On Mon, Feb 21, 2011 at 12:59 PM, Adrian Ives <[email protected]> wrote:
> Yes, the ATX connector (or better) is a must. You probably want to look > into > an adapter lead that also bridges the Power Good signal, otherwise you > won't > get the PSU to switch on. This is what I had to do with my QPlanes in ATX > cases. Hehe, this. When you solved that problem, what did you bridge it to? I just shunted it through a resistor to ground in my prototype, as the PSUs I tested only provided 5V at 10-20mA. And, have a good insulating backing plate, because there's nothing worse than 40 amps of 12V shorting onto something metal in the case, or worse, to something on a PCB... Dave _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
