hello michael,
I read about your discussion in the forum.
Then I first imported the georeferenced vector layer provided by the
itaian statistic institute with municipalities borders.
Looking in the metadata (left mouse-properties) I read that the
projection is UTM zone 32. But the "setting" project properties does
not show that kind of projection but suggests to set to WGS84.
I "apply" that suggestion and check OTF. But if I look in the
properties of the layer i find that they are still UTM zone 32.
Then I import a geoTIFF layer and I let ask for projection but I do
not find in the list the option UTM zone 32 so I set to wgs84.
But still they do not overlap correctly.
Still something wrong.
How can I set the project with UTM zone 35 pojection
or
how can I chenge the vector layer from UTM projection to WGS84?
Cannot find a solution.
someone can give me more information?
Thank you all.
Bernardo
Il giorno 30/set/08, alle ore 19:50, Michael Neubauer ha scritto:
Hello Bernando,
when both, raster and vector layer, use the same projection, they
should be in
the right place and in the right position to each other. So you cannot
just "move" the layers.
Maybe you should try to change the projection for the whole project.
So go to
settings > project properties > projection and activate "on the fly
projection" now you could try to change the projection for the whole
project.
e.g. just try the UTM coordinates for your zone and see what that
does.
But maybe just your maps are not referenced correctly. When you know
the
coordinates for one point on your map, you can put the cursor on
this point
and check the displayed coordinates at the right bottom of your
screen.
Good luck
Michael
p.s.: I had problems with the correct reference system at the
beginning as
well; see:
http://forum.qgis.org/viewtopic.php?f=2&t=718&p=1987&hilit=pinquin#p1987
Am Dienstag 30 September 2008 10:27:56 schrieb Bernardo Rossi Doria:
hello,
I am new to qgis.
Need help
I imported successfully a group of raster GeoTiff layers (Maps)
then I imported a referenced vector layer (Map of municipalities
borders officially distributed)
they are both (raster and vector) with the same projection (WGS84
+no_defs) but they have different origins so the do not overlap.
How to move the raster layers in the correct scale and/or position?
thankyou all
bernardo
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
