>>Hi Neil, Hi Rich, forgive me, I've been to the dentist hygienist and im still in
shock from her sonic scraper ! >>Now I do know some of the history of this, so forgive me if I jump past >>anyone's understanding. Indeed you do, you supplied QL B when my GC was giving me trouble. At the time the microdrives we working'ish. You also supplied the power supply which i use daily. >>As Tony stated, if a QL works with the Trump Card it should work with the >>Gold Card. For SGC you need to remove the 68008 chip. I removed my 68008's on several occasions, so many occasions in fact that the 68008 in QL B is now dead, so QL B has no 68008 at all but I currently have the GC in it so...... >>However, microdrives will not work if you have SMSQ/e installed so ensure >>you are not trying to use that. SMSQ/e not installed. >>The ED disk drives should work fine with a Trump Card - PROVIDED that you >>use DD diskettes. HD diskettes might just about get formatted to DD (but >>would then be unreadable on a system with Gold Card, or Super Gold Card). >>ED diskettes may not even work with Trump Card (I have never tried). Maybe it doesn't like the fact that the 3.5" discs im using ( which are HD) are already formatted as HD. Still, the noises happen when i FORMAT MDV1_workforme >>You state that you have 2 QLs - one with working microdrives, one without. Correct >>Is it correct that neither QL works with your SGC (even with the 68008 >>removed from the QL)? The SGC has been tested by Tony as ok and I am very >>surprised that even the QL I supplied does not work with it. You are correct again, SGC worked flawlessly for Tony which is good but frustrating for me. The SGC in the QL's give slightly diferent screens but generaly, as described. The wierd thing is that behing the crash, i can just about make out the SUPER GOLD CARD message that states the Version and Miracle systems text. >>Then you mention the Gold Card. The gold card works great in QL B but not in QL A, can't remember the symptoms now, and anyway, the SGC is my priority. >>Is the following correct? >>QL A - Working microdrives. Supports Trump Card only, but not SGC or GC. Correct >>QL B - Non-working microdrives. Supports Trump Card and Gold Card, but >>not SGC.. Spot on >What happens with QL A when (a) SGC is plugged in and (b) GC is plugged in >? For SGC, Mostly black and white blocky screen with the remanants of the SGC boot up text. as mentioned GC not important >>What happens with QL B when SGC is plugged in? Is this the same as on QL >>A? Similar to QL A but with bits of the multicolours you usually get with a QL bootup matted amonst the black and white blocky screen, same remanants of the SGC boot text. >>Please re-check with a second PSU as that may be a cause of some of your >>problems (hmm now this is where you need a voltmeter, in case neither PSU >>is providing the required output). It may be worth a trip to Argos for a voltmeter. I have tried with both PSU's in the past but as im determined with the QL ( & SGC ) a voltmeter may be a good idea >>I am very suprised that neither microdrive works on QL B - normally MDV2 >>will work if not MDV1. A solution is often to see if the rubber roller on >>the left hand side as you look in the microdrive slot may have worked its >>way up the post. Push it back down and it often solves the problem. They mostly don't work, occasionally do but generally don't. >>Rich I know this will be sorted, Will post SGC & QL to you soon unless I go down the Sandhurst route which is less likely. On Mon, 05 Feb 2007 14:41:20 -0000, Neil Riley <[EMAIL PROTECTED]> wrote: > Hi Chaps, > > The only QL I own with working Microdrives for some reason > refuses to work with my GC but works with my Trump card. > whereas my other QL with very unreliable microdrives works > fine with my GC. > > Because I am in the process of 'backing up' my microdrives to > 3.5" disk, I am forced to use my trump card ( II i think ) however > I am having difficulties when attached to my twin ED drives. > > For example > > dir flp1_ > > This causes the ED drives to emit a sound reminisant of the head > moving ( whirr ), what happens then is this sound is repeated > except the pitch is slightly deeper or slowed down, it is then > repeated again at an even deeper pitch and so on until it's > almost in slow motion and then i switch everything off. > > These ED drives work fine with the GC without the need for > any FLP_JIGGLE. > > Can I assume ED drives don't work with a Trump Card. > > This is a tempory problem as I'll soon have my faulty microdrive > Ql replaced with a working one which, fingers crossed will > work with my SGC and therefore ED drives. > > Cheers > Neil > -- Rich Mellor RWAP Services URL:http://www.rwapsoftware.co.uk URL:http://www.rwapservices.co.uk _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm *********************************************************************************** The contents of this email are confidential to the intended recipient. It may not be disclosed to or used by anyone other than the addressee, nor may it be copied in any way. If received in error, please contact the company on 01793-715380, then delete it from your system. Please note neither the company nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any) for viruses. No contract may be concluded on behalf of the company by means of email communications. BC Services (UK) Limited (trading as Boxclever), Technology House, Ampthill Road, Bedford, MK42 9QQ. Registered No. 5290544 England www.boxclever.co.uk *********************************************************************************** _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
