Dilwyn Jones wrote, On 12/03/09 17:09:
sending you a scan off list.
I think Dilwyn's site also has a zip file detailing how to make a
scart cable. If not I had a zip file downloaded with diagrams and
instructions from another QL site previously.
Duncan
Not been on for a bit... article is on
www.dilwyn.uk6.net/docs/hardware/index.html or
www.dilwyn.uk6.net/docs/hardware/scart.zip
Author of the article was Richard Cooke.
The nice bit of this article was that he explained how the values of
the resistors had been worked out - how the voltages were calculated
and so on.
The simplest way was probably to wire to the composite signal part of
a Scart connection, but that may not have been quite as good quality
as using the RGB signals.
Definitely not so good, and not *that* much simpler.
Tony
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
[email protected] http://firshman.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
