Phoebus Dokos wrote: > At 03:06 �� 17/4/2002, you wrote: > >> In a message dated 17/04/02 07:34:14 GMT Daylight Time, >> [EMAIL PROTECTED] writes: >> >> >>> Specifically I am searching apart from the ones that I mentioned on a >>> previous email the following: >>> >>> Sandy CP/Mulator (Have the Rom, Manual but DOA disk) >>> Eidersoft's Citadel (Dead CITA_CDE file... of course the largest :-) >>> just >>> my luck)
I can try and dig out and check my copy when I get some time. >>> Cuthbert in Space (The tape is cut :-(((( ) >>> The Pawn (I have that on a ZIP-interpreter compatible format but I would >>> like to get back the original - my cartridge is dead again) >>> Psion Chess and Matchpoint (Both tapes DOA) >> >> >> >> If you had looked at my web-site (tut-tut), you would have noticed >> that I can supply a copy of Psion Chess which works from disk. I also >> have a copy of the Pawn, but this does not do away with the need for a >> key cartridge (did anyone ever overcome this problem I wonder). Yes <grin> - oops, shouldn't have said that...firstly I disabled the need for the key cartridge on my working copy; and then re-instated it, using the other working cartridge as the key cartridge, instead of the master cartridge. > > > > Well it was REALLY late and what I really wanted to write specifically > for the PSION programs is that I do have a disk based version of Chess > but wanted the original copy protected version to put on microdrive. As > for Matchpoint I don't have an unprotected version and the microdrive > well the tape is totally dead :-((( The same goes (I need the protected > version to overwrite the tape which probably was left somewhere by my > parents (say close to a speaker's magnet!) when I was away as I was able > to format it with no problems... > As I said, I do have the Pawn usable and I am almost done converting the > Magnetic Scrolls interpreter so other games as Corruption, Fish etc will > be playable on the QL as well :-) > > >> As for the others, you can sometimes recover the files by using the >> old Miracle command: >> >> FORMAT ram1_mdv1 I have a problem with my Microdeal Sinclair QL FLight Simulator: the tape got corrupted somewhere in the data block and so one or two of the nine flight areas are unusable (once I get it to load...tho' the first attempt at using it unger GC was rather difficult: on the standard QL it was ok, flying a prop plane, but with GC inserted it suddenly changed into a super-sonic Jet - 2 secs after power up and lift off speed was reached, etc). I'll try that again, if not can anyone help me (by providing the missing data blocks)?
