I used to get that kind of dump from cistron radiusd when my old Netserver
card would try and authenticate a user.... came down to the radius daemon
was not set up correctly.
Recheck the setup.
Can you run radtest and get a failure? That would give you an idea if it
was a radius or perl or network problem.
Paul D. Farber II
Farber Technology
Ph. 570-628-5303
Fax 570-628-5545
[EMAIL PROTECTED]
On Thu, 22 Jul 1999, Gary Stewart wrote:
> Hello again,
>
> Once again, this is about the radius/chkpw project that I'm working on. As
> you may have read in my earlier messages
> I am trying to have qmail pop3 to authenticate via radius, and was running
> into trouble with the Perl version of radius-ckpw from the webpage. Now my
> issues are no longer in compiling the script, I resolved that by
> reinstalling the IO module in perl. but the problem i'm running into now
> (maybe this is a duh! thing) is when I telnet to the pop3 port, enter user
> xxx pass xxx i get -ERR Authentication Failed. I then checked my radius
> logfile and see this error:
>
> Thu Jul 22 16:02:43 1999: get_radrequest: non-RFC packet from
> 205.198.26.125[32815] - access (type 1), len = 43
> Thu Jul 22 16:02:43 1999: Hex dump at 0xa4850/0 for 43 bytes
> Thu Jul 22 16:02:43 1999: 0xa4850: 0x0000| 01EC002B 4A116302 C3DF2C8A
> 7BD54B82| |...+J.c...,.{.K.|
> Thu Jul 22 16:02:43 1999: 0xa4860: 0x0010| D116D3FB 01056764 730212E7
> 8AF58405| |......gds.......|
> Thu Jul 22 16:02:43 1999: 0xa4870: 0x0020| A46147F9 4F9A14B6 BCA5A7..
> ........| |.aG.O......||||||
>
> Anyone have any idea on what is causing this problem?
>
> ----------------------------------------------
> Gary Stewart [EMAIL PROTECTED]
> Internet Service Specialist
> Northern Valley Communications
> (888)919-8945 http://www.nvc.net
> ----------------------------------------------
>
>
