Derek, Windows makes a lot of sense if you have the QXL PC connected to a network (I personally use OS/2 Warp on my QXL PC, much for the same reason.)
your "ASSIGN" tip works fine if you want more than one QXL drive. Tobias -----Original-Nachricht----- Betreff: Re: [Ql-Users] QPC2 and Win 8 Datum: Mon, 20 Jul 2015 13:03:19 +0200 Von: Derek Stewart <de...@q40.de> An: ql-us...@q-v-d.com On 20/07/15 11:26, BSJR wrote: > Op Sat, 18 Jul 2015 23:40:45 +0200 schreef Marcel Kilgus > <ql-us...@mail.kilgus.net>: > >> jms1 wrote: >>> The real problem is the locations for the win1 to 8 is hard coded in >>> the scource of smsq and smsqe. >> >> What are you talking about? This has never been the case for QPC. >> >> Marcel >> > To complete the picture, this was and still is (as far as I know) the > case for the QXL ISA card. > There the QXL.win file must be in the root of your partition(s). > I very much doubt this will be a problem for W$8 users. > > Bob > Hi, Not sure why you are using Windows with a QXL... but you could use assign the C:\ to a folder and have the QXL.WIN file for WIN1 there. But this requires a DOS command, maybe not work in Windows. Regards, Derek _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
