Hello, Here is large series QOM'ifying the PPC405 board. It introduces a new generic machine and SoC models, converts the current device models to QOM and populates the SoC. The process is quite mechanical without too much issues to handle. The noisy part is the initial patch introducing the SoC realize routine.
What's left ? * The DCR read/writre handler are attached in table to the CPU instance. We could probably rework the whole with a specific address space and memory regions handling the implemented registers. I don't think this is necessary. * the SDRAM mappings are very baroque and certainly could be simplified. I think we should QOMify the ppc440 machines before addressing this part. Thanks, C. Cédric Le Goater (19): ppc/ppc405: Remove taihu machine ppc/ppc405: Introduce a PPC405 generic machine ppc/ppc405: Move devices under the ref405ep machine ppc/ppc405: Introduce a PPC405 SoC ppc/ppc405: Start QOMification of the SoC ppc/ppc405: QOM'ify CPU ppc/ppc405: QOM'ify CPC ppc/ppc405: QOM'ify GPT ppc/ppc405: QOM'ify OCM ppc/ppc405: QOM'ify GPIO ppc/ppc405: QOM'ify DMA ppc/ppc405: QOM'ify EBC ppc/ppc405: QOM'ify OPBA ppc/ppc405: QOM'ify POB ppc/ppc405: QOM'ify PLB ppc/ppc405: QOM'ify MAL ppc/ppc405: QOM'ify FPGA ppc/ppc405: QOM'ify UIC ppc/ppc405: QOM'ify I2C docs/about/deprecated.rst | 9 - docs/system/ppc/embedded.rst | 1 - hw/ppc/ppc405.h | 210 ++++++++- include/hw/ppc/ppc4xx.h | 28 ++ hw/ppc/ppc405_boards.c | 366 ++++------------ hw/ppc/ppc405_uc.c | 802 +++++++++++++++++++++-------------- hw/ppc/ppc4xx_devs.c | 120 ++++-- 7 files changed, 887 insertions(+), 649 deletions(-) -- 2.37.1