On Wed, 27 Feb 2002 at 23:49:12, you wrote:
(ref: <TR5MHVRLZX94YKGCA5Y5YTQYTFDC.3c7de0f8@akm-desktop>)
>27/02/02 12:24:09, Dave <[EMAIL PROTECTED]> wrote:
>
>>On Wed, 27 Feb 2002, ZN wrote:
>>
>>> Are you sure? What was used to receive the serial protocol?
>>> I'm asking because I have seen the SQB schematic (long time ago) but don't
>>> remember anything like this. Are you sure they were not of the 'bus mouse'
>>> type, like used on QIMI?
>>
>>No, I'm not sure... I haven't even seen an SQB in 15 years :o(
>>
>>QIMI rings bells too.
>>
>>Dave
>>ql.spodmail.com
>
> Nasta is right. The SuperQ Board mouse was an Atari type just like the QIMI,
I found your docs, and although it is an Atari type, the QIMI pinouts
are different. You show both Atari and 'other' on your docs.
>but with rearranged pin connections on the 9 pin D type plug/socket.
> I worked all this out and published it between 1990 and 1992 after
>Tony Firshman volunteered me as a possible repairer for an issue 2
>superQboard which
>had been struck by lightning!
> I will have a rummage through my old floppy disks for the
>relevant files and post
>them here when/if I find them.
> Keith.
>
>
>
--
QBBS (QL fido BBS 2:252/67) +44(0)1442-828255
<1stname>@<surname>,demon.co.uk http://www.firshman.demon.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
