Tony Firshman a écrit : > > Simple. Remove 8 screws - leaving the two under the microdrives, and > the top will lift off. > Note the position of the 6 LED wires (order of black is irrelevant), > lift the locking clip and remove them. Thanks. > > The membrane will certainly be the problem. Simply pull the tails out > of the connector. You may leave bits inside the connector - remove them > with tweezers. You *might* repair the membrane by snipping the neds - > equal amounts form the 4 pieces. However it is much more likely that it > is fractured further up where it bends. If so, it is dead. I had a little succes with the Spectrum 128k, rebuilt the cutted tracks with some sort of conductive paint.
I'done the same with an Amstrad CPC664, but with less success, the keyboard died little time after... Thanks all for your answer ! Jerome _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
