Hi Marco, Bernhard,
Marco, no I don´t think there is any directory permission problem, but I
will check again ....
I will also try Bernhard´s proposal to change the settings for the CRS
axis ...
regards,
Markus
--
Dr. Markus Weidenbach
*landConsult.de*
Geographical Information Management
and Environmental Planning
D-77815 Bühl
Germany
e.mail see: http://landConsult.de
Am 27.06.2014 09:27, schrieb Marco Hugentobler:
>Is there a limit of characters for paths or shapefile names used in
the QGIS *.qgs file that affects the qgis-mapserver?
Not that I know.
Is it possible that it is a problem with the file permissions for the
webserver user?
Regards,
Marco
On 27.06.2014 09:08, Markus Weidenbach wrote:
Dear List,
I am running the QGIS Web Client (checkout from GIT HUB on 25.06.14)
and QGIS Webserver 2.2.0 on Debian 7.
In GlobalOptions.js I set the authid variable to 31467 and I am
publishing only data in that projection ( I also disabled Google Maps
in GlobalOptions.js).
Everything works fine, but the ZOOM and the PAN function in QWC
behave strange, in fact it is almost impossible to zoom or pan to a
selected spot.
You can test it yourself on
http://188.138.88.141/qgis-web-client/site/qgiswebclient.html?map=/home/wbv/Untersuchungsgebiet_GK3_2.qgs
or
http://188.138.88.141/qgis-web-client/site/qgiswebclient.html?map=/var/www/qgis-web-client/projects/test_GK3.qgs
Any idea whats wrong here?
If I switch the QWC back to EPSG3857 the ZOOM/PAN works normal.
Another problem I encountered is the fact, that the webserver is not
reading shapefiles which use a very long directory path.
e.g. the shape
/var/www/qgis-web-client/projects/wbv/wbv-geodaten/shape/ugebiet/teilgebiet_nord_1km_kacheln.shp
is not listet in the GetCapabilities request (see
http://188.138.88.141/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetCapabilities&map=/var/www/qgis-web-client/projects/Untersuchungsgebiet_GK3.qgs).
But after copying the same shape to /home/wbv/wbv-geodaten/nord.shp
(together with the corrected *.qgs) this layer is listet in the
GetCapabilities request (see
http://188.138.88.141/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetCapabilities&map=/home/wbv/Untersuchungsgebiet_GK3_2.qgs)
and is also displayed in the QWC (see
http://188.138.88.141/qgis-web-client/site/qgiswebclient.html?map=/home/wbv/Untersuchungsgebiet_GK3_2.qgs).
Is there a limit of characters for paths or shapefile names used in
the QGIS *.qgs file that affects the qgis-mapserver?
Thanks for your comments.
Markus
--
Dr. Markus Weidenbach
*landConsult.de*
Geographical Information Management
and Environmental Planning
D-77815 Bühl
Germany
e.mail see: http://landConsult.de
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
--
Dr. Marco Hugentobler
Sourcepole - Linux & Open Source Solutions
Weberstrasse 5, CH-8004 Zürich, Switzerland
[email protected] http://www.sourcepole.ch
Technical Advisor QGIS Project Steering Committee
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
_______________________________________________
Qgis-user mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/qgis-user
