It might have added some extra padding to the geometry which I have seen cause issues.
Could you post of dump of a single line from your table? Nathan On Fri, 20 Feb 2015 7:14 am Johanna Botman < [email protected]> wrote: > Thanks to those who took the time to think about my issue. My projections > were / are fine, and I only have line geometry in this table > > I have been able to isolate the error to one involving MapInfo and Easy > Loader in 64bit. All my original tables were loaded using 32bit MI. Since > then we have updated to the latest 64bit version. Loading my table using > that seems to have caused the issue. > > It surprises me that the only program that had issues with representing > the layer was QGIS. It is usually so forgiving. > > _______________ > Johanna Botman > GIS / Assets Officer > > Griffith City Council > Ph: 02 6962 8168 > > > > > > ------------------------------ > This e-mail, together with any attachments, is for the exclusive and > confidential use of the addressee(s). Confidentiality is not waived if you > are not the intended recipient. Any other distribution, use of, or > reproduction without prior written consent is strictly prohibited. > > Views expressed in this e-mail are those of the individual, except where > specifically stated otherwise. If this e-mail has been sent to you in > error, please delete the e-mail completely and immediately from your > system. Although reasonable precautions are taken, Griffith City Council > does not warrant or guarantee this message to be free of errors, > interference, viruses or similar malicious code and does not accept > liability for any consequences to the recipient opening or using this email > or attachments. > > This email was scanned and cleared by MailMarshal & Norman AV > ------------------------------ > > _______________________________________________ > Qgis-user mailing list > [email protected] > http://lists.osgeo.org/mailman/listinfo/qgis-user
_______________________________________________ Qgis-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/qgis-user
