Hi, I've been stuck on a problem for a few days now and could really use some help. I'm having the same problem reported in a previous post (Included below). Does anybody have suggestions to why this error (unable to read range file) may be occuring and how it can be fixed?
Thanks, Jay Subject: Re: [Qgis-user] Problem with QGIS importing raster into GRASS - msg#00134 List: qgis-user-gis Mail Archive Navigation: by Date: Prev Date Index by Thread: Prev Next Thread Index Hi, I just tested to import your raster and I had no problems whatsoever when adding it to the QGIS canvas. Cheers -- Giovanni -- On Wed, 2011-10-12 at 04:08 -0700, Hannah Pethen wrote: > Hi > > The raster is attached. > > I should clarify that the data is in a 'local' grid, and so cannot be > tied to a known co-ordinate system. The co-ordinate system chosen for > the GRASS mapset (British National Grid) is for expediency. As the > co-ordinates of the local grid are still within the numerical > parameters of the British National Grid co-ordinate system (i.e. it > still appears within the red 'location ' box), I cannot see that this > should cause it to fail when projecting but if it has, any thoughts on > how to correct it would be appreciated. > > Thanks > Hannah > > From: Giovanni Manghi <giovanni.manghi@xxxxxxxxx> > To: Hannah Pethen <hannahpethen@xxxxxxxxx> > Cc: "qgis-user@xxxxxxxxxxxxxxx" <qgis-user@xxxxxxxxxxxxxxx> > Sent: Monday, October 10, 2011 10:17 PM > Subject: Re: [Qgis-user] Problem with QGIS importing raster into GRASS > > Hi, > > I just tested in my Windows Seven 64 bit VM with qgis-dev/osgeo4w and > I > cannot replicate it. > > Can you share one of the rasters which is causing the crash? > > > Cheers > > -- Giovanni -- > > > On Mon, 2011-10-10 at 13:45 -0700, Hannah Pethen wrote: > > Dear All > > > > I am experiencing problems importing rasters from QGIS into GRASS > > using the GRASS toolbox in QGIS. Having created a new location and > > mapset, I attempt to import my raster into GRASS using the toolbox > in > > QGIS. When I run the r.in.gdal command, the raster is sucessfully > > created but when I click on 'View Output' I get the following error > > message: > > > > > > Cannot get map info > > Cannot run module > > command: C:/OSGeo4W/apps/qgis-dev/./grass/modules/qgis.g.info > > info=info rast=TIN280911@GurobDEM<br>TYPE:-1 > > <br> > > GRASS_INFO_WARNING(6068,1): Raster map <TIN280911@GurobDEM> not > found > > GRASS_INFO_END(6068,1) > > > > GRASS_INFO_WARNING(6068,2): Raster map <TIN280911@GurobDEM> not > found > > GRASS_INFO_END(6068,2) > > > > GRASS_INFO_WARNING(6068,3): can't read f_range file for > > [TIN280911@GurobDEM in ] > > GRASS_INFO_END(6068,3) > > > > GRASS_INFO_ERROR(6068,4): Unable to read range file > > GRASS_INFO_END(6068,4) > > > > At this point, QGIS stops running and has to be closed. > > > > I am runnning Windows 7 64 bit. > > > > Hannah > > _______________________________________________ > > Qgis-user mailing list > > Qgis-user@xxxxxxxxxxxxxxx > > http://lists.osgeo.org/mailman/listinfo/qgis-user > > > > > _______________________________________________ Qgis-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/qgis-user
