Dear Rich Mellor
I have some commets about HxC
1 . I have a Ql with gold card and another with Trump Card
Can I transfer files between HxC virtual floppy and the real floppy?
2. Can I do the same with disciple and plus d for my Spectrum128?
3. You can power the device with power supply for external HDD
like this
http://cgi.ebay.co.uk/USB-2-0-SATA-IDE-2-5-3-5-Cable-HDD-w-Power-Adapter-/330462239119?pt=UK_Computing_CablesConnectors_RL
Yours
Michael
--------------------------------------------------
From: "Rich Mellor" <[email protected]>
Sent: Wednesday, August 18, 2010 10:07 AM
To: <[email protected]>
Subject: [Ql-Users] Getting the Sinclair QL to use an SD Card
Well, its another day, and some good news for the QL at last :-)
We have now successfully tested the HxC Floppy Disk drive emulator with
the Sinclair QL home computer, meaning that you can now copy raw images of
Sinclair QL disks to an SD card, and then connect this floppy disk drive
emulator to your QL's disk interface and read/write to an SD card instead
of floppy disks.
The latest v3.0 of Q-emuLator supports raw disk images, so when that is
officially released, you should be able to use that to get software into
the raw disk format required. Then all you need to do, is to convert it
using the supplied HxC software, copy it to the SD card and then hey
presto, the QL sees it as a floppy disk! At the moment, I can only get
Q-emuLator to read from raw disk images, although Daniele is working on
raw disk image support.
You can copy any number of floppy disk images to your SD card, and then
use the buttons on the front of the control panel to set up which disk
image is to be seen by the Sinclair QL as FLP1 and which is to be seen as
FLP2.
Currently, it only appears to support DD disks, although I daresay it will
work with other disk types if I had some raw disk images of QL HD and QL
ED disks to try (I cannot make them on my PC).
Ideally, we need to find some power supplies which can be used to power
these units - at the moment, we are using an old external floppy disk
case. Also, for some reason, both the Gold Card and the MicroP disk
interface we have here needed the cable the other way around to the QL
norm!
This means that the HxC Floppy Disk Drive Emulator available from
SellMyRetro.com
<http://www.sellmyretro.com/search/naturalSearch?keyword=hxc> has now been
shown to successfully work with all of the following equipment as a
complete replacement for the good old floppy disk drive:
* Any computer / piece of equipment that uses PC formatted floppy
disks (3.5", 5.25" or even 8" drives)
* Atari ST/STF/Falcon
* Amstrad CPC6128
* Commodore Amiga (currently write only)
* Dragon 32 / 64 (VDK or JVC disk format, which should also
therefore work with the Tandy CoCo)
* Emax and Emax II Sampler
* Ensoniq Mirage Sampler
* Korg DSS-1 Synthesizer
* MSX2
* Oberheim DPX1 Sampler
* Oric Computer (with MicroDisk)
* PC
* PC88
* SAM Coupe *.MGT and *.SAD formats
* Sinclair QL raw disk images
* Sinclair ZX Spectrum +3 or Sinclair ZX Spectrum with PlusD disk
Interface
* Super Wildcard DS-SWC3201
* Thomson TO8D
* TI99/4A
* x68000
--
Rich Mellor
RWAP Services
http://www.rwapsoftware.co.uk
http://www.rwapservices.co.uk
-- Try out our new site: http://sellmyretro.com
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
