LSM303DLHC_MAG_REG_IRB:
+ s->buf[s->len++] = s->irb;
+ break;
+ case LSM303DLHC_MAG_REG_IRC:
+ s->buf[s->len++] = s->irc;
+ break;
+ case LSM303DLHC_MAG_REG_TEMP_OUT_H:
+ /* Check if the temperature sensor is enabled or not (CRA & 0x80). */
+ if (s->cra & 0x80) {
+ s->buf[s->len++] = (uint8_t)(s->temperature >> 8);
+ s->buf[s->len++] = (uint8_t)(s->temperature & 0xf0);
+ } else {
+ s->buf[s->len++] = 0;
+ s->buf[s->len++] = 0;
+ }
+ break;
+ case LSM303DLHC_MAG_REG_TEMP_OUT_L:
+ if (s->cra & 0x80) {
+ s->buf[s->len++] = (uint8_t)(s->temperature & 0xf0);
+ } else {
+ s->buf[s->len++] = 0;
+ }
+ break;
+ default:
+ s->buf[s->len++] = 0;
+ break;
+ }
+}
+
+/*
+ * Callback handler when a device attempts to write to a register.
+ */
+static void lsm303dlhc_mag_write(LSM303DLHCMagState *s)
+{
+ switch (s->pointer) {
+ case LSM303DLHC_MAG_REG_CRA:
+ s->cra = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_CRB:
+ /* Make sure gain is at least 1, falling back to 1 on an error. */
+ if (s->buf[0] >> 5 == 0) {
+ s->buf[0] = 1 << 5;
+ }
+ s->crb = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_MR:
+ s->mr = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_SR:
+ s->sr = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_IRA:
+ s->ira = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_IRB:
+ s->irb = s->buf[0];
+ break;
+ case LSM303DLHC_MAG_REG_IRC:
+ s->irc = s->buf[0];
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "reg is read-only: 0x%02X", s->buf[0]);
+ break;
+ }
+}
+
+/*
+ * Low-level slave-to-master transaction handler.
+ */
+static uint8_t lsm303dlhc_mag_recv(I2CSlave *i2c)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(i2c);
+
+ if (s->len < 6) {
+ return s->buf[s->len++];
+ } else {
+ return 0xff;
+ }
+}
+
+/*
+ * Low-level master-to-slave transaction handler.
+ */
+static int lsm303dlhc_mag_send(I2CSlave *i2c, uint8_t data)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(i2c);
+
+ if (s->len == 0) {
+ /* First byte is the reg pointer */
+ s->pointer = data;
+ s->len++;
+ } else if (s->len == 1) {
+ /* Second byte is the new register value. */
+ s->buf[0] = data;
+ lsm303dlhc_mag_write(s);
+ } else {
+ g_assert_not_reached();
+ }
+
+ return 0;
+}
+
+/*
+ * Bus state change handler.
+ */
+static int lsm303dlhc_mag_event(I2CSlave *i2c, enum i2c_event event)
+{
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(i2c);
+
+ switch (event) {
+ case I2C_START_SEND:
+ break;
+ case I2C_START_RECV:
+ lsm303dlhc_mag_read(s);
+ break;
+ case I2C_FINISH:
+ break;
+ case I2C_NACK:
+ break;
+ }
+
+ s->len = 0;
+ return 0;
+}
+
+/*
+ * Device data description using VMSTATE macros.
+ */
+static const VMStateDescription vmstate_lsm303dlhc_mag = {
+ .name = "LSM303DLHC_MAG",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+
+ VMSTATE_I2C_SLAVE(parent_obj, LSM303DLHCMagState),
+ VMSTATE_UINT8(len, LSM303DLHCMagState),
+ VMSTATE_UINT8_ARRAY(buf, LSM303DLHCMagState, 6),
+ VMSTATE_UINT8(pointer, LSM303DLHCMagState),
+ VMSTATE_UINT8(cra, LSM303DLHCMagState),
+ VMSTATE_UINT8(crb, LSM303DLHCMagState),
+ VMSTATE_UINT8(mr, LSM303DLHCMagState),
+ VMSTATE_INT16(x, LSM303DLHCMagState),
+ VMSTATE_INT16(z, LSM303DLHCMagState),
+ VMSTATE_INT16(y, LSM303DLHCMagState),
+ VMSTATE_UINT8(sr, LSM303DLHCMagState),
+ VMSTATE_UINT8(ira, LSM303DLHCMagState),
+ VMSTATE_UINT8(irb, LSM303DLHCMagState),
+ VMSTATE_UINT8(irc, LSM303DLHCMagState),
+ VMSTATE_INT16(temperature, LSM303DLHCMagState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/*
+ * Put the device into post-reset default state.
