Hi Tony,
You've already given this SGC a clean bill of health before
christmas when you had it running for a couple of days.
( do you remember ? )
On my QL i get a garbled initial screen with some random
lettering which apparently is the SGC startup text. It looks
like a spectacular crash. This screen is the same for both
my QL's but seeing as one has unreliable microdrives, it's
going back to the supplier along with the SGC for a
replacement which, fingers crossed, will work.
So, my SGC doesn't work with both my QL's, my GC
works with one and my trump card works with both.
Great.
No bent pins in sight.
I was hoping the ED drives could behave like normal drives
with the Trump Card but as it's only for a short while, I can
wait till I get a QL which likes my SGC then I can sell on the
GC and Trump Card.
Neil.
>>> [EMAIL PROTECTED] 05 February 2007 15:54 >>>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Neil Riley wrote:
> The only QL I own with working Microdrives for some reason
> refuses to work with my GC but works with my Trump card.
> whereas my other QL with very unreliable microdrives works
> fine with my GC.
>
> Because I am in the process of 'backing up' my microdrives to
> 3.5" disk, I am forced to use my trump card ( II i think ) however
> I am having difficulties when attached to my twin ED drives.
>
> For example
>
> dir flp1_
>
> This causes the ED drives to emit a sound reminisant of the head
> moving ( whirr ), what happens then is this sound is repeated
> except the pitch is slightly deeper or slowed down, it is then
> repeated again at an even deeper pitch and so on until it's
> almost in slow motion and then i switch everything off.
That is Tony Tebby's routines trying to work out the drive
characteristics.
>
> These ED drives work fine with the GC without the need for
> any FLP_JIGGLE.
>
> Can I assume ED drives don't work with a Trump Card.
Trump Card is based on 720k disk drives. It certainly would make no
sense of formatted ED disks. It should be able to format HD disks to
720k. Not sure about ED disks, but do not waste them on it (8-)#
>
> This is a tempory problem as I'll soon have my faulty microdrive
> Ql replaced with a working one which, fingers crossed will
> work with my SGC and therefore ED drives.
What do you see exactly when you try to boot with GC?
There should be no problem if TC works. Maybe you did not plug it in
fully. It is often difficult. I always put the QL vertically, which
makes it easier to align the expansion. Check no pins on the expansion
connector are bent.
Tony
- --
QBBS (QL fido BBS 2:252/67) +44(0)1442-828255
[EMAIL PROTECTED] http://firshman.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFx1NFM3RzOs8+btoRAuTBAJ9o6wHJjTpCWHtVrGtNhhUdF15/ZACfYWBm
yXQrs9iTnbl1mnzQGDfOPoI=
=NSZf
-----END PGP SIGNATURE-----
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
***********************************************************************************
The contents of this email are confidential to the intended recipient.
It may not be disclosed to or used by anyone other than the addressee, nor may
it be copied in any way. If received in error, please contact the company on
01793-715380, then delete it from your system. Please note neither the company
nor the sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any) for viruses.
No contract may be concluded on behalf of the company by means of email
communications.
BC Services (UK) Limited (trading as Boxclever), Technology House,
Ampthill Road, Bedford, MK42 9QQ. Registered No. 5290544 England
www.boxclever.co.uk
***********************************************************************************
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm