On Sat, 2 Feb 2002 at 11:04:19, you wrote:
(ref: <004801c1abd9$5d5e5240$8e5187d9@network>)
>Hi Tony,
>
>The problem with the Superhermes SER3 is that, when the sernet program is
>loaded into the system. Sernet initialises the serial port with the
>parameters set in the config blocks.
>
>I have tried all the variations detailed in the Superhermes manual to all
>flow through the SER3 port. But Sernet just comes back with an error message
>saying there is a problem with the serial port.
>
>If SER1 or SER2 is used on the Aurora, everything is fine.
>
>I also tried the serial port redirection, which does not work as well. I
>anyone can get Superhermes SER3 port to work, then great.
>
>My guess is that the device driver is not a standard device. In that SMSQ/E
>does not recognise it like SER1 and SER2. Maybe just a re-write of the
>driver ocde is required.
I would think so. It clearly bypasses the normal ser1/2 drivers.
Pity. Maybe Jochen is in touch with Berndt, and could persuade him to
offer a ser3 option.
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
mailto:[EMAIL PROTECTED] http://www.firshman.demon.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
