Thank you, Tony, I'll put this on the website and possibly in Toady to help people out.
>I knew I should not have done it so late. Pinouts are right, but >directions are worng. > >This should be OK (but I am not laying my life on - I am still tired >(8-)# ) > >===================================================================== >QL QL QL CABLE PC PC PC >ser1 ser2 COLOUR SIGNAL 25D 9D >===================================================================== >3 RxD 2 TxD white -> RxD 3 2 >2 TxD 3 RxD green <- TxD 2 3 >5 CTS 4 (DTR=RTS) blue -> CTS 5 8 >4 (DTR=RTS) 5 (CTS) red <- RTS 4 7 >1 1 black -- GND 7 5 >N/A N/A DSR 6 6 >N/A N/A DTR 20 4 >>==================================================================== = >This whole diagram is QL <-> PC only of course. >If you think of QL to 25D by pin number, then ser1 is 'straight through' >and ser2 is 'crossover'. That is always my starting point, and all the >rest can be derived from that.
