Rich Mellor writes: <> >> System QPC2 v3.33, SMSQ/E v3.13: >> >> 1 REMark lrespr'win2_debug_qmon' >> 2 LRESPR 'win2_rxt_Menu_rext': rem V7.66 Latest released version (?) >> 3 lrespr 'win2_util_file_qpac2': rem V1.45 - latest released version >> 4 rem lrespr 'win2_hdw_dzeta_FileInfo2_bin': rem MyFI2 >> 5 lrespr 'win2_rxt_fi2_FileInfo2_bin': rem Original, V3.50 umodified file >> 6 LRESPR 'win2_sed_QD': rem v B.01 >> 7 data_use 'win1_' >> 8 exep 'files' >> >> With the simple boot file above, when I execute my boot file from Qpac2 >> Files, - no pwoblem. When I execute the same (or any other) file a second >> time: Bang! QD starts up with 'QD_exe' in the box that should contain the >> file name, ie it should say - and load - 'win1_boot', but in fact says >> 'QD_exe' and loads nothing. >> >> I get lots of other crazy problems, such as Scrap not working etc, when I >> load my entire, newly refurbished, boot file. But common to them all is >> that if I omit loading FileInfo2_bin they all vanish - poof! >> >> I hasten to add that I confirmed the validity of this test by >> re-downloading FileInfo2 from source. Qpac2 was also recently >> renewed from source, as were QPC2 and SMSQ/E. QD is rather old, >> but that was a deliberate choice as I didnt like the upgrade, >> however, thats the only usable version I have. > >You do not say whether you are trying to Execute the boot file twice >separately or together (ie. do you close QD after the first attempt) > >Certainly I do not have this problem here (under either circumstance), >but then I only have FI2 v3.41
I just execute it once from Files and then do the same (or execute another file) again without closing the first one. The problem with FI2 v3.41 is that it doesnt understand Home Dir. Per _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