+ */
+static void lsm303dlhc_mag_default_cfg(LSM303DLHCMagState *s)
+{
+ /* Set the device into is default reset state. */
+ s->len = 0;
+ s->pointer = 0; /* Current register. */
+ memset(s->buf, 0, sizeof(s->buf));
+ s->cra = 0x10; /* Temp Enabled = 0, Data Rate = 15.0 Hz. */
+ s->crb = 0x20; /* Gain = +/- 1.3 Gauss. */
+ s->mr = 0x3; /* Operating Mode = Sleep. */
+ s->x = 0;
+ s->z = 0;
+ s->y = 0;
+ s->sr = 0x1; /* DRDY = 1. */
+ s->ira = 0x48;
+ s->irb = 0x34;
+ s->irc = 0x33;
+ s->temperature = 0; /* Default to 0 degrees C (0/8 lsb = 0 C). */
+}
+
+/*
+ * Callback handler when DeviceState 'reset' is set to true.
+ */
+static void lsm303dlhc_mag_reset(DeviceState *dev)
+{
+ I2CSlave *i2c = I2C_SLAVE(dev);
+ LSM303DLHCMagState *s = LSM303DLHC_MAG(i2c);
+
+ /* Set the device into its default reset state. */
+ lsm303dlhc_mag_default_cfg(s);
+}
+
+/*
+ * Initialisation of any public properties.
+ */
+static void lsm303dlhc_mag_initfn(Object *obj)
+{
+ object_property_add(obj, "mag-x", "int",
+ lsm303dlhc_mag_get_x,
+ lsm303dlhc_mag_set_x, NULL, NULL);
+
+ object_property_add(obj, "mag-y", "int",
+ lsm303dlhc_mag_get_y,
+ lsm303dlhc_mag_set_y, NULL, NULL);
+
+ object_property_add(obj, "mag-z", "int",
+ lsm303dlhc_mag_get_z,
+ lsm303dlhc_mag_set_z, NULL, NULL);
+
+ object_property_add(obj, "temperature", "int",
+ lsm303dlhc_mag_get_temperature,
+ lsm303dlhc_mag_set_temperature, NULL, NULL);
+}
+
+/*
+ * Set the virtual method pointers (bus state change, tx/rx, etc.).
+ */
+static void lsm303dlhc_mag_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+ dc->reset = lsm303dlhc_mag_reset;
+ dc->vmsd = &vmstate_lsm303dlhc_mag;
+ k->event = lsm303dlhc_mag_event;
+ k->recv = lsm303dlhc_mag_recv;
+ k->send = lsm303dlhc_mag_send;
+}
+
+static const TypeInfo lsm303dlhc_mag_info = {
+ .name = TYPE_LSM303DLHC_MAG,
+ .parent = TYPE_I2C_SLAVE,
+ .instance_size = sizeof(LSM303DLHCMagState),
+ .instance_init = lsm303dlhc_mag_initfn,
+ .class_init = lsm303dlhc_mag_class_init,
+};
+
+static void lsm303dlhc_mag_register_types(void)
+{
+ type_register_static(&lsm303dlhc_mag_info);
+}
+
+type_init(lsm303dlhc_mag_register_types)
diff --git a/hw/sensor/meson.build b/hw/sensor/meson.build
index 034e3e0207..95406abd24 100644
--- a/hw/sensor/meson.build
+++ b/hw/sensor/meson.build
@@ -3,3 +3,4 @@ softmmu_ss.add(when: 'CONFIG_TMP421', if_true:
files('tmp421.c'))
softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c'))
softmmu_ss.add(when: 'CONFIG_ADM1272', if_true: files('adm1272.c'))
softmmu_ss.add(when: 'CONFIG_MAX34451', if_true: files('max34451.c'))
+softmmu_ss.add(when: 'CONFIG_LSM303DLHC_MAG', if_true:
files('lsm303dlhc_mag.c'))
--
2.30.1 (Apple Git-130)
