John, My Raspberry PI shipped today, so I hope to be trying this myself over the weekend. I am interested to hear if you resolve this issue, and if not I may be looking at it myself.
Dave Walker Home: 01707 652791 Web: www.itimpi.com Skype: itimpi Sent from my iPad3 On 24 May 2012, at 12:37, John Southern <[email protected]> wrote: > Hi All, > > Is anyone able to assit or at least start me off on a general direction. > I am trying to get the uQLx running on a slow (MK.all takes 160 seconds), > memory restricted Raspberry Pi with the Armel architecture. > > Following Javier's instructions from a message sent 10:17 27/11/2009 I edited > the config file to the gcc version I was using and commented out the line in > unixstuff.c for RTOP. I used gcc 4.1.3 although 4.4 gives an identical error. > The install appears to run without throwing up errors although there are > plenty of warnings. > > When I try to start the emulator, the outline of the QL screen briefly > flashes > up on screen before I get the followinf error message > > pi@raspberrypi:~/bin$ ./qm > problem, stat failed : No such file or directory > - MountPoint /dev/fd0 for device FLP1_ may not be accessible > *** QL Emulator v0.81 *** > release 2010-02-25 > > Terminate on signal 11 > This may be due to an internal error, > a feature not emulated or an 68000 exception > that typically occurs only when QDOS is unrecoverably > out of control > FATAL error, PC may not be displayed correctly > DebugInfo: PC=16c, code=ffffadc7, SupervisorMode: yes USP=0 SSp=30000 A7=30000 > Register Dump: Dn An > 0 0 0 > 1 0 0 > 2 0 0 > 3 0 0 > 4 0 0 > 5 0 0 > 6 0 0 > 7 0 30000 > pi@raspberrypi:~/bin$ > > Regards > John > > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
