Hi everyone, John kindly sent me a lot of photos of the cable and the
manual.
Unfortunately, the design of the card is missing, without which it is not
possible to recreate the cable.
Do any of you have this documentation?

Il sab 28 apr 2018, 07:15 Giorgio Garabello <g.garabe...@gmail.com> ha
scritto:

> Hi, many thanks!
> My address is g.garabe...@gmail.com
>
> Il sab 28 apr 2018, 01:48 John Impellizzeri via Ql-Users <
> ql-users@lists.q-v-d.com> ha scritto:
>
>> Giorgio,
>>
>> I remember this and actually have the IDE Expander as it was called.  I
>> don’t remember if it was demonstrated or shown at one of the US shows but I
>> do at least remember it was talked about and I eventually ordered one from
>> QUBBESoft.  I only attended the US shows so it very well could have been
>> shown at others.
>>
>> I still have the paperwork that came with it.  I never could get it to
>> work however.  I don’t know if it was my QubIDE as I had an early version
>> or it may have been due to the bus expander I was using.
>>
>> It was a small circuit board with a 40 pin IDE socket and another small
>> socket next to it that when plugged in connected to the 6 pin header on the
>> QubIDE.  There are a few diodes and a small surface mount IC on the board
>> as well.  This side of the board was painted black so it covers the IC
>> number.  There was no circuit diagram in the documentation.
>>
>> A 50 pin ribbon cable was attached.  One edge of the cable has 10 of the
>> wires separated out and these are connected in various combinations to the
>> 40 pin connectors as drive select lines I presume.
>>
>> The documentation said to jumper each drive as a master and went on to
>> explain how to use the WIN_DRIVE command to assign the drives.  It was
>> recommended to use ROM v1.35 or later and was supposed to identify all
>> drives at power up.
>>
>> I don’t recall now what problem I had with it just that I couldn’t get it
>> to work and set it aside.
>>
>> I don’t think the list will accept attachments but if you want further
>> info or pictures let me know with your email address and I can send it to
>> you.
>>
>>
>> John
>>
>>
>> > On Apr 27, 2018, at 10:29 AM, Giorgio Garabello via Ql-Users <
>> ql-users@lists.q-v-d.com> wrote:
>> >
>> > Many years ago I read somewhere that it was possible to connect 4 hard
>> > drives on the same Qbide, an Italian user has confirmed to me that
>> "Nasta"
>> > demonstrated this to some meeting.
>> > None of us remember the details, where can I find information about it?
>> > Thanks in advance to everyone.
>> >
>> > Giorgio
>> > _______________________________________________
>> > QL-Users Mailing List
>>
>> _______________________________________________
>> QL-Users Mailing List
>
>
_______________________________________________
QL-Users Mailing List

Reply via email to