On Tue, Mar 12, 2013 at 3:36 PM, Tony Firshman <[email protected]> wrote:
> Also provided is a standard ROM slot as an alternative when using Aurora, >> which doesn't have the standard connector. When used with Aurora, this ROM >> slot is fitted facing towards the case back, allowing access through the >> back without opening the case. >> > It can be fitted either way with either Aurora or QL motherboard. I hope, > Dave, you have left it off for customer specification. It is often only > possible to use facing in, depending on the case. > > In fact the ROM slot (and CTRL port I believe) have to be removed from the > QL motherboard as an expansion card in the lower slot overlaps the QL > board. One hole on SGC (and maybe GC) lines up *exactly* with a hole on > the QL board for fixing. > > As Dave says, both the lower boards can be fixed direct to the case. I have made some each way. Buyers can request whichever type they would like, or I can supply the ROM socket and clear instructions, if they are comfortable doing their own soldering. _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
