Hi, Yes, thanks, that will be in the next version of SMSQE.
I sent Fabrizio a preview version with that fix already included, I presume that is what Fabrizio is using.... I'm not sure whether that is his problem, though. Woflgang > >> Just a question - what happens if you re-load (per LRESPR ,not >> automatically at boot time) > > Yes, I was about to ask the same question, but you bet me to it. > > It is probably the same issue as the one I encountered with my HD that > is too slow to show up on the IDE bus when SMSQ/E v3 is cold-booted > from the ROM. > > LRESPRing again SMSQ/E v3.36 would definitely expose this, if the card > is seen after such a warm reboot. > > I'm posting again here (but in-lined, this time, since the list does > not propagate attachments) the (quick and dirty) patch I made for my > HD and SMSQ/E in EPROM, and which introduces a 5s delay before querying > the IDE drives on boot: > > ----------------------- > diff -durN smsqe336src/dv3/q40/hd/init.asm > smsqe336src-patched/dv3/q40/hd/init.asm > --- smsqe336src/dv3/q40/hd/init.asm 2020-04-16 09:30:29.000000000 +0200 > +++ smsqe336src-patched/dv3/q40/hd/init.asm 2020-04-21 21:47:22.000000000 > +0200 > @@ -83,6 +83,13 @@ > jsr hd_1sec > move.l d0,hdl_1sec(a3) > > + move.l d5,-(sp) > + move.w #250,d5 ; wait 5 seconds (250 frames) > +wait5s > + jsr hd_1sec > + dbra d5,wait5s > + move.l (sp)+,d5 > + > lea q40_wn1+2,a0 ; configured name > lea hdl_end(a3),a1 ; names lie after device defn (linkage) > block > bsr norm_nm ; copy & normalise name > ------------------------- > > Thierry. > _______________________________________________ > QL-Users Mailing List > _______________________________________________ QL-Users Mailing List
