Hi,
There is no mistake.
The Q40/60 has the following SQ/E video modes:
512x256 4/8 Colour. Standard QL Colours512x256 Mode 33 24 bit colour1024x512 
Mode 33 24 bit colour
I will check on my Q60 the DISP_TYPE values and report back tomorrow.
RegardsDerek
-------- Original message --------From: Giorgio Garabello via Ql-Users 
<ql-users@lists.q-v-d.com> Date: 11/11/2017  19:29  (GMT+00:00) To: 
ql-us...@q-v-d.com Cc: Giorgio Garabello <g.garabe...@gmail.com> Subject: Re: 
[Ql-Users] Q40 display mode 
Ok, so there's a mistake in the smsqe manual?

2017-11-11 20:27 GMT+01:00 duncan . via Ql-Users <ql-users@lists.q-v-d.com>:

> smsqe is required for 16 bit colours so 33 is the answer
>
> On Sat, Nov 11, 2017 at 6:48 PM, Giorgio Garabello via Ql-Users <
> ql-users@lists.q-v-d.com> wrote:
>
> > The question is: on q40 with 16 bit mode color if i type print Disp_type
> > what i see? 1 or 33?
> >
> > Il 11 nov 2017 18:50, "Peter Graf via Ql-Users" <
> ql-users@lists.q-v-d.com>
> > ha scritto:
> >
> > Am 11.11.2017 um 17:58 schrieb Giorgio Garabello via Ql-Users:
> > > 64 – 24-bit colour mode (no hardware supports this at the time of
> > writing)
> >
> > Hmmm... was there _software_ support at the time of writing?
> >
> > > DISP_TYPE
> > > The DISP_TYPE function is used to find the type of display. For the
> Q40,
> > > there are two values that may be returned.
> > > 0 Original ST QL emulator (this value is returned on QL based
> hardware).
> > > *1 16 bit colour mode.*
> >
> > The Q40 supports both original QL hardware modes and 16 bit highcolour.
> > It depends on what you select.
> >
> > Peter
> >
> >
> >
> > _______________________________________________
> > QL-Users Mailing List
> > _______________________________________________
> > QL-Users Mailing List
> _______________________________________________
> QL-Users Mailing List
_______________________________________________
QL-Users Mailing List
_______________________________________________
QL-Users Mailing List

Reply via email to