hi, thank you for the link that helped me and allowed me to discover this project.
I managed to virtualize W$11 in TPM/SB mode as well as in "BIOS" mode (with the BypassTPMCheck and BypassSecureBootCheck register keys set to 1). W$11 works perfectly for me in "BIOS" mode : in other words, the network card is fully functional. I didn't go further with W$11 in TPM/SB mode, but I was able to start it, once the installation was done, with the SB disabled (file=./OVMF_CODE.fd) and without the TPM device. here are the command lines used in both cases : # TPM/SB mode $ swtpm socket --ctrl type=unixio,path=./swtpm.sock --terminate --tpmstate dir=. --tpm2 & $ qemu-system-x86_64 \ `# acceleration` \ -accel kvm \ `# CPU / 4G memory` \ -machine q35 \ -cpu host \ -smp cores=2 \ -m 4096 \ `# 720p` \ -device VGA,edid=on,xres=1280,yres=720 \ `# USB support` \ -device qemu-xhci \ -device usb-tablet \ `# secure boot` \ -global ICH9-LPC.disable_s3=1 \ -drive if=pflash,format=raw,file=./OVMF_CODE.secboot.fd,readonly=on \ -drive if=pflash,format=raw,file=./OVMF_VARS.fd \ `# tpm2` \ -chardev socket,id=chrtpm,path=./swtpm.sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-tis,tpmdev=tpm0 \ `# 64G hard drive` \ -hda ./11.disk \ -cdrom ./11.iso # "BIOS" mode with HKLM LabConfig register keys $ qemu-system-x86_64 \ `# acceleration` \ -accel kvm \ `# CPU / 4G memory` \ -machine q35 \ -cpu host \ -smp cores=2 \ -m 4096 \ `# 720p` \ -device VGA,edid=on,xres=1280,yres=720 \ `# USB support` \ -device qemu-xhci \ -device usb-tablet \ `# 64G hard drive` \ -hda ./11.disk \ -cdrom ./11.iso regards, lacsaP. Le jeu. 21 oct. 2021 à 10:58, Gabriel Dante Lima Chaves < gabriellimacha...@gmail.com> a écrit : > Hi, > > I've used the exact commands that they recommend doing on quickemu git > page https://github.com/wimpysworld/quickemu. It's as follows: > > $ quickget windows 11 > $ quickemu --vm windows-11.conf > > Hope it helps. > > Regards, > Gabriel > > On Thu, Oct 21, 2021 at 10:54 AM Pascal <patate...@gmail.com> wrote: > >> hi, >> >> could you provide all the commands that allowed you to run W$11 in a >> virtual machine? >> I have been trying in vain for a few days ( >> https://lists.nongnu.org/archive/html/qemu-discuss/2021-10/msg00016.html >> ). >> >> regards, lacsaP. >> >> Le mar. 19 oct. 2021 à 16:05, Gabriel Dante Lima Chaves < >> gabriellimacha...@gmail.com> a écrit : >> >>> Hello, >>> >>> I'm trying to run Windows 11 within Ubuntu 20.04 as the host machine, >>> and I can't get the VM to access the network via the ethernet cable. It >>> works fine when the host machine is connected to wifi, but the VM can't >>> access the network if the host is connected to the network through cable. >>> >>> Could you please help me solving this issue? >>> >>> Thanks in advance. >>> >>> Best regards, >>> >>> Gabriel. >>> >>
