I have not been able to get the medic board up and running as of yet, however I
have come across some hand written notes mainly about the commands used by the
board (once working) and then this strange comments which looks like a mod. All
it says is 10nF across R3 and 10 pF across C1, now the first I can understand
if I could find R3 on the board but it was late last night so I might try again
in daylight, looking at TF circuit diagrams, I still cant find it unless they
are part of the oscillator cct around IC26 8Mhz as they don't appear to be
marked up. 10 pf across an existing capacitor (if that's what it means will
change the timing to something as far as I know, how significant it would
well...
I haven't been able to get D1, the only led on the board to illuminate either
that appears to be part of the device enable circuitry, am I missing something
obvious or just bad eyesight, anyone any ideas?
Lee
-: Back to the QL :-
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
