According to the PCI specification, the hardware is not supposed to use
PCI_INTERRUPT_PIN for interrupt routing. Use the dedicated ACPI
Interrupt Select register for SCI routing instead.
Signed-off-by: Bernhard Beschow <shen...@gmail.com>
---
hw/isa/vt82c686.c | 42 ++++++++++++++++++++++++++++++------------
1 file changed, 30 insertions(+), 12 deletions(-)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 3f9bd0c04d..2189be6f20 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -46,6 +46,8 @@ struct ViaPMState {
ACPIREGS ar;
APMState apm;
PMSMBus smb;
+
+ qemu_irq irq;
};
static void pm_io_space_update(ViaPMState *s)
@@ -148,18 +150,7 @@ static void pm_update_sci(ViaPMState *s)
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0);
- if (pci_get_byte(s->dev.config + PCI_INTERRUPT_PIN)) {
- /*
- * FIXME:
- * Fix device model that realizes this PM device and remove
- * this work around.
- * The device model should wire SCI and setup
- * PCI_INTERRUPT_PIN properly.
- * If PIN# = 0(interrupt pin isn't used), don't raise SCI as
- * work around.
- */
- pci_set_irq(&s->dev, sci_level);
- }
+ qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE)
&&
!(pmsts & ACPI_BITMASK_TIMER_STATUS));
@@ -213,6 +204,13 @@ static void via_pm_realize(PCIDevice *dev, Error **errp)
acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2, false);
}
+static void via_pm_init(Object *obj)
+{
+ ViaPMState *s = VIA_PM(obj);
+
+ qdev_init_gpio_out(DEVICE(obj), &s->irq, 1);
+}
+
typedef struct via_pm_init_info {
uint16_t device_id;
} ViaPMInitInfo;
@@ -238,6 +236,7 @@ static void via_pm_class_init(ObjectClass *klass, void
*data)
static const TypeInfo via_pm_info = {
.name = TYPE_VIA_PM,
.parent = TYPE_PCI_DEVICE,
+ .instance_init = via_pm_init,
.instance_size = sizeof(ViaPMState),
.abstract = true,
.interfaces = (InterfaceInfo[]) {
@@ -568,6 +567,21 @@ static const VMStateDescription vmstate_via = {
}
};
+static void via_isa_set_pm_irq(void *opaque, int n, int level)
+{
+ ViaISAState *s = opaque;
+ uint8_t irq = pci_get_byte(s->pm.dev.config + 0x42) & 0xf;
+
+ if (irq == 2) {
+ qemu_log_mask(LOG_GUEST_ERROR, "IRQ 2 for PM controller is reserved");
+ return;
+ }
+
+ if (irq != 0) {
+ qemu_set_irq(s->isa_irqs[irq], level);
+ }
+}
+
static void via_isa_init(Object *obj)
{
ViaISAState *s = VIA_ISA(obj);
@@ -578,6 +592,8 @@ static void via_isa_init(Object *obj)
object_initialize_child(obj, "uhci2", &s->uhci[1],
TYPE_VT82C686B_USB_UHCI);
object_initialize_child(obj, "ac97", &s->ac97, TYPE_VIA_AC97);
object_initialize_child(obj, "mc97", &s->mc97, TYPE_VIA_MC97);
+
+ qdev_init_gpio_in_named(DEVICE(obj), via_isa_set_pm_irq, "sci", 1);
}
static const TypeInfo via_isa_info = {
@@ -664,6 +680,8 @@ static void via_isa_realize(PCIDevice *d, Error **errp)
if (!qdev_realize(DEVICE(&s->pm), BUS(pci_bus), errp)) {
return;
}
+ qdev_connect_gpio_out(DEVICE(&s->pm), 0,
+ qdev_get_gpio_in_named(DEVICE(d), "sci", 0));
/* Function 5: AC97 Audio */
qdev_prop_set_int32(DEVICE(&s->ac97), "addr", d->devfn + 5);
--
2.39.1
