This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Change uhci_update_irq() to allow this and implement it in
vt82c686-uhci-pci.
Signed-off-by: BALATON Zoltan <bala...@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.y...@flygoat.com>
---
v3: Do it more differently using qemu_irq instead as suggested by Gerd
v2: Do it differently to confine isa reference to vt82c686-uhci-pci as
hcd-uhci is also used on machines that don't have isa. Left Jiaxun's
R-b there as he checked it's the same for VT82C686B and gave R-b for
the 82c686b case which still holds but speak up if you tink otherwise.
hw/usb/hcd-uhci.c | 11 +++++------
hw/usb/hcd-uhci.h | 2 +-
hw/usb/vt82c686-uhci-pci.c | 12 ++++++++++++
3 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index 0cb02a6432..7201cd0ae7 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -31,6 +31,7 @@
#include "hw/usb/uhci-regs.h"
#include "migration/vmstate.h"
#include "hw/pci/pci.h"
+#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "qapi/error.h"
#include "qemu/timer.h"
@@ -290,7 +291,7 @@ static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t
td_addr)
static void uhci_update_irq(UHCIState *s)
{
- int level;
+ int level = 0;
if (((s->status2 & 1) && (s->intr & (1 << 2))) ||
((s->status2 & 2) && (s->intr & (1 << 3))) ||
((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) ||
@@ -298,10 +299,8 @@ static void uhci_update_irq(UHCIState *s)
(s->status & UHCI_STS_HSERR) ||
(s->status & UHCI_STS_HCPERR)) {
level = 1;
- } else {
- level = 0;
}
- pci_set_irq(&s->dev, level);
+ qemu_set_irq(s->irq, level);
}
static void uhci_reset(DeviceState *dev)
@@ -1170,9 +1169,9 @@ void usb_uhci_common_realize(PCIDevice *dev, Error **errp)
pci_conf[PCI_CLASS_PROG] = 0x00;
/* TODO: reset value should be 0. */
- pci_conf[USB_SBRN] = USB_RELEASE_1; // release number
-
+ pci_conf[USB_SBRN] = USB_RELEASE_1; /* release number */
pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
+ s->irq = pci_allocate_irq(dev);
if (s->masterbus) {
USBPort *ports[NB_PORTS];
diff --git a/hw/usb/hcd-uhci.h b/hw/usb/hcd-uhci.h
index e61d8fcb19..1f8ee04186 100644
--- a/hw/usb/hcd-uhci.h
+++ b/hw/usb/hcd-uhci.h
@@ -60,7 +60,7 @@ typedef struct UHCIState {
uint32_t frame_bandwidth;
bool completions_only;
UHCIPort ports[NB_PORTS];
-
+ qemu_irq irq;
/* Interrupts that should be raised at the end of the current frame. */
uint32_t pending_int_mask;
diff --git a/hw/usb/vt82c686-uhci-pci.c b/hw/usb/vt82c686-uhci-pci.c
index b109c21603..e70e739409 100644
--- a/hw/usb/vt82c686-uhci-pci.c
+++ b/hw/usb/vt82c686-uhci-pci.c
@@ -1,6 +1,16 @@
#include "qemu/osdep.h"
+#include "hw/irq.h"
#include "hcd-uhci.h"
+static void uhci_isa_set_irq(void *opaque, int irq_num, int level)
+{
+ UHCIState *s = opaque;
+ uint8_t irq = pci_get_byte(s->dev.config + PCI_INTERRUPT_LINE);
+ if (irq > 0 && irq < 15) {
+ qemu_set_irq(isa_get_irq(NULL, irq), level);
+ }
+}
+
static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp)
{
UHCIState *s = UHCI(dev);
@@ -14,6 +24,8 @@ static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error
**errp)
pci_set_long(pci_conf + 0xc0, 0x00002000);
usb_uhci_common_realize(dev, errp);
+ object_unref(s->irq);
+ s->irq = qemu_allocate_irq(uhci_isa_set_irq, s, 0);
}
static UHCIInfo uhci_info[] = {
--
2.21.4
