On 05/24/2011 09:13 PM, Chuck Young wrote: > The project Projection is: > NAD83 / UTM Zone 12 > +proj=utm +zone=12 +ellps=GRS80 +datum=NAD83 +units=m +no_defs > > I have reprojected all layers to this datum. > > I started with a raster layer from Landsat in the above projection. I > downloaded and reprojected, to the same projection, the Tiger files for > my county. > > All layers seem to load correctly. > > Just to be sure I have set the Options > CRS "Default Coordinate > Reference System" setting to the third option and that is set to the > same projection [+proj=utm +zone=12 +ellps=GRS80 +datum=NAD83 +units=m > +no_defs]. > > I am unsure what you refer to by "srs". Sorry. > > When I tried the scale dependent setting, I accessed it through the > [ABC] Labeling toolbar icon. then checked the enabled box in the scale > based labeling section. > > I am unsure what else is possible with the scale based display so I only > was thinking if there is some nifty thing that I may not be aware of you > might point me toward the tool.
Hi, First thing I noticed, is that I never used the [ABC] labeling toolbar icon.... I always do labeling via the Properties of a Layer (choosing properties in the Layers/Legend). That one is working... The other one (I think) is a newer more advanced labeling engine, apparently not yet working (I noticed it was not working together with the labeling I had with one other layer...) I will ask questions about this on the dev list. For you, for now: - please forget the [ABC]-button and label via the properties/label tab (that one is working) - be aware that you have to have both your qgis-project AND the initial data projections set correctly - If that is still not working, can you sent me some small test data set offlist? - srs = spatial reference system = projection/datum Regards, Richard Duivenvoorde _______________________________________________ Qgis-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/qgis-user
