Hi everybody,
The qmail-smtpd is very slow.
When I telnet to port 25 of 127.0.0.1 (or even localhost), no problem
# telnet 127.0.0.1 25
Trying 127.0.0.1...
Connected to 127.0.0.1
Escape character is '^]'.
220 redtest.logicaonline.com ESMTP
I mean: the answer is immediate;
but when I try 192.168.254.99 (the IP address of the netcard), I obtain
# telnet 192.168.254.99 25
Trying 192.168.254.99...
Connected to 192.168.254.99
Escape character is '^]'.
(up to 60 sec delay here, and then)
220 redtest.logicaonline.com ESMTP
any idea ?
I use tcpserver and I also start it with -H and -R flags (I have already
followed the instructions in the qmail mailing list archive at
http://www-archive.ornl.gov:8000...)
I have also edited /etc/host.conf, leaving only (before was "order
hosts,bind")
order hosts
multi on
I run qmail ver 1.03 under RedHat 6.1 (amd k6 processor, 64MB).
Thanks in advance
Luca
__________________________________________________
Luca Zancan
Logica S.r.l.
e-mail [EMAIL PROTECTED]
URL http://www.logicaonline.com
__________________________________________________
