The other layers are coming off the network? If it's been working fine something else has changed by the sounds of it.
- Nathan On Wed, Jul 15, 2015 at 10:06 AM, Johanna Botman < [email protected]> wrote: > Thanks for the quick response Nathan, > > I'm not sure if you are familiar with Dial Before You Dig. When a request > is made for information about the underground assets in a particular area, > our council is one of the organisations that are asked to respond. That > request is emailed to us and contains a .gml file with the specified > location details. > > In order to speed up the processing at our end, I set up a project file > that accepts this gml file, we zoom to the layer, align that with the > canvas and produce the pdf file that goes back to the initial requestor. > > It worked fine for at least the last year. The layers in the project file > are not large. The largest is 13Mb, the smallest is a few kilobytes. There > are 17 layers in the project. I have had a request to put aerial imagery > under the maps, but have resisted that because of the size of the images. > > What else do you need to know? > > _______________ > Johanna Botman > GIS / Assets Officer > > > Griffith City Council > Ph: 02 6962 8168 > > [image: Inactive hide details for Nathan Woodrow ---15/07/2015 09:24:18 > AM---On Wed, Jul 15, 2015 at 9:13 AM, Johanna Botman < Johanna.]Nathan > Woodrow ---15/07/2015 09:24:18 AM---On Wed, Jul 15, 2015 at 9:13 AM, > Johanna Botman < [email protected]> wrote: > > From: Nathan Woodrow <[email protected]> > To: Johanna Botman <[email protected]>, > Cc: qgis-user <[email protected]> > Date: 15/07/2015 09:24 AM > Subject: Re: [Qgis-user] Loading issues with project file in QGIS 2.4 (64 > bit) > ------------------------------ > > > > > On Wed, Jul 15, 2015 at 9:13 AM, Johanna Botman < > *[email protected]* <[email protected]>> > wrote: > > but IT tell me it is the nature of open source software. > > > Good thing your IT is wrong then hey :P > > I also suspect network if the files are large it will pull the whole thing > over the network before it can open it. GML also isn't the most efficient > format in the world so take that into consideration. > > What other layers are in the project? If you have lots of network layers > it will try and read them when you load the new layer in order to refresh > the map, remember each pan is going to read the files to get the data. > > We will need a bit more info on the project and files to help more. > > - Nathan > > > > > > ------------------------------ > This e-mail, together with any attachments, is for the exclusive and > confidential use of the addressee(s). Confidentiality is not waived if you > are not the intended recipient. Any other distribution, use of, or > reproduction without prior written consent is strictly prohibited. > > Views expressed in this e-mail are those of the individual, except where > specifically stated otherwise. If this e-mail has been sent to you in > error, please delete the e-mail completely and immediately from your > system. Although reasonable precautions are taken, Griffith City Council > does not warrant or guarantee this message to be free of errors, > interference, viruses or similar malicious code and does not accept > liability for any consequences to the recipient opening or using this email > or attachments. > > This email was scanned and cleared by MailMarshal, Sophos & Kaspersky AV > ------------------------------ > >
_______________________________________________ Qgis-user mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/qgis-user
