Imho you can do all this in QMS. I fixed issue #33 this weekend, as I missed it myself while planning tours:
https://bitbucket.org/maproom/qmapshack/issues/33/add-a-summary-table-distance-ascent The typical work flow is: 1) Start a track with a right click on the map. 2) Now move the cursor to the next point. The map will pan automatically. You can use the mouse wheel to zoom. For a longer distance the automatic routing is a bit annoying. Switch it off with CTRL+O. When I reach the destination of the next point I switch it on with CTRL+A and place the point. 3) Repeat 2) until your tour is finished. 4) Save the track. In a track all intermediate points calculated by Routino will become trackpoints. Thus if you edit the track again, you have to use the range tool to select the section you want to change. Delete all points of the selection to get a straight line. Now you can add a new points to influence the route calculated by Routino. You can even calculate a selection again with different parameters selected for Routino. For example change the bicycle profile to foot, if you combine a bike tour with a hike. With issue #33 fixed you see the distance and ascend/descend for each change. And with the resulting track you get an elevation profile. So track drawing is as flexible as route creation. After all the line edit mode is shared by tracks, routes and areas. So I do not really see why I should create a route first, convert it to a track and so on. Give it a try. HTH Oliver Am 31.08.2015 um 15:53 schrieb Karl Karsten: > May be you can check for another option: > > Sometimes I am using http://brouter.de/brouter-web/ to create a quick > and dirty track considering length and height. > It is quite flexibel an you will come quickly to a track for a one-day > afternoon trekking ride. > Then storing the GPX file to disk and reopen the file in QLandkarteGT > for detailing and storing in my database. > > But you need internet connection and is not independent - like routino > in QMapShack. > > Karl ... > > > Am Montag, den 31.08.2015, 15:31 +0200 schrieb Lars Schimmer: >> On 2015-08-31 14:36, Oliver Eichler wrote: >> > Hi Lars, >> > >> > I am not aware that QLandkarte has such a feature. >> > >> > I have to admit that I hardly use routes. Mostly to get a time >> value for >> > long car drives. So I do not really have a clue what to do with them. >> > Especially as there is no way to transfer a route "as calculated" to a >> > device. >> > >> > I am interested in tracks. And that is the reason to put all that work >> > into Routino. Drawing a track is the same as drawing a route. It's just >> > a few clicks and the intermediate points are filled by Routino. >> >> Ok, maybe I am a bit confused about route and track. >> I would like to have 2 points on a map, calculate a route/track between >> those both and view the heightfield. This is useful for e.g. planing a >> trip with a bicycle and view the elevation to make on a day (and maybe >> choose a different track after seeing too much elevation). >> >> >> >> > Oliver >> >> >> MfG, >> Lars Schimmer >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Qlandkartegt-users mailing list >> [email protected] >> <mailto:[email protected]> >> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > Qlandkartegt-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users ------------------------------------------------------------------------------ _______________________________________________ Qlandkartegt-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
