In message <[EMAIL PROTECTED]>, Bob Spelten <[EMAIL PROTECTED]> writes >Op Wed, 24 Jan 2007 21:13:04 +0100 schreef Malcolm Cadman ><[EMAIL PROTECTED]>: > >> If the hard drive show a directory - with "dir win1_" - then the CD-ROM >> should be next with - "dir win2_" >> >> In DOS/Windows these are the C: and D: drives. >> >This is not automatically so for Qubide. >At startup only win1_ is mounted (first partition on the master drive). >Any other drive or partition needs to be mounted by the user. >WIN_DRIVE 2,1,2: will link win2_ to the second partition on the master >drive. >WIN_DRIVE 3,2,1: will link win3_ to the first partition on the slave drive. >There is a small freeware PE program WINLINK to make this easier. >(check the usual suspects/sites) > >But the CD does not contain a format that is known to Qubide so WIN_DRIVE >doesn't work here, you need the extensions mentioned earlier to access the >CD-ROM. > >Bob
Yes, I can see what it is doing. I haven't used a QUBIBE, which obviously requires some code to make the links to hardware devices. -- Malcolm Cadman _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
