>Rich Mellor wrote: >>well that's one out of 3 I guess - presume you also get the high colour >>mode (DISP_TYPE=33).
2 out of 4 now as I have no problem with it either & am still only on 3.03 on the Q60. Yes Disp_type returns 33, just checked. Also it might be a legacy in the other twos boot from earlier versions of smsq/e - I had the disp_size command in my boot to be used only if I booted with 2.98 which was in the rom & not configurable & 2.99 which was LRESPRed Duncan Neithercut -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Rich Mellor Sent: 22 December 2004 10:33 To: [EMAIL PROTECTED] Subject: Re: [ql-users] Problems with SMSQ/e On Wed, 22 Dec 2004 08:31:49 +0100, JÃrÃme Grimbert <[EMAIL PROTECTED]> wrote: > Rich Mellor wrote: >> I have now spoken with two people who say that they have configured >> SMSQ/e for the Q40/Q60 to start in 1024x512 resolution with high >> colour drivers, but it does not start up in that mode. They have to >> issue a >> > > I'm using a Q40, previously with 3.01, now with 3.07 (no intermediate > version), homebuilt (using Qmac). (Rom still in 2.98) > I have no trouble starting in 1024x512, once the file has been > configurated with menuconfig. well that's one out of 3 I guess - presume you also get the high colour mode (DISP_TYPE=33). > Nevertheless, I did tried to put the 3.01 on Eprom, but they never boot > the Q40. So, there is probably an issue and something broken somewhere. > (And yes, I know how to program correctly the eprom, I had no trouble > getting, modifiying and updating the 2.98 image... ) > I have not yet tested 3.07 on eprom, but given that patch trace, I have > barely any hope. Yes, this is something else that apparently needs to be fixed. Any volunteers ?? >> Also (I have not checked this myself) but someone with SMSQ/e v3.03 >> for the Gold Card (high colour version) has said that their boot >> program which just has LRESPR win1_smsq_gold now cycles - in the past >> it would not try to re-load smsq/e on top of itself. > > Well, my Q40 boot file starts with something along > 100 IF VER$(1)=="2.98" THEN LRESPR ... > > So at the second boot, there is no lrespr to do. I know that work around, but it should not ne necessary.... Certainly standard Gold Card smsq/e just ignores the LRESPR and goes to the next line - but the high colour v3.03 doesn't. -- Rich Mellor RWAP Services 26 Oak Road, Shelfield, Walsall, West Midlands WS4 1RQ http://www.rwapservices.co.uk/ _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
