I presume you mean 2.35 !!
What hardware are you running this on? Is there any reason why you are
not using Xchange as that is by far the better program !
Rich
On Sun, 04 Jun 2006 19:57:00 +0100, Peter Fox <[EMAIL PROTECTED]> wrote:
> I am using 2.53 and am using the pointer environment commands including
> those which limit memory. The commands I am using are:
>
> ERT HOT_LOAD ('a','ABACUS' ,p, 120)
> ERT HOT_LOAD ('b','ARCHIVE' ,p,100)
> ERT HOT_LOAD ('c','QUILL' , p, 100)
>
>
>
> In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] (Rich
> Mellor) wrote:
>
>> *From:* "Rich Mellor" <[EMAIL PROTECTED]>
>> *To:* [EMAIL PROTECTED]
>> *Date:* Sun, 04 Jun 2006 16:39:54 +0100
>>
>> I wonder whether it is using up too much free memory - what version
>> of Abacus are you using and on what system??
>>
>> You should really use the Pointer Environment commands which specify
>> the amount of memory to be set aside for Psion programs (sure
>> someone will remind us all here) or at least set aside some memory
>> by setting up a RAM disk before executing the programs.
>>
>> Rich
>> www.rwapsoftware.co.uk
>> www.internetbusinessangels.com
>>
>> On Sun, 04 Jun 2006 16:26:00 +0100, Peter Fox <[EMAIL PROTECTED]>
>> > wrote:
>>
>> > It just says ERROR press space to continue.
>> >
>> > Above the 'error' it has 32 but what that means is not clear.
>> >
>> > If you press space nothing happens so off to jobs to clear it.
>> >
>> >
>> > In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
>> > (Tony
>> > Firshman) wrote:
>> >
>> >> *From:* Tony Firshman <[EMAIL PROTECTED]>
>> >> *To:* [EMAIL PROTECTED]
>> >> *Date:* Sun, 04 Jun 2006 11:33:34 +0100
>> >>
>> >> Peter Fox wrote:
>> >> > Hi there,
>> >> >
>> >> > I have three Psion Programs set up as ALT a for Abacus,
>> >> > ALT b for Archive, and
>> >> > ALT c for Quill.
>> >> >
>> >> > I have found that if I start with loading Abacus, it loads with
>> > > an
>> >> > error. On the other hand, if I start with either of the to her
>> > > two
>> >> > and then load Abacus, it loads properly.
>> >> >
>> >> > After the failed load, removing the job through QPAC2 and jobs
>> >> > shews that not only has Abacus loaded but there are two to her
>> >> > files there called 'ANON' which are removed by removing Abacus.
>> >> >
>> >> > I am using ERT HOT_LOAD for all three calls.
>> >> >
>> >> > Can anyone shed any light on this, please?
>> >> It would help if you said what the error is!
--
Rich Mellor
RWAP Services
26 Oak Road, Shelfield, Walsall, West Midlands, United Kingdom
WS4 1RQ
TEL: 01922 691607
URL:http://www.rwapservices.co.uk
URL:http://www.internetbusinessangels.com
Win £1000 -
URL:http://www.vwd-e.net/redir.asp?m=24487RM&target=/default.asp?goto=/vwdguest/match5.asp
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
