Hi Jonathan,
Perhaps it would make sense to go the extra mile and either test
another Geoserver WMTS or make your WMTS server publically available (at
least in a password protected manner) - so that people can test it.
Although WMTS is standardized there are often minor issues that prevent
particular implementations from working. I know that WMTS is working in
general. I was able to test it against an Intergraph-based WMTS server -
but I do not have a Geoserver instance at hand.
Andreas
On Fri, 2 Aug 2013 12:29:18 +0100, Jonathan Moules wrote:
Hi Andreas,
Yep, it's a local URL; that hostname is on our local DNS for our
mapping systems. The URL is correct; it works fine in ArcMap as
noted.
My QGIS cannot connect to the internet so I can't test with external
datasets; QGIS's proxy setup doesn't like our proxy.
I held off reporting as a bug because I didn't know if I was doing
something wrong and there's no error.
Can other folks connect to a GeoServer WMTS?
Thanks,
Jonathan
On 2 August 2013 12:25, Andreas Neumann wrote:
Hi Jonathan,
Are you sure that the URL is correct? It seems that this server is
only available locally. At least it is not a publically available
and correct URL.
If you think there is a bug in QGIS, please write a bug report and
provide a test URL.
Andreas
On Fri, 2 Aug 2013 11:51:55 +0100, Jonathan Moules wrote:
Thanks Andreas;
I'd suggest changing the following text:
- Tooltip
- dialog header
- Help (may be changed, but my help doesn't load right now!)
=====
Beyond that, it doesn't seem to work. I add my connection
(http://compass/geoserver/gwc/service/wmts [8] [8]), and then
when I click
"connect" it swaps to the "server search" tab. But there's
nothing
listed. I didn't tick any of the boxes.
GeoServer 2.3.4 WMTS.
ArcMap can connect to it, so I know it's not a problem with the
WMTS.
How do I get it to work?
It does connect to my WMS fine.
Thanks,
Jonathan
On 2 August 2013 10:52, Andreas Neumann wrote:
And this is already fixed in Master - see
http://hub.qgis.org/issues/8396 [5] [5] - thanks to Jürgen.
Andreas
On Fri, 02 Aug 2013 11:29:39 +0200, Andreas Neumann wrote:
Hi Jonathan,
You just use the WMS connection dialogue. It also works for
WMTS.
I am now opening a bug to change the "Add WMS layer" into
"Add
WMS/WMTS layer". This should make things clearer to the
users.
Andreas
On Thu, 1 Aug 2013 11:42:50 +0100, Jonathan Moules wrote:
Hi List,
How do I use WMTS in QGIS (weekly build)?
I've tried searches on:
* qgis.org [1] [1] [1] - no results
* wiki - no results
*
http://docs.qgis.org/2.0/html/en/docs/user_manual [2]
[2] [2] - one
results
about caches.
* plugs.qgis - no results
Thanks,
Jonathan
This transmission is intended for the named addressee(s)
only
and may
contain sensitive or protectively marked material up to
RESTRICTED and
should be handled accordingly. Unless you are the named
addressee (or
authorised to receive it for the addressee) you may not
copy or
use
it, or disclose it to anyone else. If you have received
this
transmission in error please notify the sender immediately.
All
email
traffic sent to or from us, including without limitation
all
GCSX
traffic, may be subject to recording and/or monitoring in
accordance
with relevant legislation.
Links:
------
[1] http://qgis.org [3] [3]
[2] http://docs.qgis.org/2.0/html/en/docs/user_manual [4]
[4]
--
--
Andreas Neumann
Böschacherstrasse 10A
8624 Grüt (Gossau ZH)
Switzerland
_______________________________________________
Qgis-user mailing list
Qgis-user@lists.osgeo.org [6] [6]
http://lists.osgeo.org/mailman/listinfo/qgis-user [7] [7]
This transmission is intended for the named addressee(s) only
and may
contain sensitive or protectively marked material up to
RESTRICTED and
should be handled accordingly. Unless you are the named addressee
(or
authorised to receive it for the addressee) you may not copy or
use
it, or disclose it to anyone else. If you have received this
transmission in error please notify the sender immediately. All
email
traffic sent to or from us, including without limitation all GCSX
traffic, may be subject to recording and/or monitoring in
accordance
with relevant legislation.
Links:
------
[1] http://qgis.org [9]
[2] http://docs.qgis.org/2.0/html/en/docs/user_manual [10]
[3] http://qgis.org [11]
[4] http://docs.qgis.org/2.0/html/en/docs/user_manual [12]
[5] http://hub.qgis.org/issues/8396 [13]
[6] mailto:Qgis-user@lists.osgeo.org [14]
[7] http://lists.osgeo.org/mailman/listinfo/qgis-user [15]
[8] http://compass/geoserver/gwc/service/wmts [16]
[9] mailto:a.neum...@carto.net [17]
--
--
Andreas Neumann
Böschacherstrasse 10A
8624 Grüt (Gossau ZH)
Switzerland
This transmission is intended for the named addressee(s) only and
may
contain sensitive or protectively marked material up to RESTRICTED
and
should be handled accordingly. Unless you are the named addressee (or
authorised to receive it for the addressee) you may not copy or use
it, or disclose it to anyone else. If you have received this
transmission in error please notify the sender immediately. All email
traffic sent to or from us, including without limitation all GCSX
traffic, may be subject to recording and/or monitoring in accordance
with relevant legislation.
Links:
------
[1] http://qgis.org
[2] http://docs.qgis.org/2.0/html/en/docs/user_manual
[3] http://qgis.org
[4] http://docs.qgis.org/2.0/html/en/docs/user_manual
[5] http://hub.qgis.org/issues/8396
[6] mailto:Qgis-user@lists.osgeo.org
[7] http://lists.osgeo.org/mailman/listinfo/qgis-user
[8] http://compass/geoserver/gwc/service/wmts
[9] http://qgis.org
[10] http://docs.qgis.org/2.0/html/en/docs/user_manual
[11] http://qgis.org
[12] http://docs.qgis.org/2.0/html/en/docs/user_manual
[13] http://hub.qgis.org/issues/8396
[14] mailto:Qgis-user@lists.osgeo.org
[15] http://lists.osgeo.org/mailman/listinfo/qgis-user
[16] http://compass/geoserver/gwc/service/wmts
[17] mailto:a.neum...@carto.net
[18] mailto:a.neum...@carto.net
--
--
Andreas Neumann
Böschacherstrasse 10A
8624 Grüt (Gossau ZH)
Switzerland
_______________________________________________
Qgis-user mailing list
Qgis-user@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qgis-user
