Hi I thought removing the 68008 only applied to Super Gold Card, but was still required on the Gold Card?
Nice to hear your still there Ron Regards Mike [EMAIL PROTECTED] www.macnamaras.com ----- Original Message ----- From: "henk verbeek" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 19, 2002 9:46 AM Subject: RE: [ql-users] gold card and qubide > I did this but i still have got the same problem. I also tried another power > supply but all i get is a blank screen after the first reset. Could it be > the ql is not getting enough power ? Has anyone got a setup like mine > working ? > > Henk Verbeek. > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]Namens Ron Dunnett > Verzonden: vrijdag 17 mei 2002 20:03 > Aan: [EMAIL PROTECTED] > Onderwerp: Re: [ql-users] gold card and qubide > > > Remove the 68008 it is not needed anymore if you have a Gold or Super Gold > Card. > > That normally cures the problem you are having. > > Ron > > ----- Original Message ----- > From: "henk verbeek" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, May 17, 2002 1:36 PM > Subject: [ql-users] gold card and qubide > > > > Hello everyone, > > > > I have a standard ql with a qubide and a gold card. If i connect the gold > > card or the qubide separatly they work fine but as soon as i put them > > together (quibide first and after this the gold card at the left hand slot > > of my classic ql) the ql doesn't boot up anymore. > > I already tried the jumpersettings j3+j4+j5 and j3+j4 only but it still > > doesn't work. I know its possible to let them work together but how? Does > > anyone have a clue ? or do i have to buy an mplane or something like that > ? > > > > Henk Verbeek > > > > > > > > > > > > > > > >