Nubus IRQs are routed to the CPU through the VIA2 device so wire up the IRQs
using gpios accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Reviewed-by: Laurent Vivier <laur...@vivier.eu>
---
hw/m68k/q800.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
index 074acf4fdc..5bc9df58a0 100644
--- a/hw/m68k/q800.c
+++ b/hw/m68k/q800.c
@@ -398,6 +398,12 @@ static void q800_init(MachineState *machine)
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
MAC_NUBUS_FIRST_SLOT * NUBUS_SLOT_SIZE);
+ for (i = 0; i < VIA2_NUBUS_IRQ_NB; i++) {
+ qdev_connect_gpio_out(dev, 9 + i,
+ qdev_get_gpio_in_named(via2_dev, "nubus-irq",
+ VIA2_NUBUS_IRQ_9 + i));
+ }
+
nubus = &NUBUS_BRIDGE(dev)->bus;
/* framebuffer in nubus slot #9 */
--
2.20.1
